Recently active
Hello everybody, I am creating a design of wiring harness in schematics and I would like to do a flat harness drawing in creo cabling afterwards. Is there a way how to display in flat drawing version of XML file which was used for creation of 3D harness? Eg. if I export file from schematics named XMLdesign012023.xml and then import it into creo cabeling. Can I automatically in creo flat harness drawing display something which says Design based on: XMLdesign012023.xml I can write it manually, but we are more people working on the harnesses so there is a change that someone will forget and than we are not able to know what was the source and if the design from schematics is reflected in drawing or not I normally use repeat region feature to view cabling parameters at drawing, could it be done in similar way? Or maybe via parameters? Thanks everyone for answers
Hello, I've been working with it for a long time and now I'm annoyed by creating measures for each ground spring. This is our technique of creating boundary conditions using spring to ground and we need to create a set of measures for each one of them( X Y Z reactions and amplitude of force ). Is there any possibility to automatically create any set of measures for springs? I know that all contact interfaces does this but not springs.Thanks in advance.
Please see the image. It is a side view of a part, with the sketch of the proposed bend. I need to bend just the end (above the sketch) so it follows the sketch (which I can do easily with a spinal bend), BUT I need to control the orientation so things that are vertical (as in this view) remain vertical when complete.Geometry with the sketch to form. Normally, with a Spinal Bend, the geometry follows the curve and makes the geometry "wrap" with the curve, meaning things that started vertical will be perpendicular to the spine (sketch shown above). I want the vertical things to stay vertical, but the shape to "droop" to follow the curve. I don't remember for sure, but it seems like there used to be projection controls with a spinal bend to do this. (Not AREA controls.) I feel like I've done it in the past. This part geometry is complex enough that I can't really create it in the correct shape. The part is quite deep (into the screen from the
Hi all,I am trying to open a .sldprt and everytime I open it, my creo just freezes.I have tried multiple different .sldprt's and all of them cause this issue.Is there anything I can do to get these to open?I never had this issue in Creo4.0 I am currently using Creo8.0
Hello,I am trying to recreate this model from solidworks model mania 2005. (https://blogs.solidworks.com/tech/wp-content/uploads/sites/4/Model-Mania-2005-Phase-1.jpg)I am having some trouble recreating the lower part that is the blend from the oval section to the circular section without having lines.As can be seen in the drawing there seems to be no indication of where the circle section should be divided to create the blend (and no such lines appear in the solidwork model), I merely drew a centerline connecting the separation lines for the oval section and used that to divided my circle. Is there an error in my approach or is this a case in which solidworks and creo functionality differs? Here is a link to their solution video (timestamped) https://www.youtube.com/watch?v=OKgWcBTxD5I&t=8m49s I am using creo parametric 9.0 student edition.
I have successfully created new Simple representation. But not able to add part models to it. My codes are belowDim newsimRep As IpfcSimpRepDim newsimRepInstrs As IpfcCreateNewSimpRepInstructionsDim newrepname as string="Fix"Dim solid As IpfcSolidDim simRepItem As IpfcSimpRepItem newsimRepInstrs= (New CCpfcCreateNewSimpRepInstructions).Create(newrepname) newsimRep = solid.CreateSimpRep(newsimRepInstrs) '-------Now I want to add items to this simple representationNot able to add items to simRepItemPlease guide with codesThanksGopinath
Hi Team, I want to keep custom settings in Creo in such a way that whenever I create a hole in the model.The Hole location and it's depth dimensioning should have 2 decimal places by default in the drawing. Also, I want to set The angle of the hole as basic by default.Is there any possibility without affecting other things' tolerance in 2D Drawing? The rest of the dimensioning should be per Creo default.I would appreciate any solution for the above request. Thanks so much in Advance.
In Creo 7 or higher is the following possible using BMX module? I have a design problem where I need to make changes to the master model to modify geometry, but the goal definition needs to be defined in the derivative part as the feasibility goal is intrinsic to the derivative part geometry. If I have a master model and a derivative part dependent on the master can a feasibility study in the derivative part use parametric items (parameters, dimensions) from the master part as variables when setting up the feasibility study? If not, can feasibility studies between part models be linked to run automatically or would manual iteration be required?
Hi Team,I want to keep custom settings in Creo in such a way that whenever I create a hole in the model. The Hole location and it's depth dimensioning should have 2 decimal places by default in the drawing.Also, I want to set The angle of the hole as basic by default. Is there any possibility without affecting other things' tolerance in 2D Drawing? The rest of the dimensioning should be per Creo default.I would appreciate any solution for the above request. Thanks so much in Advance.
When editing a family table cell, the cursor goes AWOL (missing) and I have remember how many left or right arrows to edit text in a cell. I am using Creo 9.0.4.0. Has anyone else experienced this? Any thoughts to a solution. Brand new systems with the specs called out for Creo 9.0.4.0.
User is trying to allocate more RAM for his Creo Simulations by updating config.pro file, but it doesn't seem to be reflecting in run summary.sim_solver_memory_allocation
I am trying to replicate this drawing of a solidworks model from their model mania. (https://blogs.solidworks.com/tech/wp-content/uploads/sites/4/Model-Mania-2004-Phase-1.jpg)I am having trouble recreating section B-B in my own drawing, the closest I have come to this is below.I have tried using zones and dabbled in full aligned/unfold cross sections but I am unable to figure how to do it. Help would be greatly appreciated. I am using creo parametric 9.0 student version.
Just wondering what the heck is the difference between Sketch and Skeleton features?For example, when I do Copy Geometry, I know I can copy Sketch elements from a regular Prt file, so I'm wondering why I should buy AAX and get the Skeleton feature.
Is it possible added parameter to config.pro, which value will be switch on in drawing (exactly in format.frm)? For instance, in company without PDM users need change standard iso to others (on drawing).They using main config.pro and it couldbe good soluion that admin will change value of parameter in config.pro and finaly in all users will be changed it automaticaly.Maybe other possibility not exactly in config.pro?
Creo view assy download issue
Regarding icons in CreoThis is the icon from the Creo AAX demo video.What is this icon and how do I create it???
I am using Creo Parametric Release 7.0 and Datecode7.0.3.0I have a 2d repeat region to report fam.inst.param.name as column headings and fam.inst.param.value as rows. Is it possible to write a relation or something to show a column heading as a specific text rather than fam.inst.param.name. For example, if the fam.inst.param.name begins with 058914, can I report BACKPLATE as the column heading instead of 0589140010? I want to leave some column headings as reporting fam.inst.param.name.
Hello i need to create a knot but is not working out well. The spinal or toroidal bend is not suited for this. I am using Creo 7.0. Any tips are much appreciated thanks
Using Creo 9.0.5.0. While adding a leader to an orphaned note, the leader automatically want to snap to either perpendicular to the surface to which it is being attached or to a line that it is crossing. While hoovering close to the edge/object the leader is on an angle (it does have a little perpendicular symbol in a circle) but as soon as the mouse is clicked on the edge it snaps to perpendicular. Actually as soon as I click on add a leader, this "helpful" little feature shows up. How do I turn this "helpful" feature off? {Thanks for the help 🙂 }
What I want to display: 0.1 [.004] I have gtol_secondary_value_precision set to round, dual_dimensioning set to metric[imperial], and gtols set to ANSI standards. The problem is that no matter what I try, the secondary unit won't round up. If it is set to 0.100 it shows [0.0039] but when I put 0.10 it shows [0.003] instead of rounding up.
PTC says they don't have a csv file for drawing (dtl) options. How do all of you sort through what the new ones are? I created an idea for this: https://community.ptc.com/t5/Creo-Parametric-Ideas/Provide-a-reference-document-as-a-csv-for-all-of-the-drawing/idi-p/893254#M19526
When working a 3d.prt generated in MANUFACTURING-MOLD CAVITY (CREO V 9.0) for mill it, frequently turns "RED" the file pointing to: Extract id 1 REGENERATION FAILED.Q: Why this happen and how to avoid it?Thanks in advance.ELI
Dear PTC community,Please, advise how I can change the fps speed for the already-done sequence. My current sequence is too slow and I want it to play 2xfaster.I see that there is an option to play it faster within the Creo Illustrate:I know that I can manually shrink the length of each step or if necessary shrink each effect duration: it takes too long for 10 sequences.(20 steps each).But I don't know how to set 2x speed for fps for publishing pvz and c3di Vuforia Studio. Please advise any solution,
After clicking on "Launch Creo Parametric Trial" it downloads what i assume is a download client a gray pop up shows up (Powered by Claudpaging), and after a few seconds Launcher shows error message that reads "The server cannot be reached while authenticating the session. Please try again or contact costumer support." after that launcher delets itself from my pc. It says that its trial version 10.0.0.I tried it a few times and its always the same.
I am trying to split bodies but every tutorial and support page on ptc refers to a "Body" ribbon up at the top where I have highlighted in red. What am I doing wrong? I have never had such an issue trying to learn a new feature. I have been able to split a part in sheet metal with no issue but now that i have a regular part it feels like I am missing a function. I just want to know where the Split Body Command is. I have used the search command with no success.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.