Recently active
aggiungere la funzione di copiare un foglio di Drawing senza perdere le sue funzionalità Parametriche
The work-around mentioned here is cumbersome.https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS124498We'd like a direct solution.
Good day Creo pros!After reading this discussion, Drawing/Drafting specific questions on this PTC Community? I would like to know the Community interest.If this would be helpful, please vote on this idea. I cannot promise an implementation date, but it would be during or post Jive upgrade.Best,Toby
It should be possible to configure which attributes of parts/assemblies are used for naming 3D objects in 3D PDF files exported from Modeling.
When creating a simplified rep and excluding components, each child of the selected component must also be excluded separately.I would like to see a check box or option to exclude the children as well. The functionality exits already as seen when deletinga component from an assembly and a list with children options is displayed
I have a board from a vendor with hundreds of components in one .prt (not to messy up our database). The components are broken up into a few dependent and incremental geometry features in the model tree. I've had to edit an Incremental Geometry feature to get one of the components to solidify. I would like to use the Import Data Doctor, which can't be done with an Incremental Geometry feature, only an independent or import geometry features. In order to get an incremental to a dependent, I had to deselect the ATTACH feature in the Incremental Geometry dashboard and then collapse the incremental geometry feature with another feature. Once that is done, the feature is now Independent. HOWEVER. when you deselect ATTACH, it does not solidify the surfaces in the feature. When converted into an independent feature, it still will not solidify the feature, EVEN when you select the solidify button on the dashboard. The ONLY way I was able to get this to work was to use the solidify feature for
I need a STL or JT file for a EMM-Check. EMM-Check is a software for the evaluation of the field of view of vehicles. The surface represents the mirror glass and hast to be a surface, no volume.Creo 2.0 can create an IV file from a surface and uses the chord height a parameter for the quality of the surface. That is exactly what I need for creating a STL file from a surface. Unfortunately Creo cannot load iv files.
Hello,TL;DRShortcuts and all_filer_project_dir files (perhaps others) should cascade properly through different customization levels rather than squashing lower-precedence customizations.I've just been customizing v19 Creo Elements/Direct at the site and user levels, and I noticed that most of the customizations cascade in a well-ordered way, with a precedence of factory/corp/site/user, which works great. But the shortcuts (e.g. sd_shortcuts.acc) and the all_project_filer_dir files do not seem to cascade this way. They are in the category of “first file found in…” rather than “all files found in,” as described in the startup order documentation. This is problematic because a user that adds a SINGLE keyboard shortcut to their user level (say through the Customize menu) has blocked themselves from seeing ANY changes to keyboard shortcuts at the site level.The idea is that keyboard and project directories should cascade in a similar fashion to all the other features. Keyboard shortcut add
When creating a BOM table and its associated balloons, if we change the table by another it is not possible to reallocate the first balloons to the second table and so we always have to restart everything from the beginning .
This idea is to provide some level of drag handles to edit feature at the modeling level rather than just the sketch level.With any luck, some clever PTC engineer can see a simple way to implement this to get splines into the 21st century in Creo.The idea is to use the modify sliders available inside sketcher to the modeling level so that edit feature would allow selecting multiple dimensions and applying them to a slider dialog. For consistency, the same "modify" dialog from sketcher would provide consistency.There are a lot of other improvements that should be made to splines but these things seem to get little traction within PTC. This feature is so outdated that core Creo is almost unusable for any level of industrial design. Manipulating splines today is almost a requirement in all but the most basic engineering solutions.Please see the video to understand why this is so critical. We need to be able to manipulate sketched splines in-context, meaning modelin
It would be really nice to be able to use the keyboard arrow keys to nudge drawing elements. Especially since Creo cannot make minute adjustments; users have to move dimensions far away then back in order to make small positioning adjustments.PTC, please allow the use of the arrow keys to nudge detail elements.
Currently, if users try to move a dimension just a tiny amount or flip arrows by clicking RMB without an accompanying move, the object jumps back to it's original position and state.I filed a support case for this and got the standard "works to specification". Tech support's workaround was to move the dimension further away and then move it back, which destroys the entire reference of the original position.It might not seem like a big thing, but for detailers who take pride in their art, it is extremely frustrating and baffling that PTC has introduced this unwanted snap-back feature.PTC, please allow precise, small adjustments to dimensions.
Currently, once text has been created, the only way to position it is to grab it and move it manually or offset it, even though when selected, it has positioning points. It would be very helpful, when creating symbols, positioning text in relation to objects, etc. to be able to select the text end or center vertices.PTC, please make text vertices selectable and usable for text placement.
Suppose you have in your model a sketch or a cosmetic sketch that you show on a drawing view to illustrate / explain / clarify / label an aspect of your design.In my case, I was manually labeling a bunch of holes of different type drilled into a side of a plate - "A", "B", "C" using a cosmetic sketch and text entities.In the drawing view, it didn't look quite right - some of the labels had to be moved to get out of the way of dimension witness lines etc...No big deal, but I had to switch back to the part-modeling mode, edit the sketch, then switch back to the drawing / regenerate and see if it looked better.It would have been very helpful to be able to directly edit a sketch that has been shown on a drawing view.I envision in the drawing mode, right-clicking on the sketch in the model tree and then activating "Edit Definition"; then selecting the view where the sketch is shown; at this point, the sketcher toolbar would show up and you'd be directly editing the sketch "overl
There should be an option for moving datums into a skeleton just like there is an option to move components into a new sub-assembly.
Currently, to "make a copy" of a format, PTC's best practice is a convoluted process to export the format entities and import them into a newly created format from scratch.http://support.ptc.com/cs/cs_26/howto/fom_size/fom_size.htmThis is because none of the format attributes, including Sheet Size cannot be changed once the file has been created. So, you cannot simply do a save as and modify size and detail elements. This wastes days of time when companies need to make changes to formats.PTC, please bring the format functions into the modern computing era and allow all attributes to be modified after formats have been copied.
When creating or editing a layer in Creo, it would be great it you can filter for coordinate system and just select all visible coordinate systems in the geometry window by dragging a selection box over the area. I don't know why this isn't the current functionality if it works for the other datum methods.
How it works right now:Inside the reference viewer there is an graphic display of all references. Right now it is possible to assign different colors to the different reference types by clicking the icons next to the check box.What does not work so well right now:The coloring information that has been assigned to the reference types will be lost after the next Creo start. In the new session all colors are turned to gray. They must be defined one by one again within each Creo session.What would be an improvement:It would be an improvement if these colors could be saved as system default and always available when starting a new Creo session.
In Creo: Put the Event Manager, or another Windchill Status monitor in a more obvious location When using Creo linked to Windchill users do not have a readily available way of knowing the status of the Windchill link to their Creo Session. The best example of this is when a Creo check-in fails. The failure message only shows up in the messages at the bottom of the Creo page and the well-hidden Event manager. It would be a benefit for troubleshooting to have that fail message in an obvious place. Possibly give the users the option to put the event manager, or some other Windchill dashboard, front and center so they can monitor the status of the Windchill connection to their Creo session. Bob LohbauerMedtronic
Export dxf direct from 3d models without creating a Creo drawing. Creo 3.0 has this option, but it is creating a facet model only, exporting to many lines which can not be used in programming a laser cutting machine for example.
I'd like to show an assembly in sequence as it would be manufactured, with each new sheet adding a new BOM item and it's corresponding Balloon. This is done by showing a different Simplified Rep on each view/page (Step 1, 2, 3...)Rather than fixing the indices (Item Number) for each part on every Simp. Rep., can I fix the Index for items across all Simplified Reps?In addition, can there be a way to add the respective balloons without needing to include a hidden BOM on each sheet?
The length of the wire of a spring (constant or variable) cannot be measured in Creo 2.0.However, this should be possible.The workaround to calculate the length by dividing of volume by cross section or to measure the length by redefine the sketch in a quater circle is complicated.
Hi PTC, i am giving some idea about dynamic probe. 1. If there are two result windows open and we get the dynamic query at any point in first window, we can't get dynamic query at same point in another windows. There must be a provision to manual enter the point coordinate to get result value. 2. There must be toolkit API to get the result value of given coordinate. 3. if we save some result file (.rmd) with dynamic probe values and reopen that file again, All dynamic probe value must be visual as like before. Thanks Shashi Kant
When switching between windows while in Simulate mode the performance is poor. This is because the moment you switch between models that Simulate creates simulation geometry which affects the loading. The problem is that the simulation geometry is cleared when you exit the window. This means that the simulation geometry has to be re-created when you switch back to a component that has in fact previousmly been loaded.This is less of a problem when working with Simulate integrated with Creo Parametric, as you can close the Simulate Application, and switch windows in Creo Parametric. However, in the case of the Simulation Standalone Application this becomes a bigger problem.What I would suggest is that a type of smart regeneration be implemented that caches or keeps already loaded simulation geometry in session.Otherwise, an improvement of the performance when switching would also be beneficial.
Other than Creo, every 3D modeling software I have used has the ability mirror components in an assembly. This is done by selecting a mirror components command, selecting a mirror plane, done. I found all kind of "chatter" on the PTC websites and on bulletin boards, etc. I've looked for at least an hour and still no intelligent solution. This needs to implemented ASAP!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.