Recently active
Hello, everyone. More than a question, this is an open topic: Does somebody know a reason why the piping application has not been updated in all these years since Pro/E became Creo? There has not been any change in the way to do piping. I know, some people use to do by swipes and extrudes, others use piping app, and others do spec. driven. But in general, we have had enhancements for manufacturing, electrification, sheet metal, ... And what about piping? Anything? Competitors are WAY FASTER AND SIMPLIER to design routed systems than Creo (for piping/tubing). Will this post be seen by PTC people someday? Let's discuss in the comments.
Hello, I on Creo Parametric 8.0.9.0 Is there a maximum amount of columns in a hole table of datum points? I would like to add over 23 columns to the hole table of datum points.I added a bunch of parameters to the datum point feature. These parameters should show up in a table on the drawing. A hole table of datum points is used. And an export of this hole table is needed as input for another application. While doing this, only 23 parameters, including the standard the standard 'Feature Name', 'X', 'Y', 'Z' can be included. When adding more parameters, to show up as column, Creo crashes. A fatal error is encountered. So I was wondering if there is a max to the number of parameters to be added? Thanks for any reply, Johnny G
int* ids = nullptr; ProArrayAlloc(1, sizeof(int*), 1, (ProArray*)&ids); ProArraySizeSet((ProArray*)&ids, 1); ids[0] = 40; int wHandle; if (ProWindowCurrentGet(&wHandle) == ProError::PRO_TK_NO_ERROR) { ProMdl handle; if (ProWindowMdlGet(wHandle, &handle) == ProError::PRO_TK_NO_ERROR && handle != 0) { ProMdl prdMdl; ProMdlLoad((wchar_t*)L"prtpath", PRO_MDL_UNUSED, PRO_B_FALSE, &prdMdl); //the function can't work on asm->prt //asm->prt is work ProAssemblyAutointerchange(ProMdlToAssembly(handle), ids, prdMdl); } } ProArrayFree((ProArray*)&ids);
Hello community members, This is my first post on this forum. So i hope this place is somewhat active.I have an issue where my assembly is loaded many meters away from the origin.I can fix my issue by moving the parts within the assembly to the origin.But then a more annoying problem arrises.Now my origin is correct when loading in the model. But when I go to create a view in my 2D drafting environment, my origin is now still at the original location.And my view becomes hard to allign to other views. So my question is: When and how is the model origin decided? And can I change this within an existing model that is saved in a database?
I am using Creo Parametric Release 4.0 and DatecodeM150We currently face a challenge in opening “.lay files”.Is that part missing in “PROE_DesignEssG”Here are the errors that I faced"this funcion requieres one of the following:NOTEBOOK
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 102. What is the problem?When measuring volume, the measurement value in Liters cannot be obtained directly.3. Are you using a workaround? If yes, please describe it.Option 1: create a Liter parameter, an analysis feature based on the measurement, and a placement relation with unit sensitivity. Creo performs unit conversions automatically.Option 2: Add the line "standard_unit length dm 0.1 m" to the units.sup file to define a new unit called "Decimeter" (dm).4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Allows to automatically receive a volume measurement in units of Liters. Very useful in BMX.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)The existing options are very inconvenien
I am new to creo and the creo family of products. When I create a cdi from the pvz and attempt to save the illustration, create a mp4, etc., I get the manifest is missing error. I am working on a pvz on my desktop outside of plm to experiment with animations as my company is working towards adding animations to for our service techs. I found an older topic about deleting the cache to fix this error by going to %APPDATA%\pts\illustrate, but I cannot find this location in CREO 10. It has become frustrating as I put work into these animations and I basically am losing all my work. Thanks in advance.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.4.02. What is the problem?We need higher quality display of motion envelopes.Refer to article C17311758.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Creo already has similar functionality in its STL export functionality. Being able to define the chord height would enable users to guide Creo to produce a smoother motion envelope that more closely represents the volume.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) More accurate and useful motion envelope model that can help users to avoid interferences.
i want to relate symbol with view by using C# and VB api. any one know solution give me a help.
CREO 10 CAN YOU COMPLETE A SWEPT BLEND (OR ANOTHER WAY IF THIS IS NOT THE CORRECT FEATURE) FROM A PLANER SKETCH TO A CURVED SKETCH, OR PROJECTED SKETCH ON A CURVED SURFACE? HIGHLIGHTED IS THE PROJECTED SKETCH ON THE LARGE BODY, THE CURSER (SMALL RED LINE) IS THE OUTSIDE SKETCH OF THE DUCT. FOR THE DUCT, I MADE THE BODY WITH A SWEPT BLEND. HOWEVER, I NEED TO ADD AN OUTSIDE THICKNESS LAYER WHICH WILL STOP AND CONFORM TO THE OUTTER SURFACE PROFILE OF THE LARGE BODY. SO BASICALLY, I NEED TO CREATE A LOCATION STOP/SUPPORT FOR THE DUCT (THIS IS REASON I NEED TO ADD EXTERIOR THICKNESS TO THE DUCT), THIS WILL ALLOW ME TO PRINT THIS SEPERATE (IN A DIFFERENT COLOR) AND ASSEMBLE IT TO THE LARGE BODY. IT IS CRUCIAL FOR ITS LOCATION AFTER ASSEMBLY. I CANNOT PERFORM ANOTHER SWEPT BLEND FOR THE EXTERIOR TO CREATE THE THICKNESS BECAUSE THE SWEEP WILL NOT STOP AT THE CURVED SURFACE. WHAT ELSE CAN I TRY?? ANY HELP IS APPRECIATED.
Hello, I'm trying to upgrade to Creo 10. I received my license text files through email. I went to the software download page and got the latest version of Creo 10 (Version: 10-0-4-0) and downloaded the .zip file. The problem I'm having is that the setup.exe file does not seem to work. When I double click or right click>run as administrator nothing ever happens and no installation window ever opens. However, when I go into Windows Task Manager I see a process called "PTC Installation Assistant" which is running. If I don't end that process I get an error when trying to re-run the setup.exe file which states "Please exit the already running installer or uninstaller first." I was able to successfully run the "install_license_server.exe" and it recognized the license lm___.txt file and installed the license server successfully. That does not seem to help getting the setup.exe file to work. I'm running Windows 10 Enterprise. I've seen a few possible solutions on this foru
For reasons of convenience I would like to have a closed surface where one of the edges is open in Creo Parametric. A simple example could be a surface of revolution that is swept 360 degrees but has a open edge where the surfaces meet. Below is a artificially created image, where the sweep angle is close to but not exactly 360 degrees. Revolved surface with open edge (but not quite closed) So i am wondering is there: A way to split a self enclosed surface at one and only one edge?A way to merge only said edge and not all edges?Convert inner edge to outer edge?This would be handy at times.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1 and 10.1.PVZ is made with modeling worker.2. What is the problem?After loading a pvz, all containers are visible.After choosing “open in new window” in CreoView, all containers are visible.3. Are you using a workaround? If yes, please describe it.Filter all *.sdccSelect allHide all selectedThese actions must be carried out for each new window.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Containers are additional “assemblies” with special contentA preference for Creo View to switch them generally on or off as default would help – similar to the Modeling behavior. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)After loading a pvz, the view is overloaded and the users in producti
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1 and 10.1.PVZ is made with modeling worker.2. What is the problem?Modeling has a special feature – “selective independent”.A PVZ cannot process this information. 3. Are you using a workaround? If yes, please describe it.No workaround possible.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.If using an assembly “A” two times in assembly “B”, you can show/describe with the feature “selective independent” different positions of the parts in assembly “A”. This information is stored in assembly “B”.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)All visualizations of new and migrated objects are wrong.People in production have no chance to view the correct situation.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1 and 10.1.PVZ is made with modeling worker.2. What is the problem?It is not possible to collapse or expand instanced based parts.There is a preference in General/Navigation “Collapse instanced based parts so only one is shown in the tree”, But this is not very helpful, because after selecting this preference, you do not have the option of selecting an instance-based part of the tree.3. Are you using a workaround? If yes, please describe it.No workaround possible4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.With collapse/expand you have a much better workflow, and the tree is much shorter.if using 1000 screws in one assembly => 1 line or 1000 lines.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost
Hi,I am attempting to include my custom component as a connector in the AFX library.In the script tab file, I'm adding connector references for assembly. When I try to assemble that connector and the connector references are in the hidden state, afx displays an error.For example, if I refer to a plane from a connector for assembly and the plane is in the Hide state in the connector component, afx will fail to assemble it.We are using Creo 8 and Creo 10.We use MBD for parts and ensure that all datums are hidden for the Model_only tab. Anyone know how to use connector references, even if they are hidden ? Your help is appriciated.
Hi,to automate the drawin of numerous part, hasanyone made a Creo toolkit application that can generate max dimensions for a given 3D model?3 parameters must be generated in the 3D modelMAX_LENGTH_XMAX_WIDTH _YMAX_ HEIGTH_Zand coordinate of max points alwais referred by coordinate system (see example measure transform) ?Thanks for your time, Luca.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1 and 10.1PVZ is made with modeling worker.2. What is the problem?After choosing a viewable in CreoView, not only the necessary layer is visible, also other layers incl. free measures are selected and shown in the viewing window.3. Are you using a workaround? If yes, please describe it.Deselect all layers and choose the viewable again, then only the necessary layer is shown, but after processing the action “open in new window” show all layers again.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This viewables are prepared for example for production people, to see only necessary parts, measurements and viewdirections regarding special situations.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity,
I was using Creo (v10) under a school given license for about 4 months. Since this license only worked at campus and I needed more time to work, I decided to add the online student license that my friends recommended to me. At first, it was not working and continued to operate under the school's license and did not work away from campus. Then I went on my desktop to Creo open file location> Reconfigure. Here I went to the licensing page where I only found the student license. I accepted and went through with everything hoping that Creo would now work under the student license like how I wanted it to.Instead, now every time I open Creo it says that I must register the Quality Agent for Creo to keep running and when I allow it to register it it says that Creo is shutting down under code 0x00000013. It might be helpful to note that when I first installed the student license under my laptop and it did not work I installed it on my PC and did a project on it meanwhile. Th
1. What product and version are you running?We are currently working with Creo Parametric 7.0.11.0 and Windchill 12.0.2.11. 2. What is the problem? In addition to our own requirements, this idea also results from the PTC article CS289412. If you have already registered a Windchill server in Creo Parametric and logged in there, there is no way to adopt this login credentials in a Toolkit app and access Windchill data using the REST API.The workaround described below must be used for each additional Toolkit app.After a password change, which must be done every few months by all users in our company, this means that the new login credentials must be entered several times after the Creo start.This is very inconvenient and cumbersome for the users and does not meet with their understanding. In addition, extreme care must be taken when programming a login data query and saving the login credentials to ensure that no mistakes are made in terms of security. It would theref
I'm trying to simulate a constraint on a part fixed with a screw in an oblong (as shown in the image below). The idea was to constraint the region where the screw head reaches, because the diameter of the screw is smaller than the hole. Is this way correct? I'm getting high tension points when simulating, making the part not able to withstand much force in the simulations. I don't have an Advanced Creo Simulate license to use Fastener or Preload tools.
“You may wonder what kind of vehicle is next for Club Car, but the answer is that the future is here, the future is now.” Known for its brand of gold carts, Club Car is at the forefront of electric vehicle innovation, reinventing utility vehicles that work just about anywhere you can think of. They're all about designing vehicles that are fun, practical and of course eco-friendly, and you can spot their rides zooming around golf courses, resorts, farms and even college campuses. In this episode, we meet Dan Dykstra, who takes us on an immersive tour with the CRU, allowing us to experience first-hand the thrill of cruising around in this innovative vehicle. We delve into the versatility of the CRU, from leisurely backyard adventures to practical urban roaming. And we learn about Club Car’s dedication to electric vehicles for sustainability. We also hear from Brian Thompson, who heads up PTC’s CAD division - he explains the importance of Simulation Live and ho
hello,i am currently using creo 10.00.00 while designing in creo for palm feature i have to use scroll button with shift button at a time how can modify the setting such that i can only use scroll button for palm feature in options mouse setting is not visible and in config.pro also i couldn't find any possibilities Help Me
Creo Mechanism doesn't use computer resources Sometimes when creating bigger simulation with non linearities creo mechanism doos simulate this but very slowly without using computer resources. how can i fix this.Used friction, nonlinear forces derived from coordinates.
In structural simulation, as my understanding that plastic deformation will lead to large deformation. In Cero Simulate, it is allowed to perform plastic deformation with large deformation deselected. What are the differences between the following structural analysis conditions?1. Only large deformation is calculated, plastic deformation is not calculated.2. Only plastic deformation is calculated, large deformation is not calculated.What is their actual physical significance? Are there any practical cases?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.