Recently active
I can't get a 72-hour activation key for Creo Elements Modelling Express (6) any more , I get a "Cloudflare Internal Error" (Error 500) I've tried re-installing Creo and re-installing Windows (8.1 on a Macbook Pro Bootcamp) but no joy. It was working fine a while ago but I read that they have upgraded their security, maybe that's the cause. I've emptied cache. and tried different browsers. Is there a way to bypass cloudflare?
I am having trouble with the scaling on flat-to-screen annotations when publishing a .pvz from Creo for viewing in Creo view. Previously I was using Creo parametric 7, and the flat-to-screen annotations would show up approximately the size in the screen window as I had it set in Creo. After upgrading to Creo 10, the flat-to-screen annotations shrink and move on publishing. Is there a recipe file setting I can use to get them to scale properly? Creo Parametric 10.0.8.0Creo View 10.1
There are a plethora of discussions on converting real numbers to strings. While PTC tech support does provide two working suggestions, they are not simple. Beyond that, I have been unable to find anything on the PTC Community that will work in all cases. (See list at bottom.) With that as the background, here is my attempt at a robust real-to-string function that I believe works correctly for all positive numbers. Please test this out and let me know if you can find any errors with it. /* Real NumberX = 12.34567 /* Number of DigitsND = 3 /* Rounded NumberRN = FLOOR((X+(5/10^(ND+1))),ND) /* String Output - No Leading ZeroY = ITOS(FLOOR(RN))+"."+EXTRACT(ITOS((RN-FLOOR(RN)+1)*10^(ND)),2,ND) * To get a zero before the decimal point for values less than one, a conditional statement is required: /* String Output With Leading Zero IF FLOOR(RN) == 0 Y = "0."+EXTRACT(ITOS((RN-FLOOR(RN)+1)*10^(ND)),2,ND) ELSE &nbs
This is an annoying fringe issue. But I have tables with notes (notes have two lines of string values) and sometimes when I update a string value the note doesn't update in the BOM automatically. Nor does it update when I update tables. It seems to only update when I go to modelling and make sure it's regenerated and go to annotations click on the note and look at the text in text editor and then update tables. Does anyone have any ideas how to fix this? Maybe next time it happens I'll check whether it prints the correct info and creo is just showing the old info.
I have an old version of Wildfire 5 still running on a very old laptop. I would like to install the software on my new laptop as the oridgal laptop is on its last legs. But because I am no longer on maintenance this appears to be impossible. Login to my account then go to support and I am hit the same stone wall, you are not on maintenance. You cannot proceed bla bla bla. Is there a solution? Please help.
Draftsmen have two Screen, how to proceed to display Creo in only one window ? (a extended mode) Thanks for your help Best regards
Dear Team,We operate in an environment where several industries use Creo Parametric for the creation and editing of appearances applied to parts and wires. We are currently using Creo Parametric version 12.0.2.0.We would like to suggest an improvement related to the organization of custom appearances. Currently, all created appearances are grouped under the “My Appearance” tab, which mixes appearances intended for wires, solid models, and sheet metal. This limitation directly affects organization and workflow efficiency.Our suggestion is to allow the creation of new custom tabs or categories within the Appearance Manager, enabling users to separate appearances by application type (wires, solids, sheet metal, among others).This functionality would significantly improve ease of use when creating and editing appearances, as well as provide better color organization. As a direct result, it would also help reduce design time, leading to increased productivity and cost savings for companies.
Pro/Toolkit link error: “unresolved external symbol ProDimensionBaselineDirectionGet” — which library to link, and how to map APIs to libs?I’m building a Creo Parametric Pro/Toolkit application and I’m hitting a linker error when calling ProDimensionBaselineDirectionGet().Error : unresolved external symbol ProDimensionBaselineDirectionGet referenced in DIMVisitAction(...) — LNK1120: 1 unresolved externals.Already added libraries : protoolkit_NU.lib, pt_asynchronous.lib, ucore.lib, udata.lib, kernel32.lib, user32.lib, wsock32.lib, advapi32.lib, mpr.lib, winspool.lib, netapi32.lib, psapi.lib, gdi32.lib, shell32.lib, comdlg32.lib, ole32.lib, ws2_32.lib.Questions:Which specific Toolkit library contains ProDimensionBaselineDirectionGet()?What’s the recommended way to determine the required library for any given Pro/Toolkit API (e.g., doc index, API Wizard mapping, or dumpbin on .lib files)?Thanks in advance for your support!!
Currently using Creo 11. I've found some posts, but no solutions. Is there a way to automatically show external cosmetic threads in their typical format such as 1/4"-20 instead of 0.250-20? There was a post from years ago about editing the .hol table, but this method doesn't work as somewhere along the line PTC changed the format of the hole table. Now in the table, there is only "BASIC_DIA". If you edit the table to say 1/4 or "1/4", a value of 0 shows up in the hole note.
Hi, i hope to be in the right place for my question.I'm playing with Creo Live and i'm doing some CFD analisys on a mecnanical structure, i've manged to have the simulation running (it's similar to the wind tunnel example file).I was trying to get the total forces on a body or a set of surfaces but i have zero cluse on how to setup a measurent.Any help is wellcome.
Hi all,I'm working in Creo Parametric Mechanism to model a pinion and crown gear assembly with axial/radial offset between their axes. This is not a standard intersecting-bevel gear setup — the pinion and crown gear must mesh with a deliberate offset between their axes.However, when I attempt to apply the built-in Bevel Gear Connection, Creo throws: "The references for bevel gear connection are not coplanar”.How can I simulate bevel gear kinematics when the pinion and crown gears are offset (i.e., non-coplanar axes)?
I need to retrieve the X, Y, Z, and C offsets of all components in an assembly relative to the main part’s coordinate system. Ideally, I’d like to export these values into an external file (CSV or TXT).Is there a built-in method or mapkey/API/Toolkit solution to automate this?
Hello,Would it be possible to request an enhancement to ModelCheck?Specifically, I would like ModelCheck to be able to verify the Bend Allowance settings. For example, I would like to check that for sheetmetal parts, the “Bend allowance driven by” option is correctly set to be driven by the material.Even further, I would like to validate that the Sheetmetal Preferences are consistent with the smtdsnsetup.smd configuration file.Thank you in advance if this request could be considered.Adrien Blazy
I am using Creo Parametric Release 12.4 and Datecode12.4.2.0Hi, our company recently installed Creo 12.4. It is now in the standar configuration (inch, pound, standard ambient, exc... ). We want to transfer the personalized configuration from the version used till today (Creo 9) to the new installed version. How can we achieve this?PS. We have also a Creo Simulation pack.
Hi AllI have a surface in a copy-geom which references many features in my model.I now want to create a surface feature and remove the copy_geom so that it is no longer dependent on my skeleton model.Is there a way to reroute all the references in one go?Creo Software version 10.0.8.0
Hello, Looking for an explanation of some strange results I am getting in Creo simulate. I am wondering if I have the model setup incorrectly. The model is not that complicated. its a bolted assembly with some external masses (sensors) that are associated to the bracket via mass elements and weighted links. I am trying to understand displacement of the mass elements when they are excited at resonance. The oddity I am seeing is the massive displacement at frequency 0 (clearly not a real result). Any help or thoughts on this matter would be great! See the details i have posted below.
Hi All, I'm resurrecting an old thread as I am curious if PTC have resolved this modelleing limitation in later releases. I did try to message the moderator to reactivate the old thread but was informed it is best to start a new one: Re: How to model a helical sweep cut that matches ... - PTC Community Does anyone know if this is now possible in later relases? I am currently using 7 but no updates here. FYI my part does not have a standard helical pitch, I have datum curves generated by co ordinates, so it would not be possible to use the volume helical sweep which I beleive was a new feature added to V 7 to tackle this issue for set pitches.
Dear community, I can't add Insets to my figures.When i my collegeas open the same file they can add it.I can change the added insets from my collegeas.The mouse pointer stays the same.
Hello all, Does anyone have an example of how to use G93 in programming 4 axis contouring work with Creo Manufacturing? We have a machine with this capability and I'd like to try it. So far I have been able to get the post to put G93 in the right places, but it puts a F0. for feedrate. Even if it did work, I am not sure how this really works. G93 as I understand it interprets feed commands as inverse time. So if my feedrate in IPM is 100, but G93 is active, the move will occur in 1/100 seconds? How can that be right? A short move takes longer than 100IPM would linearly and a long move takes the same amount of time so it moves much faster than 100IPM? Maybe I am misunderstanding how that works, but that is how I read it. Thank you for any help!Matt
I am using Creo Parametric Release 5.0 and Datecode5.0.6.0Creating branch is manual cabling showing dotted line so unable to create wire or cable
Hello. I have a project in which I use AutoCAD. I have several files in .edz format that I need to open to convert them to a format compatible with AutoCAD. I open one of these files in Creo View Express 12.0: And the following message appears: Does anyone know the reason for this error and how to resolve it? Thank you in advance for your answers.
I am using Creo Schematics Release 7.0 and Datecode7.0.0.0I have created a custom catalog and added some connector there and need to edit for that password are required to set I followed the instruction but encounter the error in command prompt. F:\sch>"C:\Program Files\ptc\Creo 7.0.0.0\Schematics\x86e_win64\creoschematics\bin\password" set custome24 "ptc@123" RSDesigner Password Utility change_directory: cannot change working directory to custome24 F:\sch>
Hello All, I am attempting to download the free trial of Creo for an interview. After filling out the online form I received a thank you message but nothing else. What am I missing? Thanks
HI Expert,I have below condition and would like to know how the Creo licenses will be utilized. I have a single Windows workstation with Creo (WC 12) installed, and the machine has two local user accounts (User 1 and User 2).I would like to understand how Creo licensing works when multiple users share the same machine:If User 1 logs in and starts Creo, but does not close Creo before logging out or switching users, and then User 2 logs in and starts Creo as well — how many licenses are consumed?Is this counted as one license (because it is the same machine), or two licenses (because there are two user sessions)?If User 1 does close Creo before logging out, will User 2 be able to start Creo normally under their own login and use the same license?In general, what is the correct way for multiple users to share a single workstation and use Creo with the most efficient (optimal) license usage?Are there any guidelines or best practices for concurrent users on the same machine?Any officia
Hello everybody!I'm using Creo 7 to simulate a mechanism that uses a piston (slider constraint with lower and upper limit, the green part) to partially rotate a cranck mechanism . The problem is that the rotating part wants to pull the piston beyond its limits and then simulation crashes. Actually when the piston is fully extended it acts as a rigid body, What I'd like to do is:- Extend the piston- Start rotating the levers- Stop rotating- Retract the pistonAny suggestion? I thought to replace the piston with a single part (a rod) but as simulation is not "correct" Any suggestion?Best regardsStefano
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.