Recently active
In Creo Mold Analysis, While giving different step animation speeds in Melt front times and other features, Please add option to replicate the same animation speed in result PPT too.
Currently, depending on which tab Annotate or Sketch, or on which function, sketch, note, etc., certain entities cannot be selected for references.For example, when creating a note, it's leader cannot be attached to a symbol, only the model object or sketches. However, the note cannot be related to an object type sketch, only to other notes or symbols.Also, when sketching, axis, geometry, datums cannot be used for functions like mirror.Why not just make all entities, object, draft, sketch, symbol, format, -EVERYTHING- selectable for everything else? Why add extra code to differentiate?PTC, please make all entities selectable as references.
Please add the ability to select one or more components and Isolate (hide) all non-selected components in Assembly and Simulation mode. This will reduce the time to apply Simulation Interfaces, Springs, Features, and assembly constraints. This would be similar to the Isolate command in Simulate Component Display in the Results Definition Dialog box This idea is to quickly and temporarily hide components that are in the way without using layers or reps and to redisplay them again with in a second or two using the unhide command. Thanks, Don Anderson
The description column in the Information Window in Compare Parts by Feature is only 26 chars wide, while my information is much longer than that. So I get the following:DIMENSION VALUE: from 6.80with no "TO" value. This makes the information worthless. I put a ticket in, and was told that there is no way to change the width of the column. The log file that is saved is also truncated.
I would like to see the ability to split the model tree to see two different parts of the model tree at the same time (similar to MS Word and Excel split screen). I am often working in models with a 10 page tree and want to refer to datums at the top when working at the bottom. Similar issues occur in assemblies when assembling apart with datums.
When a featurefails (such as a round) you are in the following situation:If you select the failed reference and click on what you want to replace, Creo delete all references (see next picture)Hence to resolve the failure you must remove the failed reference (see next picture) and select a new one by holding down the CTRL key.This is, of course , not a replacement of the old reference (so all the children of the old missing reference continue to fail). It would be interesting to unify the behavior of a lost reference selection to what happens in the context of a redefinition of a sweep in which, if I select from the selection pane a lost reference (ex. a trajectory) BEFORE selecting the geometry on the model, the newly selected reference substitues (replaces) the old one (see next pictures).
Back in Wildfire days, it used to be possible to have tangent edges show as dimmed in shaded view.Apart from looking nice, this allowed you to simultaneously tell whether an edge was tangent or not, and also check all your edge lengths between rounds and other surfaces when constructing complex surfaces.Since Creo, tangent edges in shaded view can either be completely off, in which case you can't see edges lengths between tangent surfaces; or 'hard', in which case you can't tell the difference between a tangent and non-tangent edge - unless you work in a wireframe-type view, in which case you can't see the shape of surfaces.Yet another piece of lost functionality in the downgrade from Wildfire to Creo... please can we have it back? I can see no reason for making this feature non-functional!It's official too:https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS106133
Hi PTC, Please add ability to Component Repeat Placement to Include Duplicating Simulate Features like Contacts, Ground Springs and Preloads! How many times have you needed to repeat the placement of a component in an assembly. Wouldn't be nice if you could have the simulate features referencing the current component duplicated and attached to the placement of the new component placed in the assembly while your using the repeat command? Imagine you have 3 or more plates that you need to bolt together. This requires you to use solid models of the screws, studs, washers, nuts and bolts and you currently have to defined each contact between each part manually. This is a lot of wasted time if you have a dozen or more fastener locations to deal with. With this enhancement you would place the first set of components in one fastener location, define the simulate features like contacts, springs, preloads, loads, etc. and then while using the repeat command or pattern command you
Its blooming obvious really, and why PTC have never implemented it on ProE, then Wildfire, then Creo 1,2,3 I've no idea. My £50 Mac CAD package adds a sensible value fillet according to a value I choose in sketcher. Creo just scatters on totally random values and you have to go around cleaning them up and putting in values and making them match manually.So, here's the brilliant 20 year old CAD idea, when you select fillet in sketch, you get to type in a value, and, I think you might guess what's coming next, when you click on two lines to put a fillet between, it puts that value in, and on the next pair, this continues until such time as you type in a different value.I know its not a new idea. It really basic, but frankly a $X,000 CAD package really should include this shouldn't it?
PTC, Please Add Ability to Creo Parametric Simulate to Copy Components and or Sub Assemblies with related Simulation Features from one Assembly to Another Assembly and allow you to specify new feature references using Paste Special > Advanced Reference Configuration Include Simulate Features. Say you have multiple assemblies and you have a common load fixture that you use to apply load in your assembly simulations. Wouldn't be nice if you could set up one of the assemblies with the load fixture and all of it's connecting fasteners, idealizations, contacts, materials, etc. and copy this portion of the assembly with all of its simulation features from one assembly to another assembly and be able to specify the new interface references for the mating components on the new assembly along with the simulate feature(s) references? Think of expanding the Paste Special command Advanced Reference Configuration to include Simulate Features like all referencing fasteners, contacts
PTC, Please Add Ability to Creo Simulate to Copy Simulation Features From One Part or Assembly to Another Part or Assembly. This would allow us to copy contacts, fasteners, and etc that have all of their settings filled out from one model or assembly to another model or assembly without having to refill in all of the information again. Thanks, Don Anderson
Bonjour,il serait intéressant de disposer d'une commande permettant la délimitation d'une partie d'un pdf inséré sur un plan. Actuellement il n'est pas possible de délimiter une zone précise du pdf après l'avoir placé sur un dessin. L'opération est réalisable en passant par un document word sur lequel on insère le pdf, puis on rogne le document pour obtenir le résultat désiré mais la succession des opérations est trop longue.version Creo2
The new rmb menu icons are not intuitive and new and seasoned users alike are getting very frustrated at having to mouse over icons and wait for the text to pop up, where previously, the commands could be seen at a glance.Yet another drawback from PTC glomming on to Microsoft's poor vision of office functionality to make the menus more familiar "looking", but to the detriment of the function.An easy way to remedy this would be to allow the text to be shown next to the icon:PTC, please allow text to be shown for rmb menu icons.
We created https://www.ptc.com/appserver/cs/view/case.jsp?n=13254764 which may not be viewable to all customers. The idea is to provide a mechanism to control what is populated into the attributes table when selecting children in the model tree. The current downfall is that if you select children on a large assembly, you can experience a long delay before the table is populated and Creo View is unresponsive at this time. (Note: I'm assuming the delay is due to the population of the attribute table...PTC development needs to confirm.) It would be nice to a solution where I can select/define which columns of attributes automatically populate into the table when selecting objects in the model tree. There is very nice functionality within that attribute table with copy functionality and enabling pasting into Microsoft applications for future report and interrogation. I would like to take advantage of it. Microsoft didn't like the 7000 pages by abou
PTC, Please add the ability to suppress surface regions in Creo Parametric Simulate. There are times when you want to break up a surface to put a load on a portion of the surface for one analysis and also apply a contact on the same whole surface of the same part for another analysis. Thanks, Don Anderson
Relative to the main unit system, if you want to change the units of the load to another unit will be required unit conversion.In order to prevent the mistake, I want you to automatically numerically After changing the different units are unit conversion.After entering a value in the numeric field of the load, but it seems it is unit conversion by right-clicking, is less well-knownNot There are I think whether current situation.Please consider.主要単位系に対して、荷重の単位を別の単位に変更する場合は単位換算が必要となります。間違いを防ぐために、別の単位を変更したら自動的に数値が単位換算されるようにしてほしい。荷重の数値欄に値を入力後、右クリックで単位換算ができるみたいですが、あまり周知されていないのが現状かと思います。ご検討願います。
PTC, Please Add Ability to Select a Component in Creo Parametric Simulate and Show All of the Dependent Simulate Features for the component that's selected. This could be an enhancement to the Reference Viewer and also a Right Click on the component menu with a Info command window to show what simulate features are dependent to the component. I have a component in a assembly where I want to find all of the Creo Simulate Contact Interfaces that reference this component. From what I can tell, Reference viewer unable to display the Creo Simulate features that are dependent on a particular component. Info by model doesn't show the info either nor does info simulate. Please add this functionality so when one person needs to replace a component in a assembly they can identify what simulate features need to be re-routed to the new component. Thanks, Don Anderson reference: How to select a component in Creo Parametric Simulate and show only all of the dependen
Currently, family table instances are sorted by ASCII code during the replace function:INST1INST10INST1001INST2INST201Please allow the option to enable a natural sort which would put the instances in numerical order.INST1INST2INST10INST201INST1001
To be able to print from Information Window would be nice.
We typically turn off "enable model reflection onto specified room walls" and "enable shadows to be case from model onto.." by default in model settings, real-time rendering settings. Rather than having to turn these off every time, we'd like a config option to change these settings.
I want to create a note in Drawing or in 3DI insert a symbol in this noteI have to upload the symbol before
Please add the ability to place Drawing Views for Part & Assemblies with Flexibility. Adding Flexibility to Drawing View(s) to Allow Parameters and or Dimensions to be Varied will Allow for Alternate Installed State views to be placed without the need of using Family Tables in the parts or assemblies and will reduce PDM revision control issues. When you have a family of parts like nuts, bolts, or other hardware it may make sense to use family tables to control varying attributes. When dealing with a part that is hot staked or crimped in place when being install, it would be nice not to have to create a family table just to control the installed state for placing a drawing view to show the install state options. The two images below are derived using a parameter in the model tied to relations that control the shape and size of the two pins. The part made flexible after it's placed in the assembly changing the parameter to the desired state for the pins to be shown in t
Add functionality to create centerplane or centerline representations in a drawing. This is basic drafting practice that should already be available, and I have seen many posts on the internet alluding to the fact that this is not available in Creo. See support case #13272768 if possible.
Interactive Creo can specify simplified rep on assembly sub-component instance.Top Assembly + Sub-Component A (Simprep on) + Sub-Component A (No Simprep) + Sub-Component B :PTC support confirmed there is no API to retrieve simplified rep on an assembly sub-component instance.Please implement API.
As of Creo Parametric 3.0 M100, set annotation planes cannot be selected in the Current Orientation dialog box or "Move to Plane" for 3D annotations.I created a ticket with PTC and they said this functionality is not planned for Creo P3 or Creo P4.PTC, please allow the selection of set annotation planes as references for Current Annotation and Move to Plane.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.