Recently active
When one creates a curve from ibl file with Get Data > Import and then uses this feature to create some other features that depend on this one, after this feature is updated to a new source (via ATB update and change link), all children will lose reference. So in effect the update to a new source of this feature is a destructive operation and doesn't really represent a redefine of a feature. The internal feature ids are recreated which causes all children to lose reference. This behavior renders this kind of feature useless since the references to children cannot be maintained. Why such a behavior was implemented in the first place in the software which is based in parametric modeling is quite strange. So, this "product idea" is a request to make this feature actually work as it should and as other features in Creo work and that is to be able to retain connection to children after redefine.
When you create an Inheritance Feature, all the entities that were contained in a layer in the base model, in the inherited model are all visible and not contained in any layer. Moreover the user is not allowed to put any feature contained within the inheritance feature in a layer (CREO warns you that "Cannot select feature from Inherited model in this context").This affect negatively the view management display (expecially in drawing mode).It would be usefull if the inherited model could inherit also the layer structure in some way (as a subnode layer, for example).
When selecting the layer tree of an individual view, all of the layers are turned on. I would prefer that the layer status stays the same as the drawing layer status until I unhide a layer. It should also remain drawing dependent until a change is made.I mostly modify the layer status of a view to show one or two items in that view such as a cosmetic sketch. When everything is reset, the drawing layer status, that has already been set as needed is lost.
Would like to be able to use multiple cycles of EVALGRAPH in combination with trajpar similar to the cycles which can be used using trajpar with sin.The graph entities should be able to be multiplied along the trajectory.
In a drawing, for a shaded view, give the possibility to define a layer state different from the model driving that drawing.For the moment, for a shaded view, the layer state always follows the model's layer state.See https://support.ptc.com/appserver/cs/view/case_solution.jsp?n=CS43026
It is not possible to directly display a Datum Axis in a Half View if the axis lies on the half view reference planeThe workaround suggested by PTC:Change the View Visibility to: Full ViewShow and position the model datum axis annotationSwitch the View Visibility back to: Half ViewIt would be nice to directly be able to show the axis on a half view.
There is no API to find global clearance in Creo 2.0 using toolkit. We know API ProFitClearanceCompute to calculate clearance between two components only. We are looking for something which does it for entire assembly.
It must be possible to call out the repeat index parameter value (as by &rpt.index for example) in a drawing note of PTC CREO.
This is a new format for additive manufacturing supported by a consortium of big companies. Additive manufacturing is being called the next industrial revolution, and Creo Elements/Direct Modeling NEEDS to be a part of that.
Release 190 introduce MERGE CONFIGURATION, that is a great function that customers were waiting for.But in 19.0 release if you merge 2 configurations, drawlist and camera informations of merged configurations are lost.If configurations are used only to show some elements, and customer needs to merge several configurations, there are no benefits by MERGE commands.So my proposal is: Add drawlist and camera information to MERGE CONFIGURATION
I have a suggestion that plunge milling be improved in NC. Plunge Mill manufacturers suggest that the tool back off the cut after plunging, then retracting prior to taking the next plunge. This does not appear to be possible in Creo 2.0, and from what I understand 3.0 cannot do it either. Tools would not stand up to the current method of being dragged back across each cut, so I cannot see a use for creating a plunge milling sequence with the available sequence definition.
I need to have a steady center curve for building sweeps. To get this it is necessary to have center points of all the sketches that are chained together to build the sweep.Presently you have to use the Behavior Modeling extension for the center point ability, and it is very tedious.1) Extrude the sketch2) Use the Analysis function3) Save center of gravity point as feature4) Capture this point in the extruded sketch5) Repeat this for every center point neededWhen you have upwards of 20 sketches included in the center curve for a sweep this is very time intensive.
Problem: extension lines for diameters and radii can be, not off in drawings. This one gets confusing drawings for manufacturing that are not standard for handicapped. The problem occurs when each produced diameter / radius measure. When shown the diameter dimension extension lines must be separately displayed., But also can not be clipped then. Proposal: extension lines even when produced diameter sizes produce only via context menu - but they should survive over the arrowheads. It is good if you can also clipping the extension lines for diameters and radii and they can also hide again / off would be. The uploaded images are once the radii / diameter created using Pro-E 4.0, Standard-compliant, as it should be. And created with Creo 3.0, not reach compliance. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hello,It is very easy to load a 3D file from windchill to modeling with some lisp commands, but loading a 2D (MI-file) isn't possible.If you could load 2D files with lisp you would be able to automate many things that always have the same procedure.Thanks
Actual there is no automatic way to find out the NC-Sequence which causes the error: "Output on profile failed. Please, check CUTCOM setup." When there are a lot of sequences, it is a big task so find out the failed sequence. It would be very nice to have an automatic method to find this. I refer to call 13127016
Curve pattern is actually unusable for us: trajectory is moving for each instances along the profil....Wee need a real curve pattern wich allow to follow curve direction & the instance must follow the curve.To understand, try to do a pattern along a closed curve with 2 circles...Thanks
I would like to see an option to Output all Operations under the Save a CL file tab. Many projects have multiple operations and each operation may take a few minutes to output. In order to efficiently output all of them, you need to stay attached to the computer and output each one individually. I would use an "Output All Operations" button most every day.
It would be nice to have the ability to click on the diameter box and change to Radius. Also, it would be nice to click and change from (in.) to (mm) in this display box. Posted for a fellow user.
Mass properties is a critical part of our business. We have run into cases in which the mass properties have been significantly off due to plating. Currently there is no easy way for me to assign additional mass due to plating. I understand that I can manually designate mass properties or create a relation and add mass that way but those methods are not parametric.There should be a way to assign a material to a single feature or a way to assign a density and thickness to selected surfaces.The solution should be implemented so it drives the PRO_MP_MASS parameter.
Often I assemble a component that I had made (long time ago) with predefined flexibility, only to have to open this model in a separate window in order to examine it for what kind of "options" were built into it.Therefore, I suggest these improvements:1) When someone creates a model with a predefined flexibility, and you assemble this model into your design, the system will show you a message box stating that this component has some flexibility already predefined. It would be useful if the original content creator could craft a note that would be displayed at this point so to better explain to you what the intended flexible options are.2) The system displays another column, perhaps called "Description", in all the variable items tables. Via this "Description", the original content creator could communicate to the end-user the intended design variations.
The HTML report that is output from Creo Elements\Direct Design Advisor (FEA) can only (by default) display images in the report via VRML viewer. In Part Library Icon, a real time screen can be created as a thumbnail for an Icon. I would like to suggest a similar feature here. This allows the user to position the model in a preferable position and create a simple image - although, preferably better integrated into the FEA report.I appreciate that the HTML code in the document.html can be edited and pre-determined image be defined in the code, but this is clunky. Minimum expectation of an FEA report is that it can display an image by default.Additionally, VRML is no longer supported in Chrome. Probably the most popular web browser in use.PTC Details:https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS240432
Currently only SolidWorks 2014 files can be loaded.
It will be very helpful if we can control the size of step image in the main process document, in this way we can use print as pdf to obtain the report of manufacturing process. The work around to obtain this is way to much time consumer. See the picture attached, before and after I resize the html picture.
Hi,the dialogue boxes appears after starting Creo3. There isn't a common disapear option for administrators which allows to hide this box for each user.An SPR exist, but PTC R&D don't want to fix, because of the required information for every user.https://support.ptc.com/appserver/cs/view/spr.jsp?n=2201262For my point of view, an adminstrator should able to decide how to inform the user.This windows appears once again a user have deleted his local creo_parametric_customization.ui.Best regardsBernd RossbergerKTM AG
Please allow us to create, change status of and edit Simplified Reps while in Creo Parametric Simulate / Mechanica. Currently if you want to narrow the view of components for building a large simulation you have to exit simulate to create a simplified rep or change the state of a simplified rep. Thanks Don Anderson
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.