Recently active
Apparently, the geometry of a standard hole countersink is incorrect on a curved or round surface. The size I enter (which becomes its callout on a drawing) becomes the major dia of the resulting ellipse - but the countersink is to be measured across it's minor dia (ASME Y14.5-2018 4.5.13). I didn't pay much attention, but now with 3D printing and other rapid prototypes - it has become a problem: the actual physical countersink is too small. Is there an easy method or fix other than creating a plane and modeling a revolved cut in the correct orientation?
Hi,I'm interested in simulating the squeeze of a hollow hemisphere.I'm unable to run this simulation because there is only one element (the tip of the ball) at the start, and other elements come into contact with the squeegee as it moves. I attached the model, and I'm not sure what I'm doing wrong?I'm grateful to anyone who can help in advance.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? WF4 to CREO82. What is the problem?The main problem is having the maximum dimensions of the piece for these reasons:1) I have to define the measurements of the blank to purchase.2) I want to define an automatic drawing procedure.3) I also want to have a cost price for the processing of the piece.I happen to have up to 100 parts to drawing and estimate.I need three numerical variables X Y Z that define the dimensions of the piece andother that definition its position in space referred to the main coordinate system (CSYS).3. Are you using a workaround? If yes, please describe it.Currently I draw an overall curve on the plane normal to the Z axis which mifrom two dimensions X and Y and then another curve on the plane normal to the X axis which gives me the Z dimension. Then through the relationships I create the parameters for the report withthe dimensions of the blank a
Hi all, OK, so I have a simplified rep, and I now have some welds showing. (Floating in space).. The parts these welds are attached to are both 'excluded' from my simplified rep, and 'quilts' are turned off. Yet they now appear in my dwg / dwg view. And I can't seem to turn them off.. The welds were added after the simplified rep was created, and also after we upgraded to Creo 9 (from Creo 3, not sure if that has anything to do with it..) But I have a dwg of some panels & their associated screws, and now I have some beefy welds floating around in the views.. Any ideas on how to remove them (and not do the 'erase line by line')
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo 7.0.9.02. What is the problem? When changing to a split quantity balloon to a custom balloon to support ISO standard balloons any split quantities are not kept. The initial balloon receives all the quantities minus the number of balloons for that component.3. Are you using a workaround? If yes, please describe it. Manual work to redistribute the quantities again.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. In one example it takes approximately 90 minutes to make this update due to the number of balloons and their locations on multiple sheets.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) Many users (200+) will spend probably an average of 20 to 30 minu
when parameter “m” is not integer, the curve is failed to regenerate.
Hi all, Looking into a need where detailed construction drawing would sometimes be plotted to pdf on A1 and A2 size format by Worker, other times on A3 or A4. Going on paper size only is not a solution for differentiating contour line from the dimension line, as paper size can also be used for assemblies, etc. requiring other pen thicknesses. One suggestion is using different drawing format templates. Is there a way to connect format to specific pen table? Or any other smart solution someone already has arrived at? Pen table decides thickness.Pen table file can be pointed to in config.pro (if not storing in default location).Format neither calls for pen table, nor config.pro to be used.Pen table can also be selected in a plotter configuration file (pcf file)Only one pcf-file can be pointed to from the Recipe (.rcp)Would programmatic approach be needed (even possible to catch this?) on Windchill side in any way based on format? Using different Workers for differ
Hi,I have SLM 3D printer of XACT Company. I want to connect with Creo. please let me know how i can connect with Creo. Xact Metal | 3D Printing Software
Hi, trying to understand how to get what I want. While I have options, nothing seem to change when various option are chosen.. 1) I made a chain flange to have a nice flange about the 2 sides of an 'L' shape. It then makes the flange, and creates both a corner relief and a mitered cut. If I choose "closed" I get a closed off corner, which is what I believe I want. But it does give a bit of a weird shape on the flat pattern. It also gives a gap. The end of the gap isn't really 'tangent' to the inside of the corner bend radius, which I would have expected. Now, if I have an open corner, the gap creates a little 'tooth' on each side of the mating mitered flange edges. (See mitered.jpg) I then need to do an unbend / bend back with an extrusion cut to remove these "bits", and get a simple 45°cuts on the flat pattern.. (See miter 2 & miter 3.jpg..) 2) while I have options to vary the corner relief, nothing seems to change with option
Please PTC, please remove this ridiculous limit... it's 2017 for God's sake....
Hi All,We have a classroom with 41 workstations. Which is better: a local Creo installation for each class or a network installation? Our licenses are FLEXnet Thanks!
Has anyone found a solution for making better welding symbols in Creo? The default symbols are STILL in Creo 10 just horrible.It seems that the symbol definitions don't support lines changing length automatically. So that results in either too long or too short elbows for the symbol.I think that is why the default symbol is defined with the maximum reasonable length of the weld note, which makes it useless when you want to just give a simple weld note:I found out that you can use grouping in symbol definition to hide or show parts of the elbow depending on whether the length of the weld and/or intermittency is enabled:But this solution does not work when the leader is on the other side, because you cant make the leader origin to change position depending on grouping:Has anyone managed to somehow create a GOOD welding symbol in Creo with modifiable elbow length?Or is the only solution to just create different symbols for different amounts of information: One symbol for simple note with
what is the purpose of the mark up tab in Creo viewer. If you can't save the mark up that were created in the 3D model in the viewer? I've added leader notes to the model, and I want to send it to a co-worker. So he can see my notes. He can only see the model but not my notes. He also would need to rotate the model for other notes. in back. Is it even possible? Thank You Juan
I need the procedure to apply the moment load to this shaft. I cannot find anything on how to do this. I even tried two different AI website to try to find an answer. Neither site gave me an answer. What features? How applied?
I am using the Creo Parametric 5.0.0.0I am using the ProTK Toolkit APIS to get the information from the model.I have a PVZ model where it looks like this model has facets data and no surfaces in it.To get the geometry data from the surface we use ProSolidSurfaceVisit which gives a call back to user defined function with surface as argument. I am trying to get the Facet data by using the ProSolidFacetsetVisit API, I am getting the call into the call back function with the facets set information and app data information.Can anyone help me to get the geometry data out of this facets set,Its better if I get a sample code fetch the geometry data within the callback function from Facets. I have attached the sample model PVZ part file. Thanks and regards.
Hi All,I have a sheetmetal part that I want to mirror and keep the geometry dependant, but for the mirrored part to exclude the logo feature.Scenario:Part1_LH is the original part is a left hand configuration. This part has the company logo on it with a 'L' handing callout for the left hand configuration assembly etched in to the surface.. Part1_RH is the mirrored part and is a right hand configuration, but the company logo and the L callout is reversed. What I want is to mirror the part and keep it dependant and have the logo on the mirrored part in the correct orientation. Is there a way to exclude the logo and handing letter from the mirror part function so that I can add the logo and the 'R' handing callout onto the mirrored part? I know that I can convert the original part to a solid as a quilt, and mirror that part , then fill in the mirrored logo and re-apply the logo to the mirrored part but I want to keep the parts in sheet metal and dependant.
I am using Creo Parametric Release 5.0 and Datecode5.0.6.0 Software version: Creo 5.0.6.0, File-Preparation-Model Properties-Tools-Shrink, click Change, the menu manager cannot pop up, and it does not jump directly. How to deal with it? The rest of the changes are clickable.Here are the errors that I faced Unable to pop up menu manager---------------------------------------------------------Translated the text from Simplified Chinese to nglish using Google translate.Subject - 无法弹出菜单管理器Body - 软件版本:Creo 5.0.6.0,文件-准备-模型属性-工具-收缩,点击更改,无法弹出菜单管理器,直接不跳转,请问如何处理?其余的更改都可以点击。无法弹出菜单管理器。- By Community Moderation Team---------------------------------------------------------
Hey, I wanted to ask if anyone knows which settings increases the distance between automatic dimensions. I am trying to pick the ones I need but they are just stacked on each other. I was trying to search through drawing settings and test every config named "offset" or having some value but couldnt find anything working. Cleaning up dimensions working okay, but I need to be able pick them out first.
Hello, I have installed Creo 8 and choose to also install the c++ and java toolkit. When the installation is done, when I go to: C:\Program Files\PTC\Creo 8.0.1.0\Common Files\otk\otk_java, I dont have the library files, I have only the otk_java_examples ,which have all the example files. But for the c++ toolkit folder, C:\Program Files\PTC\Creo 8.0.1.0\Common Files\otk\otk_cpp, I have all the library file and code examples..Did I miss a step for the Java toolkit installation ?? Thank you
After downloading Creo 10 student per the directions given in the instruction PDF, I have continued to get the two errors in the image below. The 1st error says "Creo Agent did not initialize correctly. Please contact Technical Support if this issue persists." which is followed by "Creo Parametric Student Edition (for educational use only) is shutting down because it could not run the Quality Agent, which is required in this edition. If you call Technical Support about this problem, report error 0x06000012." I have tried deleting/redownloading Creo-10, as well as Creo-8. I tried looking through the Community forums, but no luck yet. I didn't have any initialization issues when I first downloaded Creo 8 a year ago, and I don't recall "disabling all firewall, anti-virus, and anti-spyware software" when I did that download. For this reason, this error feels either new in general, or might have something to do with me already having Creo 8 previously (even though Creo 8 is comple
Hello,I have a simulation including a stationary body and a moving body. There is a contact between them. I often see the warning: "Excessive displacement at contact region". A software suggests smaller time step but I can not reduce it. The full moving process is described with 100 step and the software does not allow to define more...1. What does it mean exactly the excessive displacement at the contact? Is the time step too large compared to distance between two mesh nodes? If I increase this distance (element size) - instead of time step reduction - is it correct?2. How can I define more steps under "User define output step"?Thanks a lot your help;Roland
How do I remove the errors Tool parameter TOOL_ROUGH_SPINDLE_RPM (used in relation): value undefined. and Tool parameter TOOL_ROUGH_AXIAL_DEPTH (used in relation): value undefined. I already do the following...1. In the Tool Manager I add spindle speed and feed and radial and radial depth.2. In the parameters I remove any relations with these variables.
Currently I have a contact model that consists of two separate bodies. One body is fully fixed and assigned a linear elastic material with steel properties. The second body rests on top of the first and has a fully defined elasto-plastic material. This was defined using developed test data. My problem comes when I am trying to enable "Plasticity" in the static analysis. The option is completely greyed out and unavailable. The material is both assigned to the model and to the correct body. Has this issue been reported previously or is there something I am missing? I have tried a variety of solutions such as assigning all bodies the same elasto-plastic material, suppressing features that could cause issues (grounded springs/Links). Neither solution yielded any results. Even when using the elasto-plastic material definition I receive the same error seen below. Note: EP is shorthand for elasto-plastic for my naming convention and the material it is referencing does have an EP ma
1. What product and version are you running?We have customers from CEDM 20 to 20.62. What is the problem?When adding a lip in to a plate when there is a big assembly loaded into Modeling, Modeling reacts very slow to these action. Same as adding a workplane etc. This is a huge performance issue.There is already a case logged for this: Article - CS391325 - Adding a lip leads to a poor performance in big, large assemblies in Sheet Metal in Creo Elements/Direct Modeling (ptc.com) The designer needs to wait until this command is done before he can proceed working. We had examples that a designer needs to wait 20 seconds before continuing. This is something that wasn't a case in version 17-18.1 and came in on version 19.3. Are you using a workaround? If yes, please describe it.No, there is no workaround when working with big assemblies.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Th
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.