Recently active
With the config.pro option 'measure_auto_replace_mode=yes', when one want to measure distancefrom 1 vertex to several second points, only for the first of the second points, the CTRLbutton is needed and for the rest of the 'second points' , the CTRL button is NOT allowed.The need of the CTRL button for measuring does not make sense so CTRL button shouldnot be required at all as it was in Pro/ENGINEER Wildfire.
3D Documentation -Create drawings by transfering Doku Levels - the distance between the views in Annotation should be adjustable. So far, there is no possibility. It must be reworked manually.
3D documentation -Create drawings by transferring Doku Levels - view label should be adjustable - there is no setting for the view label a default name is created.
3D documentation - Dimension settings for lines, text, tolerances .. every value should be set individually. As for the dimensioning in Annotation.
The current units for strength values are not common for engineers.In the real world N/mm² is used instead.
This is a 3 part product idea. 1. Add the ability to turn layers on and so one can hide construction surfaces so as to be able to select solid model geometry surfaces for Strain Vector Plots. 2. Add the ability to view vector strains only on the outer surfaces or surfaces in direct line of sight. (option to turn off vectors inside the part or on the other side of the part) 3. Add the ability to hide items selected in the selection window so one is able to select the base geometry for which results are needed more easily. There are many times when you want to use Strain Vector Results in Creo Simulate to aid in placing strain gauges on physical product being tested. Currently it very hard to view the strain vectors on the surface nearest to you that you are viewing. Thanks, Don Anderson
It would be handy to select multiple references using the find tool in sketcher. The example is when in sketcher and you need to add references, lets say points as the most practical example, you can add all the necessary points at one time. I think this could be limited to a few object types, but useful overall. Points, CSYS, Curves are the items I would like to see at a minimum.
Please add the option when creating surface regions to have them spilt into separate segments. In the part below one wants to put a constraint on one side and a load on the other side. Currently you have to create 2 separate surface regions. The first surface region goes all the way thru the part with no option to limit it to just one side of the part. This would reduce the number of surface regions that need to be made. Thanks, Don Anderson
When 3D geometry in the area of an already defined bolt circle is modified (e.g. angle between the elements) and the view in Annotation is updated, all the already defined dimensions and the orientation of the center lines should be updated correctly. Currently those modifications force the user to redefine the bolt circle in Annotation.
Guten Morgen,in Creo vermisse ich schon länger die Möglichkeit, ein Muster wie folgt zu erzeugen:- Mustertyp: füllen (skizzierte Kontur)- Anordnung: Rechteck (Abstand x <> Abstand y)Uwe Jung
Need to constraint or fix the distance between two view.. For Example : Please find below snapshot for reference I had modeled a shaft of 100 Dia and 1000 mm length and placed same in drawing with scale factor of 0.15 but when i reduced it size to 100 mm length views get merged. My concern is that views should maintain some specified horizontal distance between them and should not get merged.
I would like the option to align views using datums.
Currently it is not possible to apply the Solid fill option on Offset Cross-sections (only available for planar cross-sections).It would great if this option was also available for offset sections.An example of where this would be useful is in the case where a Full(unfold) cross sectional view in a drawing is used to clearly layout the internal workings of a complex design, like a gearbox/transmission.Here you could fill each component being sectioned with a different colour, creating a clear and useful view of the design internals.For a workaround one could of course apply hatching with really small spacing, but this drastically affects performance, especially on larger more complex models.
Bonjour,Il faudrait rendre possible la mise en plan avec "ombrage avec réfléxion".Ceci permeterait de faire de belle presentation aux clients.MerciSalutationsFabio Giannotta
Currently only 2d sketch can be rotated or swiped to create a surface or solid or cut. Please implement creation of geometry by sweeping or revolving of a 3d curve.This function is available in Catia for many years.
it would be useful to create a mirror mesh within CREO Simulate (in a symmetric part or assembly) even in case of non-symmetric loads, you could have a more homogeneous result.
If you cut your model to use symmetry in CREO Simulate, also in the result windows you will see half model. It would be nice if the software "mirror" the sesults to display the full model within the result windows. A similar behaviour is implemented, with a different aim, in the "Visual Mirror" command, located within the "In Graphic" toolbar, when you create or edit a style feature.
Because the publish geometry feature only shares geometry as it exists at the end of regeneration, it should always reside in the footer to make that clear.
Mold manufacturer need to bend solid geometry on a specified surface with draft control. Espacially modifying side walls according to pull direction while bending solid geometry on a specified surface is very important for mold makers to not to waste time for detailed shaped models.In attached video you can see Creo and Siemens NX comparision for this subject and easily notice that in Siemens NX this option is provided in a very easy way.
We could use an unbend feature for pipe similar to unbending sheet metal using a bend table. Also auto generated forming table to place on print to include straight section lengths, bend angles, & rotations.
With configurations, you can have the position of parts in an assembly be different. Position is an 'instance' attribute for the parts in the assembly. It would be nice if other instance information could be altered when a configuration is activated. This would include the part's 'instance' color and transparency. So when a configuration is activated, the parts could move, change color, and become semi-transparent to make it easier to design.
We quite often have to duplicate drawings and keep the dimensions as applied on that sheet. We will save as the drawing, so that the dimensions are there. But the dimension ID's are exactly the same as the original. Because of this the original drawing dimensions will become detached (Pink dims.). If you reattach the dimension on the one drawing the other drawing dimension will become detached. If the save as would repopulate the dimension ID's this would not happen. Besides this happening on component drawings it also happens on Assembly drawings when we need to copy them.
Creating a support as easy as creating a constraint, for example by being able to select a surface or datum plane as 'invisible wall'.+ opposite component can be left out (no need to mesh it and define conditions on it)+ easier/quicker and thus more robust than a ground spring>weighted link>surface region combination
Currently, in order to change the type of a hole in a pattern, the pattern must be deleted, the hole redefined and then the hole re-patterned. When the model gets to the detail stage, if the engineer or designer has used straight holes instead of tapped holes, or vice versa, the detailer has to delete and rework all of the hole patterns, which also causes the axis to be renumbered. This can then lead to downstream feature failures and assembly failures. In all, this lack of functionality can cause many lost days of work.PTC, please allow holes in patterns to be changed to any type of hole without having to delete the pattern or renumber the axes.
Actually the collison checking mode of Creo manufactoring mode works only in the turn plane.Geometry which is placed differently in the room is not detected.In turn mode, however, the complete rotational geometry must used for collision control. Video Link : 6891
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.