Recently active
Would it be possible to be able to open a 3D model of a part/subassembly in creo view from a drawing/BOM table also in creo view? If not is there any other PTC software (other than parametric or any of the actual modelling softwares) that could do such a thing? (Currently using Creo View Express 11.0)
Hello: I have several sets of constraints for a part, when I active ptc_constraint_set parameter , sets are displayed as per attached image , but sets drop down shows only one set at a time. Is there a way such that all sets available can be displayed under drop down for ease of selection. Thanks
When reordering Model Tree, It is too easy to accidentally move part to subassembly (Can take long time to undo). Creo should ask confirmation when user clicks Expand All, because it takes so long with large assemblies.Actually I have never needed to use expand all, but i sometimes accidentally click it when i try to click Collapse All. Btw. why Measure -tool is so slow unless you use selection filter?
Hi all, My R&D department have a request for which I cannot find a solution .We are in CREO 7.0.2.0 and we want to show it in MBD. We can attach the datum to the surface, but not aligned it to the dimension (as per the following pic)How can we do it?The 10° dim is a 3D dimension from the sketch. ThanksBest Regards
Some of us are on 7.0 and some on 8.0, but no one can seem to get the MIDNIGHT theme to load as default on start up. We can get the DARK or LIGHT or DEFAULT themes to load, and we can do custom as well, we just cannot get the MIDNIGHT to load. We have even tried loading the MIDNIGHT theme, then changing a graphics color in order for the menus to all switch to CUSTOM, and then saving that creo_parametric_customization.ui file in our start in location. But nope... shows it is a Custom theme but menu colors are all the DEFAULT theme.Thanks in advance.
Hello,The following PTC article details how to obtain references from Annotation elements,https://www.ptc.com/en/support/article/CS289474However this only is viable for annotation references of the type: PRO_ANNOT_REF_SINGLE: /*---------------------------------------------------------------------*\ get the references for the AE \*---------------------------------------------------------------------*/ status = ProAnnotationelemReferencesCollect(&elem, PRO_ANNOTATION_REF_ALL, PRO_ANNOT_REF_FROM_ALL, &ann_ref); int num_refs; status = ProArraySizeGet(ann_ref,&num_refs); for (int i = 0;i < num_refs;i++)//all references of selected item { if (ann_ref[i].type != PRO_ANNOT_REF_SINGLE) continue; //proceed this loop only if the single reference is NOT a PRO_ANNOT_REF_CRV_COLLECTION or PRO_ANNOT_REF_SRF_COLLECTIONHow could the surface ID's be obtained for type PRO_ANNOT_REF_SRF_COLLECTION (or even PRO_ANNOT_REF_CRV_COLLECTION )?Thank you.
Is it possible to add a picture (JPEG) in Creo schematics?
I am creating a hole table through datum points like feature name "POINT" & its "X,Y,Z" measurement through cs_o but when datum points go beyond 9 for e.g. "PNT9" then it sort by again first digit means it will go like 1 then 10,11,2,3,4 likewise (refer snap for more details).I have tried to increase decimal point from 1 but it won't get sort out.Need help to how to sort this double digit figures in ascending order & Is there any way to make this hole table parametric if point location is updating it will directly show on table without adding it again. Hoping for the solution from PTC! 🤞Application :- Creo 10 Paramertic
Hi, We need to find the stress when the part is twisted at an angle. It's shown in the capture-1 below that a motor powers the pocket at one end, while the other end has a stopper. load (capture 2) & constrains (capture 3), kindly advise me on how to calculate the stress values at various angles? Plastic is the material that is used & currently I am using Creo 7 Thanks
Please no snark. I struggle finding useful info on creo forums. I have done my due diligence. We have a C size drawing that the left and bottom margins are off the page. I have struggled with how to even ask this question. I am aware there are differences between format and template, but I don't know where to start. I just want to "rightsize" our C drawing template to export with correct margins, not offset as they are now.
Hello to allWindchill is working on it using Creo illustrate. Previously, I was using Creo View Adapter to convert illustrater data without any problems.However, I found that it is an illustrater adapter.The document says that it converts illustrater data with this, but I don't know a separate difference.As a result, what is the difference between the Creo View adapter and the Illustrater adapter? I was wondering why the Illustrater adapter has a separate installation file.
Hi,I'm work in Creo parametric users Support team user in an industrial Company and i was a question about the scale on 3D model. Few users ask question to see in an 3D model windows a dynamic scale reference show in a corner like to possible in others CAO Software.Thanks for your help
1. Describe the ProblemEnd users are unable to view the license usage either from Creo+ portal or application.2. Are you using a workaround?Only administrators can view the license usage3. What is the use case for your organization?Users would like to check the license usage for floating licenses4. What impact does this problem currently have on your organization?Users get depend on admins to check
Hello,I need to lend a CREO license for 30 days, do you have a procedure on how to do that?
Hello I have a problem with calculating model in Creo Simulate. The only difference of those models is mesh size. Solution on the left has no AutoGEM controm featuresSolution on the right has applied Maximum size AutoGEM control globally 25mm and locally on contact regions 7mm.Why it doesn't converge when AutoGEM has been applied applied?
I was wondering whether it is possible to have an interactive BOM table in creo view. The idea would be that if a user selected a part in creo view, it would highlight in the corresponding row of the BOM table (and, if possible, vice versa). Any sort of similar feature or function would also do.
Creo parametric 7.0.0.0 No windchillJava toolkitUser case:1. Creo window 1: opened assembly in creo like this:top.asm.1|--------sub1.asm.1 |--------part.prt.12.Creo window 2: opened assembly in creo like this:sub1.asm.1 |--------part.prt.13.Creo window 3: opened part in creo like this:part.prt.13.Put the latest version files(sub1.asm.2 part.prt.2) into the file directory;Question:1.Which API can load the latest or specified file version without close the window 1,2,3;2.Do not close all the files and reload ,because the feeling is not good;3.The best way I want :Load only the necessary new version files.Thanks!
Pro web.link There is no console controller of the embeded browser of the creo parametric. How can I debug my web.link scripts?
I want to add an additional leader to my drawing on the outside radius dimension to call out the internal radius with it. How can I add the additional leader?
I have a very large 14GB design. I deal with sensors small things attached to structure so use a clearance filter to find it. Once I found all the supporting mounting structure i deleted all the unused structure using the tools edit structure. I have tried both delete viewables as well as advanced delete.There was no change.. I then deleted everything but 1 screw... Still a 14gb file... What gives I want to delete the actual items from the file not just a visible part number from the list. Please advise.
Is it possible to have 2 Creo sessions running in parallel with the 1st session connected to Windchill and the 2nd one working in local? Creo Parametric 7.0.2.0 As soon as I connect one session, the other session is connected. It's exactly the same behaviour when I disconnect one of them from Windchill.
I want to assign only the first 7 characters of parameter (string) to another parameter. How can I do that via relations?.Creo 9
Hello, I have generated a new Schematics license, when the machines try to access it this error appears, what can I do?
Hello, Since a week, my Creo display is with wide spacing between lines. (see the document in attachment) Do you have an answer how to get back to normal space? Thanks,Luc
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.