Recently active
Hello, When I publish to pdf file after the translation package, I get the following error message. WARNING: [A50920] DITA topic "x-wc://file=0000015385.xml" could not be found for "contentref" at line 6 in "Main Map".I can also just publish the title. I can't publish contentrefI need to help about this case.Thank you
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I work in collaboration with a design for manufacturing group. My task is to list some rules established in order to avoid some manufacturing problem when we design particularly in sheet metal. 2. What version of Creo Parametric are you currently running?I am currently running creo parametric 7.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.My goal was to automate sheet metal rules in creo parametric in order to have some errors or warnings displayed automatically when we don't respect rules established. I have already searched some sheet metal rules in model properties in the sheet metal module but the verification is manual through the window "model information" where we have design rule-violation check. I have also found the tool "check rule" in files>prepare after previousl
We only have 1 license for Simulation Live. It only gets used sporadically among various users. Most people need access to it. When creo starts the license is not pulled but if anyone clicks on the Live Simulation tab, usually accidently, the license gets pulled and prevents others from being able to use it. I dont necessarily want to remove the tab from everyone's ribbon and have them load it manually when needed but that seems like my only option to prevent the license to be inadvertently used. Are there any other options out there? Seems like a pretty annoying flaw in the license design.
Hi,I have a model that I am working on and need to replace an instance with a different instance of the same part. When I go to my model tree and navigate to the instance, right click, and I don't see the "replace" option here. First time I've seen this issue, any tips? Some more information - Using Creo 8 with Windchill 12 Thanks
hello everyone, I am encountering a problem in Creo Parametric, during the creation of a sketch or an extrude. When I want to modify a distance, I double-click on the value, and a fraction of a second later it reverts to the original value. If you have already encountered this problem, I would appreciate your help. Thank you in advance.
Version Creo 9 Good Morning. I received this as a step file which opens as a assembly. I am making one of the horizontal pieces about 17" longer. Because it is an assembly with no constraints already built in, I have to move and constrain all pieces next to the 17" lengthened pipe. Is there a way to just save this as a multibody part and make the change so that everything moves together?I have tried file and save as to see if I could just output it as a part but that doesn't seem like an option. I am used to Solidworks where everything is easier. Thanks in advance
I am designing a piece and the shaft of it needs a 1.5 degree angle on in while keeping one side straight and I've done what I know but I was wondering if there was a different way I could actually use the angle instead of what I've got in the pictures. Or if there's any easier way to do this I would appreciate any help I can get thanks. I am on Creo Version 9.0.1.0
Are there any experts in the CREO NC processing programming function???No matter how I look at it, I don't know the difference between WORKPIECE and MILL VOLUME, can anyone tell me???
I am using Creo Parametric Release 9.0 and Datecode9.0.5.0When I start a mold analysis (mold flow), Creo merges my default template solid part with the part I'm analyzing. My default template has solid geometry in it so I get a merge between the part I want to analyze and my default template part. Even if I delete the template part, the analysis still includes it. It is using the file set by the config.pro option: template_solidpart. Creo 6 did not exhibit this behavior.Here are the errors that I facedThis shows up in the message window when I click on the "analysis" optionUsing the template default \\prod\root\Other_Drives\CAD-Ilox\Intralox_Molds\standard_components\startup_models\startup_mold_part.PRT as the template.
Hello, I was wondering if anyone has tried using Creo Illustrate with Creo Parametric models but using Siemens Teamcenter. I'm trying to find out if Illustrate can connect to Teamcenter, as that is a requirement for a new team I am working on if they want to consider using Illustrate. This team is on Creo 10.0.3.0 Thanks!
I am using WF5/Creo. The number of files/drawings to be opened at one time is 15. Is there a reason that you can't have more than this?Thanks,Also, when editing a weld symbol - it treats the window as a 16th window. I recieved an error message that I had to many windows open. Try closing a few. I had 15 windows of files open and when I closed one, I was able to edit the weld symbol. Make the weld symbol editing box not the same type of feature/structure so that you if you have the drawing open currently, you would not get an error and the window would open normally for editing.April 11, 2013: Beside the window for welding, I just found that if I wanted to add a symbol, that window counts for one of you 15 windows too. I wasn't paying attention to the text line and clicked on the symbol icon, and it wasn't doing anything but silently screaming at me that I have to many windows already open.Sept 11, 2013: Wanting to add a symbol with 15 windows open bit me again - couldn't figure out why
Please include detailed documentation such as screenshots, images or video.Related to Article - CS257786 this behaviour is not part of the Creo View Adapter1. What product and version are you running?Creo View Adapter 10.12. What is the problem?We need the option to publish assemblies with supressed components and the option to not publish assemblies with missing components.3. Are you using a workaround? If yes, please describe it.Not really - we are using for now a 3rd party solution where all this works.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Missing components result in wrong drawings and this can result in faulty production5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)The entire production process
I was wondering if anyone here has a powershell script that I can use to deploy CREO 9 through Configuration Manager. I can create a custom script to install but I would like to know what is needed to add the license and everything fully automated, perhaps an XML file that instructs the software.
Creo Student License Hi Everyone, I have student license(Creo Lab Pack) can I borrow this license like Floating license?, anyone can help me
Hello everyone,there is one function, in relation, wich returns a parameter representing the number of components in an assembly. It would be the equivalent of the &rpt.qty parameter present in the tablereport or the %$quantity parameter present in the BOM configuration file.Many thanks for your time, greetings Luca.
1. Are you using a workaround?Unavailable2. What is the use case for your organization?Multiple table cells can be selected and copied to different table cells.3. What impact does this problem currently have on your organization?The more contents you want to copy in a table and the more paste destinations you have, the more man hours it takes. Since it is possible to copy paste more than 3 pieces of the same content into more than 20 DRWs in a single operation, copy pasting one by one takes a lot of man hours. The corresponding effort for each subassembly is 0.5 hours more than previously used CAD. Since there are approximately 265 subassembly drawings for a product and the number of drawing sheets needs to be matched, 0.5h x 2 (average number of sheets in the subassembly) x 265 drawings =265h increase.Describe the Problem The contents of a single table cell can be copy pasted, but it cannot be copy pasted when multiple selections are made.The contents of a table are often used in colu
1. Are you using a workaround?no, I don't use any workarounds2. What is the use case for your organization?With our licenses we cannot use the "copy geometry" commands so we sometimes create external references and dependencies. Creo Parametric does not allow you to duplicate an assembly if dependencies are defined within it, so in this case we use the "Reference viewer" command only to view the dependencies of the children.3. What impact does this problem currently have on your organization?a few minutes, but repeating the command would be very appreciableDescribe the ProblemCurrently when I run the "Reference viewer" command, the program starts doing all its calculations and then displays all the references and dependencies, and if the assembly is complicated it takes a long time.What I suggest is to create a further command that gives the user the possibility to preset what he needs and then start the calculation.For example: I call this new command, the program opens the "Reference
We are migrating to creo 8 and noticed when the Model tree is separated in a different window, the left window is not showing the layer tree by default as it shows the FOLDER BROWSER instead (IMO, useless at this point). How do i get Creo to show the Layer tree everytime i open new windows? I can not seem to find the answer to my Q in the help or support pages. Creo 5 shows the Layer display on the left and Model tree floating on the right. each time I open a new window. Since I work in the routed systems stuff, all I ever do is switch between parts and assemblies all day long. I dont care for having to turn the Layer tree on every time (2 extra clicks everytime I open a window)
Hi there, I used Creo Parametric Version 9.0.3.0. I don't have stl option when I click "save as". Dose anyone have this same issue? Thank you in advance for your help!
I recently get into the world of CAM, and in my factory we acquired a 4 axis milling machine an double column machine, But i'm not really good designing post processor and i'm wondering if you have something similar with 4 axis and vertical Z Axis, Thank you.
I just went through the nightmare of discovering that I was calling for 2 thousand second dwells on countersink cycles. I thought the machine had quit, but that wasn't it. My controller expects P periods in seconds not milliseconds. I fussed my around G_post, found and fixed the variable and checked that it now works. My question is what to do with Creo residual installations from 7 to 10, each one containing gpost option files for my machines, some of which have been modified over the years.When I upgraded to 10, I copied the gpost files from Creo 9 into the same folder that they would have been in 10 and it looks very much like that is what Creo Manufacturing has been reading when I call for a work-center I have on file. I fixed the uncx01.p33 (the one in the Creo10 system files) which is the option file for my mill and I now get the 2 second dwells I was looking for I suppose I can move all of the older trees to another drive and Creo won't be able
using pfcls;using System;using System.Collections.Generic;using System.Diagnostics;using System.Linq;using System.Text;using System.Threading.Tasks; namespace testOpenPrt{internal class Program{static void Main(string[] args){Console.Write("请用;分隔序号数字,输入想要生成DXF的图纸\n所有打开模型将会关闭!!!\n");string inputselest = Console.ReadLine();IpfcBaseSession currentSeesion;IpfcWindow Iwindow;Connecting MYconnect = new Connecting();IpfcAsyncConnection asyncConnection = MYconnect.asyncConnection;currentSeesion = (IpfcBaseSession)asyncConnection.Session;CCpfcModelDescriptor descModel = new CCpfcModelDescriptor();IpfcModelDescriptor descModelC;descModelC = descModel.CreateFromFileName(inputselest + ".prt");Iwindow = currentSeesion.OpenFile(descModelC);Iwindow.Activate(); }}public class CreoVBAPIProcess{public static void EndProcess(){Process[] a = Process.GetProcessesByName("pfclscom");if (a.Length == 0){ return;}a[0].Kill();} } class Connecting{public IpfcAsyncConnection asyncConnection = null;public Connectin
We regularly download vendor STEP and IGES files for use in our designs. Some of these downloads are assemblies that we bring into Creo as a single part. The vendor lists the weight and the CG location of the assembly on their spec sheet. We know how to make the imported part 'weigh' what it needs to weigh based on the part volume. How do we go about defining the CG of the CAD model so it represents the reality of the vendor model? Creo 8.0.0.0 Thanks
1. Are you using a workaround?Yes - manual text entry / update (error prone!)2. What is the use case for your organization?Creation of "smart" documentation that updates automatically and elimination of out-of-date notes. 3. What impact does this problem currently have on your organization?Unknown; anecdotally, probably quite significant. Describe the Problem The software provides in the UI the capability to search the model database and return the list of results. However, this information is not available to be used for programmatically documenting or driving the design intent. For example, a user recently asked for a way to report how many parts are contained in an assembly (ref. thread - PARAMETER FOR NUMBER OF COMPONENTS PRESENT IN AN ASSEMBLY) The information can be obtained using the search tool. However, only a static annotation note can be manually generated with this. The proposal is a conceptual idea of a general feature that stores the search results in an accessible
1. Are you using a workaround?Currently, there is no direct PTC Toolkit API to get the tessellation of TAPE/MARKER Feature attached in Cable Harness2. What is the use case for your organization?We are using application to convert Creo data file to JT file format . Due to unavailability of any toolkit API to fetch the TAPE/MARKER tessellation , the conversion is not completed properly.3. What impact does this problem currently have on your organization?Not able to get the complete feature of Cable harness in JT File.Describe the ProblemProCableTessellationGet() does not give the tessellation for the TAPE/MARKER contain in the cable
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.