Recently active
Description:Pro/report drawing table parameter for active_rep "&asm.mbr.active_rep“: possibility to have the active simplify representation shown in a Pro/report drawing table cell.
currently if a shaded views is section in annotation, the clipped faces appear in some system default color. This should actually be able to be set to the part color. The whole purpose of creating shaded views in annotation is for clarity. Normal shaded views, the parts are shown in the actual part color. however; when a cutaway or seciton is added, the clipped faces change to a default color making the shaded view pretty useless.
This would be very useful to machine engraving/pocket on surface with tool normal to it and with a SPIRAL motion to have a good finished surface.
Description: If the initial (origin) function is hidden in fill pattern, the feature edition is not possible. The same for editing the definition:The message is : Cannot redefine pattern member while its pattern leader has been ommitted.
Allow us the ability to complete control what we have and what we don't. Currently, we do not have complete control
The orient View option includes two axis options to orient vertical and horizontal. The option to view Normal to axis needs added. Reason: Verify hole alignment visually when working with brackets mounted to surfaces is one example.The image below is from Wf5. I have confirmed with PTC technical support that the function is not available in Creo Parametric 2.0 using case 10799554.
Now in Creo Parametric 2.0, when I select an edge and open popup menu I I find only round feature, why I don't find chamfer??
Parties accomplished in concrete must be put in an obvious place by one specific hatching. This type of hatching (concrete ) is envisaged by norm ISO. It is necessary to show different concrete types, according to their characteristics. is there a resolution to show this type of hatching ? see attached screenshot current method is to use autocad to finish specified hatching - but any tool inside Proe will be ok. regards
It is not possible to resize a symbol without changing text height. Some symbols including lot of options (Welding symbols) are not shaped to cover all options and seems very large when all options are not selected Resizing should be possible on lines without impact on Text style How to change the ladder of a symbol without changing the height of text of very symbol? Example The same symbol with 2 different stocks of ladder The value of the scale carries a full dilation of the symbol. the height of the text is automatically changed accordingly. requirement is to change the scale of a symbol without changing the heights of text.
Starting I think in WF4 the combined state was introduced. If you aren't using combined states though when you insert a new assembly drawing view the software prompts you to select a combined state anyways. It would be nice to either change this to be in the view properties or somewhere else so it doesn't always automatically pop up when inserting a new view. Alternatively a config.pro option to revert back to the pre-WF4 functionailty without the pop-up would be nice.
Would like to be able to work with 'Handed' parts as shared parts. Currently only symmetrical parts can be mirrored and shared. I would like so 'reflective' functianality between parts that allows for non-symmetrical parts to be shared also.
Ability to vary an MDO force (or coefficients of friction, etc.) and see how it influences results in order to avoid launching several analyses.
As in Pro/Mechanica, to have the option of converting the units.
Very frustrating using 3D dims on a model then have to fight your way through loads of large information labels for any machining module features.The term labels is too general (ie covers too many types), operator needs the option of only showing what he wants, 3D dims or machining featurelabels etc.Would also be good to be able to control which assy/parts have their labels shown rather than the whole model.
Have a resolve mode to tell which functions (cams, motors, etc.) are causing problems in analysis.
Cams have only 500 points and sometimes they don't follow the geometry of the part (with a long edges and short radius).Geometry in grayCam in blue
It is possible to delete cams functions but it would be interesting to just suppress them. We could resume them later, as a Creo function.
It is not easy to create the cams in the right order, so be able to reorganize them would be considerable help. In addition, to be able to copy and paste cams would save time. (Paste Special > Advanced reference configuration) Additionally, to have the option to repeat cams (for gears) by reference would be appreciated.
Have the choice to select cam edges either individually, by chain or by loop.
Take account of the gap between teeth with gears-pair connections.
It would be easier to be able to select the outline of the gear (by chain) and that multi-contacts (2 teeth which touch) do not cause problems.Having to create cams for each pair of gear teeth is inconceivable for a complete gear-train.
We often use large deformations analysis but it isn't possible to use it with midsurface.
Ability to Begin the Analysis’s Name by a Number.
Estimation of the total calculation time.
This function cannot be used with large deformation analysis.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.