Recently active
If there are multiple combination states how to identify which view state the PMI belongs to.If there are multiple combination states, how to identify to which view state a PMI belongs to.If there are multiple combination states, how to identify to which view state a PMI belongs to.
I added this line to my config.pro for Creo 9.0.5.0: EFX_LIBRARY_PATH X:\OR\Engineering\Systems\PTC_Settings\afx\ It gives an error message when I look at my active configuration that it is an invalid setting. I did copy the <loadpoint> Common Files/afx folder to X:\OR\Engineering\Systems\PTC_Settings I got the information from a 2018 thread, so I wonder if the settings have changed since then?
When I open a Drawing file in Creo Parametric 8, it won't let me put either tolerances or dual dimensions on the dimensions I place. Please help meeee, how can I activate those functions?
I had Windchill 12.0.2 with Creo 7.0.10 and CreoView Adapter 8.0 running where submitting a job by chedk-in would launch the adapter and publish the image. Did an upgrade to Creo 9.0.5 and CreoView Adapter 9.1 the other day and now it won't start automatically. If I start the ProEworker on the Windchill server, I can use the Worker admin tool and start the publishing and then jobs publish. If the ProEworker is not started, the worker doesn't start. In either case, the icon says Executable Not Safe, but it does start with the worker already running. I have double and triple checked the agent.ini file and the worker.exe.whitelist.prefixes setting to be sure both are spelled and capitalized exactly as Windows sees the folder names. Anyone have some idea as to what to try next?
I am trying to figure out how to pass an IDF from Creo (7.0.8.0) to my electrical coworkers who use Mentor Xpedition. I have been able to import IDF pairs I have received from them and see all the components, but I can't seem to export an IDF that shows them the components. Why is it that Creo only exports an emn from an assembly and no emp? When I send the emn over and they import it to Xpedition, they get the board outline, holes, keepouts, etc. but the components don't come in and it says "Component [ref des] found in IDF file but not in design so it was not imported" and I'm not sure what that error really means. How can I give an IDF with components placed with their outlines to my EEs?
I have a question about good practices, how to best choose the bend and corner reliefs (oblong, circle, rectangle, etc.)? When is one better than the other? Do you use any type as standard?
Hello,After installing Creo 10.0.0.0 Parametric with the UNI/Student license, the Composite feature is missing, as shown in the attached picture (It should be below "lattice". Other students using the same license and install configuration have it present. I reinstalled Creo, deleted and set up the license again. I tried configuring the ribbon (maybe the feature just isn't shown), but there is only a "composite properties" feature available with the name "composite" in it (see attached picture). Thanks
Hi, Currently when we import an emn & emp file in creo while connnected to windchill, if the component model exists in the windchill database, the import function will place the real model rather than the place bound volume.The issue is that there may be some component cad models that are wrong within the windchill database (the origin is badly oriented, or the dimensions are wrong), and i would not like to import them, and import the place bound volume instead.Is it possible in any way to tell creo or windchill to only search for components in a specific container within windchill? (for instance the "OFFICIAL_LIBRARY" container)
When I open an old version of an assembly using Windchill, it opens with the newest version of the components. Is there a way of opening the old version of the assembly with the then-versions of the components assembled?
I'm still learning the Creo features.I would be grateful if you could help me.I was checking out the Demo for the Enhanced Pattern feature.As you can see in the picture, there is a hole in the shape.When I checked the task tree on the left, I saw that the Extrude item contains reference elements. I tried to do something like this, but it was not possible to implement it like the method in the Demo except to set the reference element first and then Extrude. How can I Extrude like in the demo?
Hi, how can I represent an assembly with 2 different configuration (sets of constraints) of subassembly?I realize the snapshot of the 2 configuration of subassembly.When I put the subassembly in 2 upper level assembly, if I recall a snapshot in one of this assembly, it put the same configuration in the other assembly: I want to mantain 2 different configurations in the 2 different assembly. Best regards, Michele Barile
Which version of Creo using the Unite extension will open 2023 Inventor files?Same question with 2024 Inventor files.
Hello,I am working on a macro in VBA api with creo 4.0 M140 to update relations in a model.I managed to have everything work out with the pfcModel.Model.Import inputing the path for a .txt file with the relations I want and the IpfcImportInstructions object created from relation import instruction. My tests were running well, and then suddenly, the method model.import throws a ToolkitGeneralError that I cannot comprehend. I've tried stripping my code to just the one action of using the import method, but now I keep getting that error, and I do not see what is going wrong.Calling another property of the Ipfc model works so it seems to be correctly defined.Any help will be greatly appreciated !Here is my test code : Sub Run_test()Dim asynconn As New pfcls.CCpfcAsyncConnectionDim conn As pfcls.IpfcAsyncConnectionDim session As pfcls.IpfcBaseSessionDim model As pfcls.IpfcModel 'SESSION INITIALISATIONSet conn = asynconn.Connect("", "", ".", 5) 'start of the creo vb
Hi, every time I open a particular assembly, I find some parts hided, in the principal representation and, every time I have to run the show all command (Ctrl+Shift+H). How can I show definitively again all the hidden parts?Best regards, Michele Barile
hi,My Java code calls a bat file which runs the Creo Distribution utility and gets notified when "nmsd.exe" (PTC service for conversion) gets created.Here is the bat file:"%CREO_BASEDIR%\ptcdbatch.bat" -nographics -process C:\temp\convert\conversion.dxc And the conversion.dxc file is as below:<DXC> <Windchill></Windchill> <Group DSQM="_LOCAL" Name="IGES 3D Export" Output="2" OutputDir="C:\temp\convert" PrimaryContent="0" TTD="C:\temp\convert\iges_3d_export.ttd.def" VaultResults="0"> <Object>C:\temp\convert\PartFile.prt.1</Object> </Group></DXC> When the bat file is run, "nmsd.exe" gets called and the part file is converted to the .igs file.But even after the conversion is complete and the log file shows "successful" conversion, the nmsd.exe doesn't get terminated and remains for sometime. Because of this my Java code couldn't understand if the conversion was over successfully.Is there a way to
Hello Team, I’ve developed a Visual Basic API based Creo application. I’ve deployed it in my machine, it is working fine. When I deployed to other end user machines, the application is not working. Below is the error, I’ve correctly set the Environmental variables and registered VB-Api in client end user machine as well. Can you please resolve this?Tried updating Dot Net Framework to V4.7.2 as well.
Can anyone tell me how to upgrade my Creo Elements Direct Modeling Express? I had been running the free version on a laptop that I replaced and when I loaded Express on the new laptop I got version 8.0. The old laptop has 6.0. I occasionally run the old laptop in my shop to check a model and can't share a model between them due to the difference in versions.
When publishing a PVZ file from Creo Parametric, the message log will state something along the lines of: Publish completed - # Errors # Warnings When # is not 0, how can I actually read what those errors and/or warnings are? I tried generating a log with the published PVZ, but the resulting log is fairly unhelpful, simply stating what was published, where it was published to, and with which recipe file.
Hello, i would like to know if there is any possibility to import stress map to Creo.We have sheetmetal parts that are made using press and we know what stresses are inside of it. But we need to simulate it and check if stresses are in allowed range. How can i import initial stredded data to creo simulate?
I should be able to edit/modify the global coordinate system (CSYS) when starting a new part. But when I open the Edit Definition dialog, the Origin and Orientation tabs are greyed out; inaccessible. I don't understand why.
I want to make a mapkey, which converts a *.stp file into a *.prt file. First step is to convert it into a *.sat file using save as. with a pauseThat saveas name should be reused when naming the the final *.part.How can I get the mapkey to read, store and give the final *.prt that name?
When you want to create or edit a round or chamfer you should see your selections in the "Sets" column, you could select a set from the "Sets" tab and edit individual model edges, this no longer seems available, you can see the sets in the "Pieces" tab and add or delete sets but not individual edges. I am using Creo 4.0 M100. In the youtube video https://youtu.be/XkNwr49vGEw?si=P_WVyUhm12UAtiR1 you can see him using the "Sets" tab, this no longer works for me, when I click on it nothing appears. you used to able to edit individual edges in a set, for instance if you had selected a large set of edges in a set and one of the edges caused the the feature to fail you could locate the one edge in the "sets" column, remove it and carry on, if you try that in the "pieces" column you only get the option to remove the entire set, which means if it is a large set you have to select all the edges again.
Hello, I'm trying to import a drawing file to the prt selected by creo using ProSelectionDrawingGet. However, the error PRO_TK_E_NOT_FOUND appears and cannot proceed. Looking at the meaning, it means no associated drawing found, but I have a drw file in the model file. I would appreciate it if you could let me know if I misunderstood this function or if it was used incorrectly. Thank you.
Hi, The Toolkit API can calculate the model's outer angle size through ProSolidOutlineCompute. This function can exclude some elements such as datum features and curves. Surfaces and hidden features cannot be excluded from ProSolidOutlineCompute() calculations. We'd like to hear your thoughts on ideas for solving these problems. 1. Exclude hidden features and surfaces of the active model, convert to STEP, and then RETRIVE to perform ProSolidOutlineCompute().: It takes a lot of time2. Use ProSolidFeatstatusGet to visit the Geomitem of features excluding surfaces and hidden features to find the minimum and maximum points of XYZ. If you have any better ideas, please help. Warm Regards, SeonHo CHA.
Hello, How to get all the current configurations (the session config) in Creo Protoolkit? I know that there is ProConfigoptionGet function, but it only retrieves the specified option name not all. Thank you! 🙂 MrSteveR_3
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.