Recently active
Hello, i am looking for this programm Pro/ENGINEER Release 2001 Datecode 2005030 2001.0 For Windows 10-11 and 64bit. Can somebody help me how i get this software? Thank you! King regards
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? CREO Parametric 9.0.6.02. What is the problem? when changing model tree width or adding columsn this is done for ALL active models. this is not helpful as I don't want these model tree changes to be reflected in all model, only in the active model.3. Are you using a workaround? If yes, please describe it. no, not possible, unless keep changing model tree settings4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.e.g. in part models you may sometime need to see Feature # and Feature ID, but not for all models. sometime you may want to see windchill information for all componants in a specific assembly, but not in all assemblies in session. in CREO 9 this differentiation is not possible anymore (in CREO 4 this was)5.
I'm looking for some documentation on how to install Creo 8 with Corretto (JRE 11 ). I've searched the PTC website but I'm not finding it. I'm looking for installaing a new setup, as well as converting an existing setup to not use Java, and use Corretto ( JRE 11 ). If you can point me to a document I'll be happy to read and try it out. Anyone able to help point me in the right direction. Any help would be greatly appreciated. Thanks.
I don't even know what it is called to try and search for.But I want to be able to show what the orientation is set to when in a combination state.
Is it possible to modify the size and location of the the parts list table when saving as a pdf? What is common practice around using Illustrate figures for 2D parts manual documentation with parts lists? I tried editing the XML but with the little guidance out there, I couldn't even replace the ptc logo with my own. A little frustrating this functionality isnt easier to use or doesn't exist. Maybe Creo Illustrate is not intended to make 2D manuals? I'm just a Cad Admin and this software was purchased before I was hired so I dont really know anything about it
Hi everyone,I was generating the DWG file from a drawing. Some views have the state "Shading With Edges" in the "View Display" properties. This is due to production porpuses and I cannot modifiy their representation.During the saving operation, Creo displays a warning in the console, I attach the image below.The resulting DWG file is incomplete, the biggest shaded views are missing on the drawing.I tried changing some export settings, but nothing helped. Even exporting in DXF format resulted in an incomplete drawing, while PDF is ok.Does anyone know how to solve this problem?Thanks in advance.
Hello, Is it possible to use Creo Generative Extension for purpose of generating multiple design variants of same parametric model with dimension variations?
The config.sup is for settings that users (or any other config.pro files) are not allowed to change in Creo and seems like a perfect place for corporate wide mapkeys to create standard processes/toolsets. In Creo 3 M060 as shown in the attached video, the config.sup will allow MANY mapkeys to exist in a Creo session but not let ANY of the mapkeys from the other config.pro files (e.g. a users config.pro) load into Creo. It would be way more flexible if the other config.pro mapkeys would load into session as well. Where two mapkeys have the same name, always use the config.sup mapkey. General user config.pro files often tend to get tons old settings and mapkeys built up over time if edited from Creo so superseding user mapkeys where a naming conflict exists help admins keep users using the latest and greatest processes/mapkeys as things inevitably change.Several good ideas were shared in Re: Corporate Mapkeys - Superseding User Mapkeys about how to accomplish this but currently require a
We successfully installed Creo 10.0.4.0 on Azure NC4as_T4_v3, and Ansys simulation is now working. We found new issues: In the CSL fluid study, clicking on the Streamline baton causes Creo to crash. Graphical errors in basic Ansys simulation results. In the advanced results, it works properly, with no graphics issues.
hello everybody,can you tell me why if I open a file it retrieves thousand of other files in Workspace?it appears no external references to methanks
Hello everyone:I have the following issue with my bearing: In the sectional views, the balls always seem to be fully displayed, and I just can't get rid of it (as in the attached file).I imported and installed the bearing from the SKF catalog as an STP file like all the other bearings and they word fine. Please help!
I have a sketch of a quadrilateral between 2 parts in my assembly and the dimensions of this quadrilateral are derived from the spacing between the parts (by putting constraint "Point on Entity"). Now, I want to establish relations for placement of another part with the dimensions of this quadrilateral. However, when I enter into the relations dialogue box and click on the sketch, the dimensions corresponding to the lengths of the quadrilateral do not show up. I understand that this is happening because it was not a defined length, but rather a derived length. But is there a way to access such dimensions in the relations dialogue box?
Hi everyone,since I need to get screws based on threaded holes, is there any chance to set screw diameter by thread surface diameter or to set DG dimension on drilled hole surface?
When dimensioning a threaded hole Creo is adding {0:@D} to the front of the dimension. I have tried to delete this several times without results, creating a new dimension for the same hole does not help the problemDoes anyone know why this is appearing and how to stop it from automatically adding
Folks,I am using CREO 7 and I want to understand how CREO sums part weights to arrive at the total assembly weight. Is there code or relation that can be accessed to learn how this is done and where can I find that? Thank you.
I'm trying to create a custom view orientation. No matter what I do, I can only rotate the view orientation about the Z- and Y-axis, but not about the X-axis. When I change the numerical value either in the X- or in the Z-angle input box, the view orientation always rotates about the Z-axis and never about the X-axis. The attached screenshots show different angle values entered in the X- and/or Z-angle input box. It can be seen that the angle always changes about the Z-axis and never about the X-axis. 1. Start: X-angle and Z-angle are zero 2. Changed the Z-angle -> view rotates about Z-axis ✅ 3. Changed the X-angle -> view rotates about Z-axis ❌ 4. Changed both Z-angle and X-angle -> view does not rotate at all, Z and X cancel each other out ❌
Hello GD&T experts! I am using Creo 9.0.8.0 and I am working with the GD&T Advisor. I would like to do what is written in the help (see link below: section "Define Self-Referential Datum Features" is working with two different diameters for the sections of the shaft)The difference is that I don't want to use two diameters of different sizes, but two bearing seats of the same size (possibly with different tolerance zones, but Creo doesn't recognise this as a difference).https://support.ptc.com/help/creo/creo_pma/r9.0/usascii/?_gl=1*124c2gq*_ga*MjA2NDk4NTk0NC4xNzE0NTcyMjQ2*_ga_7NMP2MSYPM*MTcxNTYyMDk0My40LjEuMTcxNTYyMTM3NC40MC4wLjA.*_ga_CBN5QVB9VJ*MTcxNTYyMDk1Mi4yLjEuMTcxNTYyMTM3NC4wLjAuMA..#page/model-based_definition/alternate_workflows.html# ==> "Define Self-Referential Datum Features" The workflow in the help creates a cylindrical group with two different diameters, to which I can assign separate references etc., but with two identical diameter
How can i manually create markup for View Changes Analysis?
Hello, I want to set the section arrow to a view. The section view is already on the drawing.I tried this: ui::printMessage("Select view for the arrow!");pfcSelectionOptions_ptr opt = pfcSelectionOptions::Create("dwg_view");opt->SetMaxNumSels(1);viewArrow=session->Select(opt)->get(0)->GetSelView2D(); ui::printMessage("Select section view!");pfcSelectionOptions_ptr opt2 = pfcSelectionOptions::Create("dwg_view");pfcSelections_ptr sel = session->Select(opt2);pfcView2D_ptr viewSection = sel->get(0)->GetSelView2D(); wfcSequenceofSection2DInstructions_ptr instrNew=wfcWView2D::cast(viewSection)->GetSection2DInstructions();instrNew->get(0)->SetArrowDisplayView(viewArrow);pfcModel2D::cast(mdl)->Regenerate(); It doesn't work. Thanks for your help
Hi, I'm creating a mould of a lego minifigure for a school project. I created a silhouette curve to define the split line on the model but then when I tried to create a skirt surface it came up with a lot of errors because I don't think the silhouette curve has complete loops. Is there any simple way of fixing this? Maybe using a different operation to achieve the same result?
I am using Creo Parametric Release 4.0 and DatecodeM080When importing .stp files (created in Creo 7.0 or later) provided by others, a "fatal error encountered..." window appears and the software crashes and closes.Here are the errors that I facedfatal error encountered...
I have created gyroid structures in creo and want to export it as a step or iges file to work in ANSYS, but if I try to do so, except for the gyroid every other part is getting exported. Is there a solution to this problem. Also I can export it as a STL file which turns out to be heavy, which is not feasible to work with.
I didn't find any interface related to the Create_balloons function in my API wizard. I use Creo Parametric 4.0 version, I am trying to use VBAPI to create balloons by view automatically . Is there any interface can help me with that? Or other ways to take me there.
Hi there, I installed the student version of Creo 8.0.4.0, I know that I do not have a cutting-edge computer to run some of the extensions of creo such as creo simulate live, creo render studio and others... that is why I just installed CREO PARAMETRIC. However, when the installation was done, I got the message INSTALLED WITH ERRORS, I opened the message to see what the error was and it showed: your computer doesnt support creo simulation liv ( I said it doesnt matter because I did not installed that extension) as I said before I just installed creo parametric. Therefore:1. I opened Creo to start getting familiar with the software, I clicked on CREATE NEW PART, then I scrolled up and down on the drop-down menu to select a TEMPLATE (I think it is for units selection) BUT I could not be able to select the template I wanted, it automatically asked me to select a template again, I TRIED to select a different one but nothing, then I DECIDED to click on and selected EMPTY and it worked,
Hello all, I'm looking for a way to set a default option for number of decimals shown in a drawing dimension. The obvious answer here is to change the config option default_dec_places, which will achieve my goal. But the problem is, that also changes the dimension decimal places in a .prt sketch as well. I would like to have these two dimensions decimal places default to different numbers. See below. SKETCHER - .XXXXDRAWING - .XX Is this possible? Thanks,Kevin
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.