Recently active
When we have a part model like a hollow shaft with variants in the inner diameter, we can use family table to create instance with the inner diameter specifications, when we require having detail drawing for each instance, we have to create new drawings for each instance,or we can save a copy and replace the model, but if there are going to be 50-70 variants as instances, it will be a time-consuming process to create drawings. Thus we need to have an option which automatically creates the drawings for the instances with reference to the drawing for the Generic part. Something like "Create the drawing for Instances also" selection option would be very useful for fast processing.
Introducing the possibility to create and activate sections inside the Mechanism environment. Same thing with the change of Style view. Bye
Simplified reps for flat states are a great way to avoid user input errors in family tables, however it doe spresent another end user problem. Typically when making a drawing for a sheet metal part you would have the form and flat displayed for dimensioning purposes as well a sheet to send the dxf in its flat state. The problem I see is that now you have to go and replace the rep on each sheet. this causes another end user step that can lead to remake parts. Before using a rep, you could replace the flat state in the drawing and it would update all versions of the flat in that drawing. Essentially I have replaced one possible user input for another. Is there a way to have the drawing replace all flat rep versions at the same time without having to make a multi-step maykey? Thank you. Matthew
Hello, I want ptc to create a webshop like google play and apple market for creo addons. The problem is that the toolkit is very expensive for developers and it could be better documented. The toolkit could become free available and ptc could control the quality of the addons. Furthermore trends could be seen and revenew could be taken of the sold plugins. The benefit for the developers is that they could reach the whole market of ptc, all over the world. What do you think about this idea. Thanks for upvoting. Leo
Would like to be able to create datums, "temporarily" using an external/internal reference to set the location. External references a generally frowned upon. While creating/modifying a part in an assembly, I sometimes will measure from a part datum to an assembly reference, copy the distance, create a datum referencing the part datum and pasting the dimension. Would be nice if I could select an exterenal reference while creating a datum, to get the correct position, then deselect it (would change to an offset dimension). Currently the datum "jumps" back to the Creo "random default" offset. This behaviour would also be useful with internal references when you do not want the datum tied to the reference. Examples: Create dautm plane in part by selecting Right datum plane, select a reference vertex to set position, deselect reference, and plane will stay in position with offset dimension. Create axis by selecting perpendicular reference, select
Drawing view scales are not parametric (and do not respond conveniently) to changes in model geometry. Use of the "drawing_scale_factor" parameter requires additional 'relations' in part and assembly models, when it should be handled entirely by the drawing. A 'drawing template view window', that always fits the geometry of the view model (part or assembly), regardless of its orientation, would be a practical tool. Additionally, an option to specifiy a scale denominator by which the scale is adjusted and still fits inside the view window.
Drawing templates can only be used during the creation of a new drawing. It would be very useful to be able to apply a template to a sheet within an existing drawing. For multi-sheet drawings this would save a lot of work. On an existing blank sheet, the applied drawing template would use the currently active drawing model and place the views on the sheet. This would eliminate having to create a new drawing, and then importing it into an existing drawing.
I want, with one command, to be able to mirror multiple parts without creating new parts.
Edit all features in parts with the current interface regardless of what version of ProEngineer/Wildfire/Creo it was created in, period, no exceptions.
When I move the datum tag to another place, actually there is no way to put this tag back to the standard place. Please add an option for this functionality. I refer to Case 13903191
Add a functionality to search and/or sort the values of the varied items for the inheritance feature. For big parts it’s a real challenge to find a dimension. I refere to call 13666413
Hi, I find it really difficult and time consuming sometime to find out in what units a measure is given in the creo simulate summary file. Is stress in Pa, kPa, MPa? Is strain energy in J, mJ, kJ and so on. I know this is correlated to the units of the part or assembly but for at least energy it isn't always intuitive how to calculate it. I guess in mmkgs that the energy unit is kg*mm/s^2*mm or micro Joule but I for a while thougth it was Nmm or mJ. Either way it should be really easy to program so that the unit is displayed after the value. I attach a picture to show were I would have wanted it. Best Regards Jimmie
I think it would be a big improvement if drill cycles avoided the part model by the clearance parameter (by default) when drilling patterns of holes. Currently there are no default check surfaces and if you are drilling on surfaces of various heights you risk plowing the drill through the part as it moves from one hole location to another. The current method requires a Creo operator to select all the surfaces that could be in the way of this move as check surfaces, then add a check surfaces clearance parameter. Ironically, a subsequent threadmilling sequence for the same holes that were drilled does not require the operator to specify these check surfaces and will work just fine. To make matters worse, the canned version of Module Works and NC Check do not recognize the flaw in the tool path if you do not specify check surfaces. Vericut will catch the issue if you have the time to set it up. I feel drilling is the most basic of tool
Actually, a negative stock allowance is only available for tools with ball ends. See here the PTC documentation on article CS169058. This behavior is a big limitation of functionality in milling features. Also, there are no technological reasons for this. The proposed workarounds are not feasible for complex components and in combination with a tool database. Please add this functionality in one of the next Creo releases
Driving dimension disappears when converting a view to a broken view Some dimensions are deleted when breaking a drawing view SPR closed: 2827678 Article that asks ideas: CS16739 Thanks
just like Constrain sets could it be usefull to makek chamfers & rounds flexible. in that way we could activate and de-activate feature sets using relations. Similar to the PTC_CONSTRAINT_SET parameter.
Since the 3.0 Creo Parametric version, just after a regeneration, it’s very slow to save a CAD object (even a single part) … this issue is due to of the background automatic synchronization option from user’s Workspaces. I think we should at least be able to set that option manually like in the past, disable or enable the option following the user needs.
Currently today if you run a Full Report in Interference Detection mode (Using the versus 2 inputs method) It will not state on the report what assemblies you selected. The report will only list the main assembly (top level assembly) and any two assemblies that reported an interference between each other. I'd like for the list to also show assemblies with zero quantity interferences as an option. or The general details would simply list the actual assemblies used in the versus input. See attachment for specific details.
Currently only the beginning of the NC Sequence comment is marked. This creates problems for the post processor when processing multi-line comments. Gib Text oder eine Webadresse ein oder lasse ein Dokument übersetzen. Meintest du: Es wäre schön, wenn auch das Ende des Kommentars automatisch markiert werden würde MEHR ÜBERSETZEN It would be nice if the end of the comment would be automatically marked. I refeer to call 13816273
When trying to copy and paste a drawing template view, the pasted view behaves as a drawing symbol, not as a template view. This is the same behavior when copying a sheet that has a template view. Please fix this. After pasting a template view, you should be able to double click it and edit the template settings, not get the drawing symbol menu. See article: https://www.ptc.com/en/support/article?n=CS275730 Thank you.
Could Simulate (Mechanica; msengine.exe) be made to report memory usage more accurately in the .rpt and other log files? This would enable better judgement to be made on how much RAM to allocate in SOLRAM, to optimise run-times without risking running out of memory overally. I'm running an analysis at the moment for which I've assigned 12288 MB (12 GB). In Task Manager, msengine is using 3 011 644 kB of 'memory' and 12 705 620 kB of 'commit size' (which I understand to be the amount it's told the operating system it might want to use - it doesn't seem to count towards the total 'used' in Windows). In the .prt, it's reporting Memory Usage of 17 277 371, which is significantly higher than either of the Task Manager figures (and is higher even than SOLRAM plus 'memory'!) and is therefore pretty meaningless for practical purposes. The most meaningful value to watch appears to be Memory in Task Manager, but that updates dynamically and clears as soon as the job finishes,
The screen shot below is from a round feature, but it would be nice to have this feature for sketch references where there are missing references. This way you would not have to select all of the missing ones one by one.
When in a drawing, in the lower left corner it displays the active model. When clicking on it, it expands to show all attached models. The entire model name cannot be seen, and when you grab the edge of the window to expand it, it will NOT expand. Previous versions of ProE it would expand, and it seems to have gotten lost. It would be ideal however, that when popping open that window, it automatically expands to see the full name of each model name.
At the moment you can switch a model from shadow with edges or without edges. If you work with two models, one a "normal" part and the other a imported stl file model=> both inserted into an assembly it is difficult to see something. Suggestion would be, to make the display situation differnt and dependent from the modell stored. So the stl could be shown in display without edges and "normal" model display with edges. You always have to switch view situation if you change between the two models. In Creo 2 you can define in *.asm in view manager a style where stl is shown without edges and other with edges. But this is ignored and does not work...
Actualy the only possibility to display assembly componants in different positions in a X-Section of a drawing is to create a family table.Heavy and not the best practice with Windchill.... It should be very nice to have the possibility in a simplify representation to manage this. Why not using the PTC_CONSTRAINT_SET that is today possible in family table or flexible components. Example on a hand of a watch: need a 10H and a 12H position.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.