Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0.5.0 with Windchill 12.02. What is the problem?There are some situations where Checkout on the Fly pops up more than once. It can happen during large assembly regenerations, but notably happens when saving a backup to disk while modelcheck has things to do on save. In these cases, especially when combined with Modelcheck, you can get Checkout on the Fly, one by one, for every object in the assembly (because it's becoming "modified in session"). One - at - a - time. When this happens you can't even interrupt the process. You're stuck in it for the long haul, or you exit with the task manager. It needs to wait, see what all is affected by the entire operation, THEN present you with the checkout options. (function() { var wrapper = document.getElementById('lia-vid-6352472817112w996h540r373'); var videoEl = wrapper ? wrapper
Hello, I am trying to create a map key that will auto create the new "enclosure volume" feature then take its x,y,z dimensions and add them to a parameter in my bill of materials. My biggest issue is the enclosure volumes parameters have an "internal feature ID" attached to them and is unique between components if I want to reuse this map key which then causes failures in the relations for PTC_BBOX_X:FID_(should have an ID number instead of stars.) I tried to incorperate copy and pasting the the feature ID from the feature information but that part of the map key doesnt work as it only pastes what was copied when map key was made. I also tried inserting the bounding box parameters in the map key and that failed as well because it cant find the parameters agian because of the internal feature ID. Here are my current Parameters:FINISH_SIZE stringXR real numberYR real numberZR real numberX stringY stringZ string Here are my relations:XR=CEIL(PTC_BBOX_X:FID_****,3)YR=CEIL(PT
Hello everyone, I'm trying to find a way to show the file save iteration number in a drawing in Creo (Version 4.0 and higher). It will be used for projects without a PDM system to show the exact save iteration, in addition to a revision parameter.For example for a drawing of a part named DUMMY.PRT.35 I would like to extract the number 35 either directly in the drawing and show it in a note -or- in the part model by placing it into a parameter I can reference in a drawing note.I haven't found if this is possible somehow. The rel_model_name and model_name parameters do not seem to provide this functionality?Any help is appreciated!
This month’s challenge is a part design problem based around curves and sweeps: Using part modeling features, design a twisted wire pair that passes through at least three non-planar points. (Bonus) Using Flat-to-Screen 3D Annotations, create parametric notes so that a user can modify the twisted pair. For example, diameter of the wires or rate of twist (similar to the pitch of a helical sweep). Is your modeling robust enough to handle dimension changes? (Extra) Model 2, 3, or 4 twisted pairs that travel along the same trajectory, similar to a CAT6 cable. (Super Challenge) Can you make two twisted pairs that twist around each other? Post a picture or pictures of your work as well as the models. Indicate what version of Creo you used. This challenge is based on a technique I saw in a PTC newsletter 20 years ago, so this can be done using a standard license of Creo (or even Wildfire or Pro/ENGINEER). Note that this is NOT a cabling challenge; you should use part modeling featur
Hi everyone. I am unable to create an animation in CreoView. I am new to CreoView and I'm not sure if we have to first create an animation in Creo parametric and then import it into CreoView.If I click on 'Advanced' option in CreoView, I get the message "The animation (edit) license is not available at this time. Can someone please help me with this issue. This option will really help me in assembling the components together.Thank you in advance.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.12. What is the problem?When using Creo View to open Creo Parametric native drawing that has multiple sheets, Creo View will only open the first sheet. All other sheets show as Blank with no data.3. Are you using a workaround? If yes, please describe it.Yes, the current workaround is not really a usable process but it requires the user to first open the Creo Drawing and update all sheets of the drawing before saving to disk, once this is done the drawing can be opened displaying all sheets correctly in Creo View. This workaround is time consuming and completely makes the ability to open a multi-sheet native drawing in Creo View unusable.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Ability to open the native drawing and all sheets correctly or provide a
1. What product and version are you running?Creo View and Creo View Adapters 10.12. What is the problem?The "Assigned Choices" for Configurable Product components are not visible in the Windchill published viewable.3. Are you using a workaround? If yes, please describe it.No workaround in use for this issue. Non-linked configurable products (not Windchill linked to a variant specification to prune the assembly) use an assembly parameter to track the options available. This parameter is added/updated manually and is prone to mistakes.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.As more of our models leverage Configurable Products with Variant specifications, the assembly parameter is no longer updated but we would still like to be able to see the options in Creo View. Instead of copying over the assigned choices into an assembly parameter, it is preferred to just display the choices available.&
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.4.02. What is the problem?Drawing/Model detail option setting - 'datum_target_area_multiply_sign' set to "capital_x" (default) - not in conformance with ASME Y14.5. ASME Y14.5 states that, in the Use of "X" to Indicate "By", a space is to come before and after the X. The Creo solution for the "capital_x" option value does not provide such spaces for the target area types of Rectangle and None. This misalignment also exists pre-Creo 9 - a detail option to change the display doesn't exist, but the standard display for Rectangle and None target area types does not include spaces before and after the "X" symbol.3. Are you using a workaround? If yes, please describe it.Workaround could be to manually generate local note to supplement symbol display in order to get full specification to align with ASME.4. What is the use case for your or
I'd like the "T" shortcut to permanently be mapped to a command, not a map key. So I click on the command option. However, whenever I restart Creo, it forgets my selection and this dialogue box appears again. How do I make it remember my selection by default (automatically)? I am running Creo 10.
I just want to be able to undo anything I just did in any area of Creo (like every other program I have ever used). Details: Currently it works really well (as it is supposed to) in Sketcher mode but other than that it is closer to a joke. First day I train a new person to ProE/Creo I tell them save often and don't expect the undo command to work (when it does work it is like winning the lotto). I go to move multiple draft entities but because it may be a short line I selected Creo assumes that I wanted the endpoint and it ends up extending the line in an impossible way to undo (even when I still have it selected I cannot unselect it...it is too late)...I cannot undo! I think we could all add our own examples of not being able to undo in various areas of Creo, so feel free to add some more in the comments area. Please make undo work in all areas of Creo.
Hi all, I was looking at getting some guidance with simple assembly within CREO. I've been tasked to a create an assembly in which I am given 2 complete parts as well as am required to create a third part for this assembly. When creating the third part of the assembly is should be drawn that A1 = B1 and A2 = B2, meaning that this component updates automatically depending on the modification made to the first two components which exist in the assembly. How do I go about this? Do I create a seperate brand new model and then add this to the main assembly. OR should I assemble the first two parts together and then create a new part within this assembly. This is to made made that no clashes or gaps happen within the main assembly model
Hi, everyone. I thought Creo 9 supported semantic references when exporting to STEP AP242 format, but when trying it myself I couldn't get it to work. When I finally looked at the video in the "What's New" documentation and tried to replicate it, I got it to work, and I suddenly realized that the text was carefully written to only mention "notes" (though the title was "Improved STEP AP242 Support for References Included in Annotations"). So just to check that I'm not missing anything, for people who have more insight into this than I have: Creo 9 only supports semantic references in STEP export for note annotations, and not for dimensions, geometrical tolerances, etc.? Really seems strange to me; I would have thought that it would be just as easy to implement this for any kind of annotation, so this omission sounds unnecessary. But then I'm not a programmer.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. Marine 2. What version of Creo Parametric are you currently running?Creo 5 moving to 8 soon 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Ease of use in cabling UI It is frustrating when launching a new session of creo, i go to route cables and they get routed outside existing bundles. I have to cancel out and go to the SETUP and throw that switch every time i start a session. Can you move it to the ROUTE CABLES dialog? 4. What is the use case for your organization?removing wasted time5. What business value would your suggestion represent for your organization?remove wasted time
Cabling Location points are hard to see (See Location Points.png). The Edit Definition look of location points were updated with Creo 7 and that looks really good (See Creo 7 Location Points.png). This request is to extend the location point visibility function to make the default points more visible as well and make this the same for all location points. Possibly make edit vs the default points highlight in a different manner for distinction.
Please include detailed documentation such as screenshots, images or video.Add ABOUT.. to the terminator table dialog-shows the last known path, file name & date the .csv was loaded.1. What product and version are you running?Creo Schematics 102. What is the problem?want more information about the terminator table used and when it was loaded.3. Are you using a workaround? If yes, please describe it.none4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.save time and organizing the terminator tables5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) i think it would be nice to have. not detrimental to organization.
Hey, Is there any way to fix a 3D annotation to a specific offset from the model.. Please see picture below.My problem is, when i change the length of the ø50 cylinder part the dimension gets hidden in the solid model. I want this dimension to follow the model, instead of just staying in its place. So far i have not been able to find a solution to fix this, I am running Creo 10 btw!Thanks,
1. What product and version are you running?Creo Parametric 9.0.7.02. What is the problem?It can be tedious and repetitive to select surfaces to add to an annotation's semantic references to support Model Based design. It would be helpful if there were tools to create an manage "Surface Selection Sets" which could exist as a Custom Group to be able to be selected while defining an annotation or applying model color, etc...There is a related selection tool improvement request which will help, but a "Surface Selection Set" capability would also be a good complimentary capability.3. Are you using a workaround? If yes, please describe it.No, just many many clicks.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.For a relatively small design I needed to select 267 surfaces to include a surface treatment note. Then I will have to click that again to apply a special profile tole
I was using the "Check Pin Numbers" tool while verifying my BID-WID diagrams, and I noticed that every one of my components has one extra pin (according to the tool, anyway). All of these components are made with a variable group connector and datatables, and each one only shows 6 pins. I've checked their properties, tried selecting children, and using the reorder members tool to make sure none were hidden or disabled. The only thing I can think of is that Schematics is counting the Block Port as an additional pin on each component. I don't think this will stop me from exporting but it is a bit confusing. Should I just ignore it, or is there an easy fix?
From time time to time, especially when working with large assemblies, there is a need for a tool in order to quickly investigate the assembly - in term of performance. those will include the possibility to some of the main point of interest such as: Open Performance Open Summary Details of the Open Document File Previous Version References Modified on OpenDisplay Performance Graphics Triangles Shaded Image Quality Display Speed Appearance Components Far from OriginRegen Performance Regen Data Unavailable Regen Report Mates Assembly Regen Report this tool will enable the user to identify issues quickly and improve software usage and satisfaction.
When importing a non-native file, in my example from Inventor, the assigned mass properties are not being transferred to Creo.Feedback from PTC support is that this is technically not possible.Screenshot showing assigned mass prop in Inventor:Trying out the sollution first suggested in the support article did not seem to be working. This product idea does suggest continuing with such a technique.If the assigned mass property would be copied to a designated custom property in Inventor, then an interface could be provided in Creo Parametric , such as a configuration setting that would enable the value of a fixed parameter (f.e. FINSIHED_WEIGHT) to be copied over as the assigned mass property. Mind that this example above is a simple block, but purchased components that are used as (multi-body) parts need this assigned mass property to have a correct weight in assemblies and further along the line in PLM.Below an example of such a part. Referring to article CS3847
Hello dear colleagues, I wonder if you guys could help me out with this constraint in Creo Parametric 9. I designed this slot feature and I have this screw that I want to place there and have 2 degrees of freedom, one translation back and forward in the slot and another rotation around the screw axis. What types of constraint should I use? I tried Pin and Cylinder but I could not make that work. Thank you so much for the help!
There is an issue we are facing during PDF export from CS 7.0 compared to previous version CS 3.0 (used before CS 7.0) as mentioned below. The exported PDF from CS 7.0 (15MB) file size is 3 to 5 times larger than CS 3.0 (3MB). We just wonder why this drastic file size difference from older to newer versions. Sometime, it is taking more than 5 minutes to create the PDF file on CS 7.0.The exported PDF from CS 7.0 and open in Adobe Illustrator for edit text properties is automatically changing the TEXT format into DARFT format. Please refer attachment for more details.
I have CAD ( step/PVZ) models with parts which are composed of Facetset/Facet entities.I want to export the geometry as well as material data for these parts.I have got the API's to get the geometry data for them.I did not find the API to get the material/appearance properties of these kind of objects.There is one API ProSurfaceappearancepropsGet to get the appearance properties of the surface entities.But I did not get the similar API for the Facetset/Facet entities.Can anyone help me for this?
i am now trying to initial a function to get the dimension of pattern feature member, i can get the pattern member dimension of dimension pattern, direction pattern, but not point pattern.i'm not sure what the problem is ,maybe it is the handle that i'm using is wrong.for now i'm using:status = ProPatternHeaderGet(&pattern,&pFeature); it can successfully get the pattern member dimension for dimension pattern and direction pattern, but not point pattern.as the snapshot below, the dimension of pattern member is stored in sketch, now i don;t know how to get the sketch feature here.i tried ProPatternLeaderGet() function, it doesn't work.what is the difference between ProPatternHeader and ProPatternLeader, what function should i use to get the handle of the sketch for point pattern.many thanks for you all.
Hello. I posted this question on Eng-Tips and thought I'd come here. I just started using CREO (started at 7 we just upgraded to 10) and there is something that's been bugging me about how CREO manages Ordinate Dims. So, I've used NX and SolidWorks in the past. In both those programs I could start an ordinate chain by selection 0-0 and place Dim chains. In both those programs - if later on you need to change the 0-0 (origin) you would edit one or both 0-0 Dims - select a new reference and all of the dims updated. When I first started using CREO 7 I thought this would be a thing. Apparently, it was not. My colleagues even warned me if your 0-0 loses its reference (due to surfaces/design changing) you had to trick the origin into finding itself again. I performed a search - and I believe this has been going on within CREO since maybe 3.0. That seems crazy. So, leapfrogging to CREO 10 I was like - this definitely got fixed right? Well, I sense that this still isn't an optio
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.