Recently active
Hello everyone,This idea concerns the style state in combined states in 3D mode.I think it would be useful if differents display are possible in several combined states.Thanks, best regards.
Hello everyone,This idea concerns the definition of a default annotation plane by combined state.I think it would be useful to define a default annotation plane in combined state and make them changed when switching combined views.Thanks, best regards.
Hello everyone,This idea concerns the creation of different types of views in 3D annotations as drawing mode.I think it would be useful to create different types of views (general, detailed, etc ...) as drawing mode in 3D annotations and combined states.Thanks, best regards.
Need an ehancement around normalized modal stress in PTC/Simulate. By default in PTC/Simulate doing a modal analysis, displacement map is normalized in dispaclement and stress map in normalized in mass. This is not coherent. We need from PTC an enhancement around this topic. Today it is very confusing if we want to ckeck the modal stress distribution on a sub-assembly studied. What is asked : Defaut modal normalization in displacement then stress has to follows also this normalization. In option with mass normalization, stress also has to follows mass normalization.
In drawing, I would like to display the entities of threaded hole in hidden line by selecting all entities of the hole on a view that the display status is without hidden line! Todays the cosmetic thread are not display !!
When a feature fails, it is not always that the feature is at fault.It appears that often, Creo Parametric is not trying hard enough.I propose an option for the system to check if the failure remains with iterations of accuracy.It can be a dialog that request permission.It would regenerate the model at a different accuracy level and incorporate the feature.If the new feature still fails, it resets and tries the other direction.The number of iterations and step size could be part of the dialog.Accuracy is simply a place no one looks to solve an issue....and they shouldn't have to.We need more diagnostic tools to resolve failed feature during the command in progress, not after.
Please see attched Word file for detailed information.
CHECK_3D_GEO_MODIFY is a function that has no effect when inserted in a macro. I propose to have an option to make it works when inserted in a macro.The only workaround I found is to store in a temporary directory, DELETE ALL CONFIRM, and then re-load the drawing.
PTC currently offers a preference that will automatically lock objects that are added during the "add to workspace" function. I'm looking to have the preference set so that when opening a specific rep of an assembly in Creo, the objects added that are "required" come into the workspace with a lock.
Original question: Is there a way to save the "Review Total Load" in simulate as a feature and/or analysis like the measurement operations?PTC current answer: no, create new product idea.Background:I'm creating relatively complex force balance simulations with pressures and forces and its a lot of work repeating these steps multiple times:Adjust loadings (mixture of loads and pressure load), selecting "Review Total Load", selecting all loads in multiple parts, selecting an alternative coordinate system, selecting evaluation point, select compute.With these results I then adjust some loads (or the load orientation) and can do all of the above all over again (iterative loop) until I have the required balance in force.....Would be extremely nice to capture these steps in a simulation measurement feature "Review Total Load", creating also the possibility to use the results of the "Review Total Load" in a study.
Aktuell wird die Clash Analysis nach 1.000 Teilen automatisch unterbrochen. Dieser Wert sollte in den Clash Analysis Settings frei wählbar sein, ohne Begrenzung nach oben. Das Problem: Beispielsweise im STEP-Format importierte Teile sind dumm. Eine Erkennung von Gewindekollisionen ist nicht möglich. Bereits kleine Baugruppen können dann über weit mehr als 1.000 Kollisionen verfügen. Das Limit 1.000 ist viel zu gering und stammt vermutlich aus einer Zeit, als die Rechner noch langsam und der Arbeitsspeicher sehr begrenzt war. Es wäre zweckmäßig, dieses Limit aufzuheben und es dem Anwender zu überlassen, in den Settings einen individuellen Wert zu setzen.
In Annotation, create a view that is the projection of a face/inclined surface. The view should be the true size of the projected face and oriented 90 degrees from that face.
Please create a function for ProConnectorDesignationGet() (and the equivalent wfcConnector::GetDesignation() function in OTK) to get the actual Reference Designation applied to the connector.
In several versions of the Modeling you have installed, when you change a different license server, the license server name is changed correctly, but InstallShield Wizard will open again, the license server name is the last installed version's sever name.Since the display has caused an mismatch, to request an enhancement.
Hello,PTC releases Creo 4.0 soon, but there are still the old menue manager in some manufacturing cycles: four axis area turning, pocket milling, surface milling ... Why? The old menue manager is too complicated to use. RegardsErik Jose Coronado
We do a lot of radial pulls on molded parts and we end up making multiple curves to control the section. It would be nice to be able to just make the spine curve and then assign a section and have the ability to add draft as it sweeps along the spine.
This would eliminate finding the input box and selecting it.
I hope it's possible to define Objects as a folder including all target files for Creo Distributed Batch, then users could include the folder in the dxc file and run the Creo Distributed Batch tool in command, so that all the part files in the folder will be loaded automatically. Usually the files in the specific folder keep changing, it's not convenient for users to load the files again when there're any updates.
Currently, in a product based definition model, if a user applies a cross section, any annotations that extend beyond the clipping plane are removed.This makes it impossible to use dimensions or notes to label items on the cut-away side of models.PTC, allow 3D annotations to remain visible regardless of cross-section.
The methods and Interfaces currently available for OLEObject would only allow users to find and query for existing OLE objects in the drawing and does not provide a way to create or insert a new one in the drawing. Currently it is not supported to create or insert a new PDF image or any OLE object in to a Creo parametric drawing through Toolkit API customization.
A very practical way to search for Solid Models (Components) inside an assemblyis to use the 'Search tool' and choose the 'SIZE' Rule.All components matching the criteria definition are found automatically .But what happens when Solid Models have 'Far / Off Body' Datums (Points, Curves, Planes)that extend beyond the real SIZE of the spatial circumference of the Solid Model?In these cases, The Search Tool finds irrelevant Models, as it looks for the TOTAL Size of a Solid Model,NOT ignoring the datums...It would be most recommended to add an option to ignore/disregard Datums while using the 'SIZE' Rule!Regards!
If I work with different models in seperate windows in Creo and I close the active window, Creo should active the window witch was active before.
For measure distance with projection, display the x,y and z projections in n 3 different colors as it was in Pro/ Wildfire 4
Hello,if someone open a part and mark a KE in the model tree, then should open directly edit definitions.Right click on the right mouse button, select the command and confirm with OK again.This is 3 mouse clicks, although you might only want to see the settings.It would therefore be very helpful if the corresponding menu opens directly.mark a KE -> Edit Definition opensmark a embed sketches of a KE -> Sketcher opensWhat do you mean? I think, this could be so much more effective!Thank you ...
Hello,Standard parts should not be cut, so it would be very effective if you could set this option as an option in the model properties.Optionally it would also be great if hatching could be deposited.Thank you...
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.