Recently active
1. Describe the Problem Even though it doesn't achieve the goal such as safety factor, it creates a shape with nothing any alert or message shown. 2. Are you using a workaround?No, I am a sales engineer for Creo at Distributer. I got this question from our customer.3. What is the use case for your organization?It useful for sell Generative Design module with Creo.4. What impact does this problem currently have on your organization?If a message is displayed if the goal is not achieved, at least the customer will not mistake the resulting shape for something correct.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.3.02. What is the problem?The "View Manager" dialog box column widths are not saved after user adjustment inside the dialog box. Example - The user opens the View Manager dialog box to view a long list of custom simplified representations. Some have longer descriptive Names that are partially obscured by the second column due to the default dialogue box column width. Name column width, making it difficult for the user to distinguish between them. To reveal the full Name, the user may choose to either autofit by double clicking the vertical column border line in the heading bar or click and drag the border line to expand the width. After closing the dialog box, the width resets to the initial narrow width and the user must repeat the column adjustment process, adding time to the workflow.3. Are you using a workaround? If
Is there a quick way to project a bunch of separate (imported) curves to a single sketch without clicking through them all? So i have a bunch of curves or faces that i would like to turn in this case into a cosmetic sketch, but I have had situations where i have wanted to extrude a complex projection too. So in this case i have a bunch of planar curves (yes they are planar they start out as a projection): So any quick way to project all of them into a sketch? A script perhaps? Running creo parametric 9 though i can update to 11 if necessary.
Creo Parameter of type "Real number" is transferred to PDMLink with scientific notation. Eg: 0.2234 in Creo is being displayed in Windchill as 2.2340000000000E-1 The value to be rendered correctly” has been created. How can we display it as it is?
I am trying to place a surface finish symbol on a drawings and the message box at the bottom says, "The selected surface is already consumed by surface finish sf0 as a restricted reference. Select another surface" Where would I find sf0, and how did it get consumed?
Hello,I try to customise my postprocessor configuration to make it better. At the beggining of each of my programs i have a line with multiple initialisation codes. I never really asked myself the question where they came from since I needed them.With tests i discover their origin. They come from the FIL EDITOR in LOADTL SectionDYM=POSTF(13) This option is responsible for :- Calling tool- Put the good offset- And the prep codes Can someone explain this witchcraft to me ? And how to modify the prepcodes ? Thanks in advance
Creo has the capability to create "Standard" holes (internally threaded features). Part of that functionality is to read information from the .hol file and transfer it to the Properties tab and (at least a subset of info) to the Note tab. The note then can be displayed on a combination state. This is very handy. But the same functionality does not exist for cosmetic thread . Make an extrude or revolve then apply a "Standard" cosmetic thread. It reads the same .hol file and transfers it to the Properties tab, but there is no Note tab. You're stuck having to make your own note. Not very handy. This is an enhancement request to be able to auto-generate notes for external cosmetic threads (externally threaded features). 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.A&D industry , Role is cad/PLM manager 2. What version of Creo Parametric ar
So I have multiple models in a single drawing, if I just select "&view_scale" it pulls the parameter from I'm not certain. But IIRC there is a way to select the ID number for the individual component and pull up what that parameter is. I want to say I used this successfully many years back in a large assembly and/or family table. Any help would be greatly appreciated. Please see the image for reference.
We are using Creo 9.0 When we open "Cache Manager" in Creo, we select parts and try use function "Refresh", we are getting this error: "Cannot get directory contents. Failed to load library libpro2soacore. Please ensure that the library is installed in path" I am attaching config.pro file, couldn't find this library: "libpro2soacore"... Our configuration is using config_9050 and config.sub to create config.pro
Hello together,can you please explain what do the following abreviations concerning the configuration of Hole Function mean (wenn möglich auf deutsch): 1) PERCENT_THREAD2) CLEAR_DR_CLOSE3) CLOSE_DEC4) CLEAR_DR_FREE5) FREE_DEC6) CLEAR_DR_MED7) MED_DEC😎 CBOREDIAM9) CBOREDEPTH10) CSINKDIAM11) CSINKANGLE12) BOTCSINKDIAM13) BOTCSINKANGLE
For reasons I don't want to bother you with, I would like to export the mechanism model (like the set of mechanism connections or constraints ) of an assembly to MatLab. A mechanism model is basically a set of coordinate systems with transformation rules the describe the relation between a slave coordinate system to its master coordinate system.How could I export the relevant information out of an assembly or mechanism model? (This is not a Creo version related question, but I use currently version 9.0.5.0,)
Hello, I try to find a way to desactivate the spindle (or set it to 0) between two sequences with the same tool.Example between 2 engraving sequences at the end of the first, spindle Z return to a safe plan, rapid move to the second sketch and engrave but all with the spindle at the same speed. For the moment I tested with inserting CL data but i think it's not very clean and risky. Is there a more professional method ? Thanks in advance.
Greetings,I am currently focused on designing and optimizing a pipe connector that transitions from a diameter of 100mm to 125mm. This project involves utilizing Computational Fluid Dynamics (CFD) and BMX studies to refine the design parameters. I am using Creo 11.I have noticed that most tutorials define an inlet and an outlet, with the inlet specifying parameters such as pressure, volumetric flux, or pressure inlet, and particles being released that move through the part, which is logical. InletAt the outlet, it is often defined as a specified pressure outlet, and no particles are released there. My question is: how do I determine when to release particles or not? Additionally, sometimes the outlet pressure is set to 0 Pa, while other times it is set to the normal atmospheric pressure of 101325 Pa. How do I know which pressure to use? OutledBest regards,Spy
1. Describe the ProblemUser Defined Features (UDFs) are one of the most powerful tools in Creo Parametric, but they still have the outdated interface based on the Menu Manager for their creation and modification:I propose replacing this old interface with a dedicated tab that clearly shows what is being done, with selection collectors listing the modified entities and the external component.This change would be consistent with the interface of the Merge/Inheritance and Copy Geometry features. 2. Are you using a workaround?I use the current interface hoping for a future improvement.3. What is the use case for your organization?This old interface is always a source of complaints and difficulties from users. New users always try to stay away from any Menu Manager, and experienced users hope they never have to edit or update UDFs.4. What impact does this problem currently have on your organization?User Defined Features are considered one of the most useful tools in Creo Parametr
how to add working directory in format.working directory file path need to appear in drawing sheet after calling sheet format
Just got bumped up to Creo 11 and needed to work with someone else's files from 10.Try to open the top level assembly, immediate crash to desktop in 11.Try to open the drawing for that assembly. Also immediate crash.Open the files in 10 from the old computer (which is in a dungeon) and I see that some parts are getting flagged as unstable.I track down and remodel those parts and the file still crashes in 11.I check the log file and the last part before the crash is a big circuit board.The circuit board model opens but it's an import of an incredibly detailed model. My computer, which is a little old now but extremely beefy, stuggles opening it. There's individual circuit traces and individual part labels as solid models on the board. There are tiny resistors that imported as five bodies. There are also a bunch of vertex errors on the tiny text and some of the parts. I go into Import data doctor and delete a few thousand bodies and surfaces, the board
Hello team, I want to rearrange the dimension text symbol by default.
Hello all, creo Piping module is not look simple as legacy pipe feature. Is there any way to create pipe feature (legacy) in creo toolkit as shown below. Thanks.
Hi,the green object has two constraint sets (1 and 2). I want that the pattern of the green object (1 green + 2 red), follow the first object (green) in his new set constraints (constraint set 2): what is the procedure to obtain this? Best regards
We have a customer who requires 3D models:Objective: Get native S3D objects. The Contactor could send the SEED to a Vendor/Supplier to generate the package model. This model could be copied in S3D Contractor production plant. Does Creo have the capability?
I have wf4.0 floating license, but lost the installation file, who could tell me where can I download or get it from PTC offical portal or link ? thanks
Hi there,is there anyone, who managed to run Creo Parametric on a Linux machine? I was able to start the installation in "wine", but it always has problems installing the "Platform Agent".
I found the drawing setting for the default font size for new views however, I can't find any options to change the font style for only view names. Our views are like shown below where the view name is larger and bold and was hoping to find a setting to have this be automatic. Section A-A We're using CREO 7 currently
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.