Recently active
The "Export to ANSYS Mechanical Format" command is not working. I am able to "Save Simulation Data" as a .apr file in the below folder. However, when i try to export the .casdat file using the Export to Ansys Mechanical Format command, the status bar says that it saves successfully, but no .casdat file appears in that folder.
I want to change the File Name with the Common name in the Model Tree.I can expand the model tree with the Common name but not switch them. Does anyone know if and how it is possible to do that?
Add centreline/symmetry line/crosshair Hello, I'm looking for a function to display or add a centreline/symmetry line or crosshair of a hole/round element. The crosshairs are not displayed using "Show model annotations". Actually exactly what is described right at the beginning of this guide for Creo Elements: https://support.ptc.com/help/creo/ced_modeling/r20.7.0.0/de/index.html#page/ced_modeling/OSDM_Annotation/am_aux_geop2.html In the screenshot I have inserted the crosshair whose function I am looking for in green. I use Creo 9.0.8.0 Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Mittellinie/ Symmetrielinie/ Fadenkreuz hinzufügen Hallo, ich suche nach einer Funktion, eine Mittellinie/ Symmetrielinie bzw. ein Fadenkreuz einer Bohrung/ eines runden Elements anzuzeigen oder hinzuzufügen. Über "Modellanmerkungen anzeigen" werden die Fadenkreuze
Hello am using Creo Parametric Release 8.0I saw this video, i tried the same method as you explained in my system with example i could not get the different color in drawing I have tried using different appearanceCould you please help me on this. For example, I have created new rep, new appreance and I have even created new combined state in view manager as shown in video but which ever combined state is active only that that colors are visible mode.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo view 10.0.0.0 Build 26 EN2. What is the problem?Could you please add the functionality to “toggle” commands on and off. For example, to draw a picture using the Freehand command, I need to click on the freehand button every single time I draw a new line. This is very frustrating. Or perhaps just a shortcut key to redo the last command? I will greatly appreciate any help with this.3. Are you using a workaround? If yes, please describe it.No workaround that I know of.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.When we review drawings we have to make basic line drawings. This slows down that process significantly. Incorporating a toggle on repeat last command will save time and wont be frustrating. Currently I don't like using creo view because of this, this will make a HUG
Hello, Is it possible to redefine/ modify pattern table using Creo toolkit C++? I am trying to update the dimensions using Ptb file which is used for read function of pattern table. I am having issue to build element tree of this pattern table and to define first instance of this. Is there any sample code for it?
Dear Creo-Team/Community,I'm currently trying to open Creo after some months. Creo asks for an activation key, which I've tried to created manually on the redirected creo.com website. Sadly it isn't working anymore. Can anyone please help?
ModelCheck is able to check which tolerancing standard is selected on PRT and ASM (see https://support.ptc.com/help/creo/creo_pma/r7.0/usascii/model_analysis/modelcheck/start_config_options/tolerance_type.html#). This start configuration of ModelCheck is also needed for DRW since these properties should not differ. Also there should be a check for the version that is selected (toolkit-value will be available for 7.0.8 https://www.ptc.com/en/support/article/CS359079). Field of usage: Using the right syntax ruels for GD&T: https://support.ptc.com/help/creo/creo_pma/r7.0/usascii/#page/whats_new_pma/detail-setting_syntax_tolerance_check_version_2.html
It would be very useful to have the KeyShot rendering engine available also in Creo Illustrate and not only in Creo Parametric. It is a big lack for a software that creates images and videos for services. For example, the following video is impossible to obtain with Creo Illustrate: https://www.youtube.com/watch?v=XQQNz_RppB0
I'm working with ME'scope and Creo Parametric 11. ME'scope can export structure files in either .UFF (Universal File Format) or ASCII Text (.txt) files. I don't see a way to import either of these into Creo. I want to be able to modify the parts from ME'scope so that I don't have to re-design them in Creo from scratch. I know I can import a Parasolid to Creo, but I don't know if selecting that option with the ASCII spreadsheet (.txt) file will work. I thought I would ask the question before wasting time on experiments that may not work.
Hello,I have multiple skeleton in my assembly. I use to ProAsmSkeletonGet() to retrieve skeleton as ProMdl Skel. It retrieves first skeleton from model. I want to get also the next skeletons to perform operations on feature in it. Can anyone one suggest how do I retrieve second skeleton with help of ProAsmSkeletonGet() or any similar function to perform operation on feature in other skeleton in same assembly.
example attached preload = 50 kN
I have encountered an issue that I cannot seem to solve, when working with sheetmetal parts. The sheetmetal part has different features to be placed 360 degrees around a cylindrical object, for laser engraving purposes. So the thickness of the sheetetal is on paper irrelevant - so ideally so thin it is just visible on the assembly.The dimensions of the sheetmetal part matches the diameter of the object and so does the features on it - atleast theoretically. The sheetmetal bend is set to 360 degrees and to keep the dimensions on the inside of the bend.But, when assembling the sheetmetal with the cylindrical object, I get small inaccuracies on the technical drawing of the assembly - the angles between the features do no longer match, which is an issue on the given task.I have found out that changing the thickness of the sheetmetal impacts the position of the features, even though the part is set to keep the dimensions on the inside of the bend, and I do not know why. I am worki
Hi all, As the title suggests, I don't know if deleting my creo_parametric_customization.UI file is my only option in getting to do my work using Creo Parametric 10.0.1.0 Things worked fine yesterday. But this morning, if I don't delete the UI file, the software crashes after showing the splash screen. Traceback.log suggests "EXCEPTION_ACCESS_VIOLATION" If I delete the creo_parametric_customization.UI file, software works fine. But my ribbon and quick-toolbar customizations are gone... And attempting to import them from the backup .UI causes a fatal error crash. Any suggestions? I suppose it is wise to keep a backup of a (working) creo_parametric_customization.UI file...
I am using Creo Parametric Release 3.0 and DatecodeM190Je ne trouve pas la modification de tous les parametres pour une FDU existante.J arrive a modifier la table de famille, kes references mais les offsets predefinis impossibleLa fdu est cree a partir d un table de trou ISO, les cotes de la table de famille sont modifie mais lors de l import de cette fdu dans un PRT, les cotes differents de celle de la table.Si besoin je peux vous transmettre le fichier gph
Hello,I recently began to see the circles in my drafts as polygons (see image attached). It began since:1. I have a new ultra wide monitor2. run some updates on my computer.It's only an issue when in draft or sketch mode, other programs are not affected (like when exporting a draft to PDF). I'm using Creo version 8.0.3.0 Thank you in advance for any help.
Greetings, In my current endeavor, I am focused on designing and optimizing a pipe connector that transitions from a diameter of 100mm to 125mm. This project involves utilizing Computational Fluid Dynamics (CFD)/BMX studies to refine the design parameters. As I am relatively new to the field of fluid simulations, this project serves as both a challenging and enriching learning experience. For this project, I am employing Creo Parametric 11. My initial design incorporates an inner core that assists in the diameter transition, aiming to maintain efficient fluid flow. The preliminary design intent is illustrated in the first image attached. Front viewBack viewSide viewSide view with extension tube for CFD analysisI have extended the tube on both ends to enhance the accuracy of the CFD analysis. Could one please confirm if this approach is correct? Upon advancing to the fluid analysis phase and establishing a fluid domain, I encountered an unexpected issue—noticeable fr
Hello,How (where) could I find in my configuration of hole the following specifications for a Kato hole?The problem is you can find them in Creo but not in the Hole-configuration. (Core) Drilling depth DRILL_DEPTH 2. Thread depth THREAD_DEPTH 3. Thread length THREAD_LENGTH Thanks, in advance. Djiki Wilfried
We had set the default bend radius for everyone by adding smt_dflt_bend_radius smt_thickness*0.5 to our config.pro so everyone had the same bend radius's and was more accurate on how it was built. I was designing a bunch new Sheetmetal parts only to realize the default is now .03 which cant actually be made when your are bending .25" thick Sheetmetal. So i went to check the configuration editor and smt_dflt_bend_radius now has a cross out symbol. Is there a new way to set this so everyone has the same default bend radius so no one forgets and sends out a part that cant be made?
1. Describe the Problem Reference: Ticket - 17466086 Article - CS425857 PCB design is critical for our business. We would like a drawing table which can show a BOM of components of the PCB assembly. For example one row of the BOM table would show that item 150 is Resistor XYZ with a quantity of 5 and a description of ABC. However, we want one more column which will combine all of the reference designators from the model into one cell (from Parameter ECAD_REF_DES). For instance, it would say R1, R2, R7, R9, R13. The completed row would look like this: 150 XYZ ABC 5 R1, R2, R7, R9, R13 2. Are you using a workaround?We need to export data from Creo, using a mapkey, and then have a batch file try to manipulate the data. This is really not ideal.3. What is the use case for your organization?Generating a BOM within Creo that includes Reference Designators. This can then be used to easily cross-check to our ERP and ECAD
Is anyone have ever configure Creo Parametric FlexLM to work within 2 network using a NAT?We have 2 network, so that the people on the second network can ping the FlexLM on the original network we configured the NAT to point the IP and Port 7788 of LM_Admin but the users on the NAT side cannot get licensing. as we run the ptc_status all license are shown "counted":
Hello all, I am trying to import datum points from .pts file stored using Toolkit C++. I am loading the pts data using WfcIntfPTS and also getting feature using GetFeaturebyId(). I am unable to find method to assign this imported pts file to the the feature.Can anyone suggest me the method to do so? Or can suggest me method to import this .pts file and assign it to datum points feature.
CREO 9I'm trying to create wire spools using an .nwf style format created in excel, based on:An exported file based on a set of manually created wire spoolsTemplates from @BrianMartin The syntax examples found here: About Neutral Format Wire List (ptc.com)A .spl file written from a manually created wire spoolI've tried the following format:"NEW WIRE_SPOOL DATAPARAMETER MIN_BEND_RADIUS 9PARAMETER THICKNESS 3PARAMETER UNITS MM"... as well as variations of it to include "PARAMETER NAME_FORMAT W-###", "PARAMETER COLOUR [COLOUR]", "PARAMETER DENSITY [DENSITY]" & "PARAMETER MASS_UNITS KG" and exclude the "PARAMETER" from every line as per the .spl file. I've tried including the this text in the .nwf file for my part designation data, and copying the formatted text into Notepad and save it as a .spl file as I don't have access to Creo schematics. However I keep getting the following error message, with the number changing based on how many parameters I'm trying to use
Hi, I tried to export my part as step with different default cys But in my result step file the default cys z and Y axis are interchanged. Check image for details. Help me with a solution. ThanksRam RDesigner
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.