Recently active
When I run the weblink example, pfcSelectionExamples.html, it works mostly fine, but the model name always comes up as undefined. Not matter what I do with my own code that I've made, I can't seem to get it working either.Does anyone else have this issue? Is it because my files are from windchill, and not stored locally?I know this is the third weblink post I've made lately, but information on the topic is sparse to say the least, so any help would be appreciated. Thanks!This is creo 9.0.3.0
Some of our harnesses in the real world are coming out longer than the dimensioned drawing shows when bundled.I measured in Creo. If I measure the lengths of the individual segments, I get 350mm. If i measure the overal wire, I get 379. That's over an inch of difference.Any help would be appreciated on how to alleviate this.Creo 9.0.3
Hello, I use 3D annotation to dimension my assembly. The dimensions are organized in annotation features and with combination views. The models of a combination view are also restricted by simplified reps. The 3D model dimensions are shown on the drawing. There are different views corresponding to the simplified reps. To avoid a cluttering view when opening the 3D model, the annotations are removed from the default all combination state. When I activate another combination view (also another simplified rep) the shown model annotations, like dimensions and geometrical tolerance, disappear from the view. The tree icon is greyed out and with at black square overlay. I can get the dimensions back when I add all the model annotation to the default view. But as mentioned this is not what I would like, because it clutters the view when opening the 3D model. There are some SPR's related to this: https://www.ptc.com/en/support/article/CS11232
I am using Creo Simulate Release 6.0 and Datecode6.0.2.0 I would like to confirm the setting of SS400_mmns.mat in the default "Material Directory" When I open the material definition of SS400, the Young's modulus is set to "216001MPa". Generally, the Young's modulus of SS400 is often written as "205000-206000MPa", but if it is set to "216001MPa", it is thought that there will be some difference in the deflection of the analysis results. Is there any reason for the setting value of "216001MPa" above? Also, could you please provide me with any reference material that shows the Young's modulus as "216001MPa"? ---------------------------------------------------- Translated text from Japanese to English using google translate Subject - 「材料ディレクトリ」(Material Directory) 内にある SS400_mmns.matの設定について Body - I am using Creo Simulate Release 6.0 and Datecode6.0.2.0 デフォルトの「材料ディレクトリ」(Material Directory) 内にある SS400_mmns.matの設定について確認したいのですが
I have many users that use the Dark theme in Creo parametric 9. The note color is yellow for that theme. When exporting to a PVZ the text color is also yellow. How can I change that so they can keep the dark theme and export the note text to black or whatever preferred color?I tried changing the the system_colors_file to C:\Program Files\PTC\Creo 9.0.3.0\Common Files\text\system_colors\light.scl but that did not resolve the issue.
The picture is from a PVZ in creo view 9 saved from creo 9. The leader should be attached to the other end of the gold part. The gold part is exploded but the leader points to the spot where it would be if the gold part was not exploded. How can I fix this?
Hi all, In Creo 8.0.9 - while i preview a subassembly from Creo it is showing some different subassembly to the actual subassembly. It is particularly for this subassembly it is mismatching. I have attached images for reference.
Hello, This morning, I reopened some files (from Windchill workspace) and continued work on them from last week. At some point, I realized that I wasn't connected to my organizations Windchill server, so I saved all of my work, and closed Creo (through task manager), reopened, and logged into the server. At this point, many of the files I was working on stopped appearing in the directory. What's weird is that some files were reverted to a very old state (prior to this morning session), while some file which were created recently (during morning session where not logged into server), were saved, and some files created and saved prior to this morning were completely deleted. I have no idea what to do and this is causing many hours of lost work. Please help! (Creo Parametric 9.0.3.0)
Hello, Using the technique described in the post by Jossie titled "Ordinate Dimensions on a detailed view - different sheet," I am having what appears to be random instances when the Baseline Ordinate dimension jumps from the main view to the detail view. The process I use goes like this:1. On a default drawing view, that includes ordinate dimensions, I create a regular dimension.2. I right click that dimension, toggle to ordinate.3. Then I select that ordinate dimension and select Move-to-View, selecting the detailed view for it to move to. So far so good. What happens next has me baffled as I cannot find a consistent cause. While making other typical drawing modifications at some point the Baseline Ordinate dimension jumps from the original view it was created on, to the detailed view. This both places the Baseline in a location where the edge would be if the view wasn't detailed, not helpful, and worse it kills the attachment for the other ordinate dimensions on the d
1. Are you using a workaround?Not possible yet2. What is the use case for your organization?The Windchill BOM and Ref. Designators currently can not bee shown on a drawing and in the BOM balloons. This should be possible so that the Windchill BOM is linked associative to the drawing and vice versa3. What impact does this problem currently have on your organization?Huge. Now we have a Manually creation of Bom balloons without a link with Windchill Ref. Des.Describe the ProblemSee above
1. Describe the ProblemWhen mirroring parts within an assembly, the parts must be mirrored one at a time. When creating a large, symmetric assembly, this can be quite arduous and requires many features and click to achieve.2. Are you using a workaround?The options that we have found are to either create the mirror features one by one or to create a sub-assembly and mirror that. Using a sub-assembly adds another level to the assembly, however, which is not always ideal, and means that we have to add gathering parts in the Windchill BOM, which we prefer to avoid where possible.3. What is the use case for your organization?Sometimes we have an assembly where the parts are symmetrical and need mirror images creating, or sometimes just need the placement to be mirrored. Obviously, we could just mirror the parts individually, or place them as required, but using a multiple part mirror function would lead to a significant reduction in the time it takes to create such an assembly.4. What impac
I tried to create pdf file using trail file. but pdf generation step will not record in trail file.I am also tried to add pdf generation Map key in trail file. can anyone please help me. how to create trail file that can create pdf file.
Hello, I've recently had a problem where I would add files to my workspace, but when I open my workspace in Creo, they will only show up if the workspace is inactive. The moment I activate the workspace to open the files in Creo, the files disappear, only to show back up again when I deactivate the workspace. As a result, I am unable to open the files in Creo. Has anyone else had this issue? I've tried making new workspaces, reinstalling and uninstalling, etc. I am on Creo 8 and 9.
Once I open the STEP assembly file, it shows an assembly containing one sub-assemblie, as shown in the attached image.How can I avoid this sub-assembly file?
Currently in the drawing of Creo Parametric 6 the weld symbols are generic symbol saved/hide in a system folder (System Syms). There is no special button for the weld symbol. Then the users have to choose the Weld Symbol file and then select a lot of checkboxes (hide in other checkboxes) to edit the symbol as you can see in the following picture: Notice that the preview of the symbol on the right is small and every time you have to change the dimensions of the preview panel and enlarge the window. And every time you change something, the preview loses the zoom. This interface is difficult, slow and sometimes frustrating. And you cannot change the type of Weld Symbol, you have to delete it and create another symbol from another file and clicking the same checkboxes. So I ask you to replace this method with a special tab for the welding symbols, like what happened for the Geometry Tolerance in Creo Parametric 4. I know that there is a Welding applica
please let me know, how can i set white background after rendering attaching here with one image which i am receiving after rendering .
We are using the welding module in Creo but we are having problem obtaining the weld spesification number in reeat regions in the table on the drawing. Like sequence ID and rod material is no problem, however &weldasm.weld.SPECIFICATION_NUMBER or &SPECIFICATION_NUMBER does not work, link to the documentation are here: https://support.ptc.com/help/creo/creo_pma/r9.0/usascii/index.html#page/welding/About_General_Parameters.html# We guess it is not possible with repeat region to collect sequence ID with the same specification number or?
All,Can Creo Illustrate open native Creo Parametric files such as assmblies, parts and drawings?Or does and export file need to be created in Creo Parametrics such as Step?Wayne
When creating a new part, we start with a start part template, such as a round part. Instead of manually double-clicking each dimension and typing the values, we would like a window to open when the template is called. This window will prompt us to enter the outer dimensions, and the new part will be generated with these specificationsplease find the attached image also
Hi Guys,Watermark which i created for lifecycle state and set as "Send to Back" it's not working it's still appeared in front of annotation and view. Regards,Aj
I am using Creo Parametric Release 9.0 and Datecode9.0.7.0We are using symbols in notes/tables with "&sym(...)" syntax. In some cases we reuse the same line in a note by copy paste function (using ctrl+c, ctrl+v).We noticed that doing so we get sometimes additional symbol, which is not visible, but placed behind note (not visible and not embedded in the note). Moreover, when symbol is being deleted from the note there is artifact of a deleted symbol remaining behind the note (not visible and not embedded in the note anymore). Those "background artifacts" causes issues when trying to update any symbol overlapping with artifacts.
I need to maintain the length of 4 locked flats on a locked shape. The depth of the locked shape is variable and is controlled in a family table. I have 8 rounds which are applied to the transition between horizontal and the locked flats. If I increase the thickness of the shape the 8 constant radii will alter the position of the 4 flats that I need to maintain. Normally I could keep a parametric relationship of these flats within a sketch. To avoid reworking my geometry and just for the sake of curiosity I am wondering if there might be a way to parametrically have the inside corner radii to decrease and the outside corner radii to increase based on the thickness change that was made to the shape? Below is an image of this shape which defines the solid rounds and identifies the flats that need maintained.If this isn't parametrically possible I will modify the model to develop the relationship that I need using a sketch with all of the radii and a
Option CENTER_LINE is default when I dim circular in CED Drafting 20.7. Please guide me how to set up option NO_CENTER_LINE is default.
I have an assembly that is broken into several different simplified representations. I want to use a BOM table in my drawing for consistent balloon numbering. The best way I see to do that is to use a component parameter "LINENUMBER" in an assembly that will store the line number for a bom table in every instance simplified reps. I've entered Linenumber as a component parameter for a few components, but a problem I run into is that when I have instances of hardware I have to enter this parameter individually for all the hundreds of screws and washers. Is there a way for me to enter the component parameter for all instances of a component without having to work with Windchill? Creo 7.0.7.0
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.