Recently active
Currently, there are some restictions when working with 3D weld symbols and displaying them in drawings:The section highlighted shows one of the restrictions that I would propose be enhanced. This is because this restriction can cause a user to inadvertantly modify the weld symbol in such a way that the symbol is not showing correctly on a drawing.For example: Here is a weld assembly with a weld feature (symbol is correct) and rounds created at the back (to help distinguish between back and front in drawings)When creating a drawing and placing the front view, the symbol is automatically placed correctly, with the fillet on the solid line):But I have the ability to move the note to the Back View using Move to View, or by deleting the note, and using Show Model Annotations to show it. In both scenarios, the result would be incorrect as the symbol does not update to show the fillet weld on the dotted line:It would be of great benefit to the user if it was possible for this note to update
There is no way to check the option "place group in currently active operation" when place a UDF by default.We only use one operation in manufacturin mode, so a config.pro option would be very helpful for us.
Since CREO 1.x Edges behind the selected surface are not shown. Unable to see the geometry behind the selected surfaceIn Creo Elements/Pro 5.0 and older releases, the edges were shown when the configuration option fasthlr is yesFor future Releases, transparency should work similar to Creo Elements/Pro 5.0.Reference: CS106063
Because of lack of functionality and/or control with Creo Simulate 3.0 software, we would like to submit a request to have a configuration setting created that would allow the user to set the number of decimal places to display for analysis results (i.e. von Mises stresses) and also the ability to set the displayed results in Scientific Notation or in Decimal format. There is an existing community support case, CS124580, that also addresses this issue and apparently the answer is that the software can't do it. There are several blogs and discussion forums out there where people are discussing the same lack of control of their analysis environment with Creo Simulate, so we are making an office request for this enhancement. We would like to know if it's possible to change the number of decimals to display for stress analysis results either through a config.pro setting or within the analysis results dialog box. For example, our engineers are not interested in knowi
Why This Function is not implemented escapes me. It is pretty annoying to have to refresh the workspace view manually after opening a model directly from windchill.[edit]: The save operation should also refresh the workspace browser view.
It would be usefull to have Appearance Gallery Manager settings in config.pro ( https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS192172 )Like Rendered SamplesYes i know, mapkey do the job
When using the function "Modify Owner" the button "Parts/Assys" must be explicitly clicked to select parts for the new owner.In almost any other function the necessary buttons are already pre-selected while using the dialog menu.So the behavior should be the same in "Modify Owner".
In the drawing mode in tables and notes the cursor is sometimes flashing in black and sometimes in white. For a dark or white background in the drawing it is sometimes very hard to see the cursor.One idea is that the cursor flashes in the complementary color of the background so it is easy to see everywhere. E.g. If I have a pink background the cursor flashes in green.Another idea would be that every user can change the color for himself in the color-settings of Creo.A work-around is to zoom in and out, so you can see the cursor again.
Copy assy and drawing for an assembly and maintain connection to the BOM and posision flags. This is not possible today, when you send the BOM to annotation you have to put out all flags again. See PTC case 13064914
With INQ_ENV 6 and INQ 301 the last created Part ID is detected. Similar it would be helpful to detect the pointer value of the last created element.
The current output of the results of AREA PROPERTY in a file and then reading and evaluating is too slow and cumbersome for many automation processes. The evaluation would have to be done differently in different localizations. A very good improvement would be an additional output specification into LTAB.
In the documentation on the ProServerMultiobjectsCheckout() function it says that the checkout (download) rules are processed based on the Windchill Workspace configuration specification. This is set in preferences either globally or by the user in Windchill.When the configuration specification is set to AS_STORED and there is only one ASSEMBLY model passed to the function one would expect the as-stored configuration of the components to be returned to the workspace the same as it does when the Windchill browser does. This is not the case. The function returns only the latest configuration.A case was filed with PTC and the resolution was that this is how the function works. It will not return an as-stored configuration. The SPR is going to change the documentation rather than change the function.This request is to have the ProServerMultiobjectsCheckout() function repaired so that it performs as described in the documentation. It should honor the configuration of the system or the check
We have a common use-case scenario:Search for a part in WindChill from within the Creo browser or search paneOpen model from WindChill into CreoStart Modifying the model and Checkout from CreoWork on it all dayCome back the next day and it is not in the Recent Files list!According to PTC, the current functionality for Recent Files does not include those opened from WindChill. This seems more like an oversight than 'not functionality'. Anyway, my only hope now is that this product idea helps convince them to accommodate for this common use-case scenario.
Hello,I'd like to have an option in Creo 2.0 M140 to open a model directly from a drawing view. There's a possibility to display a model in a drawing view, but if you select a model in a view and use RMB then you can only select Show Model Annotation or Set/Add Drawing Model.At least it would be really helpful to show a selected model in Model Tree (the same functionality as in Assembly environment). Then you can easily identify which model is used.Thank you.Tomas
When we start Moduleworks, automaticaly the plugin set chord height & angle control for generating the stl of reference model and workpiece.It could be very usefull if user could control these two values .Indeed it willprevent user receiving error message like "Could not tessellate reference model "give a solution for using the compare tool (if reference model is not tessellate, the compare tool is not working)
It is not possible to change of the direction using ProAsmcompconstraintOffsetSet(). As a workaround, setting the required value for the PRO_E_DTMPLN_CONSTR_REF_ANGLE in the element tree is needed. Plase create API to flip the direction of angle. PLease refer PTC Case C12963985 for more information. Thanks, Suresh
same as Idea Support 3MF standard (new 3D printing standard) but for Creo Parametric. Since its founding, this format has received support from more and more vendors from various industries, so it seems this is really going to be an important file format....
We need a Toolkit-option, around in the embeded browser in Creo an empty Tab produce. Today always the current Tabs is overwritten, the display of the Windchill Workspace and an other Tab is not in parallel possible. Currently this function is available only in the internal Toolkit.Currently there is only this functionality in order to produce an empty Tab in the navigation system range. see Case C13277770 folgende internal Toolkit Funktionen gibt es ( definiert internal_tk/includes/ProHelpBrowser.h) 12 /******************************************************************************/ 13 14 extern ProError ProLaunchEditHyperlinkDlg (ProPath url_path, ProPath scr_tip ); 15 /* 16 ProLaunchEditHyperlinkDlg 17 18 Purpose: 19 Dis
I would like to have a config option that let me decide if drawing formats with same name should be updated to latest iteration automatic, when drawing is opened in Creo. Today one need to switch manually. If a bigger change has happened and I do not want the drawing format to be automatic switched I can then just create a new name for the drawing formats to be used for new drawings. But sometimes when the modification is little I may want the drawing formats to get updated.
an option would be nice to save models to modelmanager and unreserve them in the database with the same command. similar like the check-in function does with the Windchill WGM
PTC : Fix it in a future release
Hi,often it's helpful to get an merged step of an assembly that doesn't contain all the single files.The workaroud with merging the files manually in creo or with Export_step/Import_as_part/Export_step is not so easy to handle.regards, Matthias
When is PTC going to fix the file importation problem? I've been using pro-e since 1998 and the #1 complaint I have is i can't get files to read in as solids. And now they have screwed up the data doctor so bad fixing models is almost impossible.So i have this project that is drawn on solidedge and the files are a freaking mess when i import them with .stp or .x_t....forget .igs that translation method is completely and totally useless with pro-e and always has been. Well it turns out that Creo can read in native solidedge files (I had to upgrade to build m110....more unpaid hours added to the project).......NOT, the files are still a complete mess and worthless.The only way i can get a decent file is to read the file into my old solidworks 2004 (and lets face facts here, solidworks blows PTC out of the water on file importation. It's sucess rate for reading in solids is 99% and that 1% gets fixed by just saying "fix the problem"....this portion of solidworks makes PTC Creo look like a
Currently there are 2 ways to make a mirror part: geometry only or geometry with features. If you use geometry only, then the mirror part changes automatically when the original part changes but patterned holes are not recognized for patterning screws,etc in the mirror part. If you use geometry with features when making the mirror part then the patterned holes are recognized for patterning screws in the mirrored part but the mirror part will not update when you change the original part. This forces you to manually maintain both the original and the mirror part to make sure that they are always true mirrors of each other. We would like to have the the mirrored part update automatically when the original part is changed but also have the ability to recognize patterns for placing screws, etc.
The Belt feature as of Creo 3.0 M090 does not calculate belt tension cause by applied torque, and therefore does not contribute to the reaction force of either of the belt connections. This leads to incorrect reaction measures.An example would be a bicycle chain, which can be modeled as a belt with high stiffness. When torque is applied to the drive sprocket/pulley, it produces tension in the chain/belt which produces both a torque and a radial reaction force in the driven sprocket/pulley. It would be great if this reaction force was computed, but currently it is simply ignored.In these screenshots you can see a ramp torque being applied to one pulley, while the other pulley is constrained with a servo motor at constant speed. The measured belt tension, however, is constant. This is wrong, as tension should be increasing as torque is increased.If anyone knows how to make this measurement work, please let me know.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.