Recently active
Datum axis cross hair reoved from display when datum axis converted to set satum --> in dimSet datum axis disappears when placed in dim
hello i navigate on web and i see solidworks have on site parts from users its a good ideea for creo have this?
i would like an input box for a structure browser search or filter in the way Modelmanager does it with brackets.it would be easier to store searches and filters and when activated a search string can be entered in the input box.example: searching for a part's name now requires you to start 'define new search' and fill in the required criteria, perfoming another search later almost requires you to start over.if i would get an input box for my search and i could store this search, then my second search action would go much faster.
Customer need to define different kind of tools like "Barrel" tools to use in their milling operations. Standard tools are not enough to define and use this kind of tools in safe for manufacturing.
...such as many of the buttons on the Applications tab. Ideally, grey them out and superimpose a small gold padlock over the graphics.
Drawing table repeat regions provide powerful capabilities to create tables. I believe with complete toolkit support, repeat regions could be even more useful.An example is to create a customized BoM count for a part which is included only in certain assemblies.I can envision several drawing table repeat region TOOLKIT functions which need to be added. Included are functions to add/delete filters and relations. Also, pre- and post- notification functions for filters and relations.
Hello,I would like to know if someone has been able to made a fatigue analysis (through the fatigue advisor extension), starting from a non linear structural analysis.I know that it is not allowed by Creo Simulate, and I think that it could be nice to have.In particular, the description of my problem: I have a static structural analysis on an assembly, with non linear interactions between components; then I'd like to make a fatigue prediction on each single component but unfortunately I cannot use the static structural analysis run on the whole assembly.Does someone have a suggestion?Thanks,ElenaN.B : This Idea was originally created by Elena Dordoni as a discussion
Currently switch between fully and partially affected object with the TAB key during frame selection is not possible in the 3D viewport in Annotation. This behaviour is inconsistent.
Why should 3D annotating be different in terms of flexibility than what's possible in 2D anyway?See https://support.ptc.com/appserver/cs/view/solution.jsp?source=subscription&n=CS224756
Prior to committing to an action, it would be helpful to know how long to expect that action to take, and since this is often related to the size of the files, this information should be accessible by those not already familiar with the files. Larger files will clearly take longer to act upon, so an expectation would be set with this information. Ideally this could be used to drive an estimate of how long the action will take, but that would introduce additional variables, so total file size would be a good start.
Wenn in einem Modell ein 3D-Dokuebenensatz erstellt wurde, und es eine aktive Dokueben gibt, so wird bei der Form- und Lagetoleranz die aktive Dokueben nicht automatisch im Menü definiert. Man muss dies manuell definieren.Dies sollte automatisch vom System definiert werden.
Currently only the PDF format 1.3 is supported by the generic PDF print driver used for 2D output. Text entities of the drawing won't be converted into searchable text entities in the PDF file. This is currently a limitation that many customers ask to eliminate. Also the use of PDF with database Model Manager and Windchill can be improved form this enhancement.
Case Subject:When nesting parts in NC Sheet metal I need to set the part spacing in X and Y to different values. By not having this function decreases yield of parts on the sheet and increases machine cycle time due to not being able to utilize common line cutting. (Turret Press)
Please add the ability within Creo Parametric Simulate to select multiple analysis / design studies and delete all selected at the same time. Currently you can only delete one at a time which can be very time consuming when updating old and new designs. Thanks, Don Anderson
Please add the ability to edit Model Feature Dimensions like points, rounds, curves, protrusions, etc. while in Creo Parametric Simulate. There are many times when you have to go out of simulate to make adjustments to a model to address issues found while reviewing the results. Having the ability to edit the model dimensions directly in Simulate would reduce the time to make designs more robust. Thanks, Don Anderson
Please add the ability to change a model dimension(s) from within the design analysis and store the new values in the design analysis. This would give users the ability to do what if analysis or test multiple configurations for a part or design without the need to save multiple models for multiple configurations or test variants. Examples: -Tent leg with multiple positions -Back Hoe / excavator with multiple positions - A part where you want to apply the same load at the same relative position to the part but need to change the distance from the part for multiple analysis. The idea is to store the variant info in each design analysis that relates only to testing the part. Only one part exists in production, but may be used in multiple assemblies which drives the need for many test states and load locations relative to the part. This would allow multiple test states to be accomplished at the part level with out creating multiple parts or saving the part multiple times for
If I have a drafted rib, I need to be able to specify the dimension at either the top or the bottom of the rib, but the current 3D annotation does not allow me to specify the direction for the measurement.
Hello,we would be interested to get a new funcionality in our current Creo 2.0 m140 version. When we save the drawings locally it would be great if Creo 2.0 could generate automatically a native format of the drawing, for example gif, jpeg, bmp or a png.The PTC support team recommended to start a request to get this functionality may be in a newer Creo version.Thanks in advance!Michael
Currently, in the Creo NC/ manufacturing, the simulation tool paths are all shown in green. However “Plunge”/ “approach” and “retract” movement are very critical trajectories in the machining and cutting tools are very easy to be collided with workpiece during those sequences. In order to distinguish the difference, I suggest that “Plunge/ approach” and “retract” should be made in different colors for easier distinguishing when checking the tool path.
Quick access to drawing (.drw) that has the same name as the part / assembly.Quick access to new drawing (.drw) with the same name as the part / assembly.I tried to do with mapkeys and is not possible.There are scripts in WWW, but should provide it PTC
Hello, Mrs of PTCI would be well that the products of PTC (On web) were more specific and separate.Example: PTC Creo Simulate (Simulate and Advanced Simulation Extension) with Structural and Thermal.There should be a document for Simulate Structural and other for Simulate ThermalSome customers doesn't find information about ... for example Thermal.... is more specific about StructuralThanks,I Hope it can be possible.BR,Gorka GarcíaIntegral PLM Experts (Integral Innovations Experts)
It would be nice if, in the context of a simple part, you could be able to create a multibody modeling based on quilts (the same way as CREO manages mold volumes within a manufactoring assembly file). This would give greater freedom to use the top down design in a very simple and effective way within skeletons models (for example in the management of complex welded structures).
Wenn ein Machining Element erstellt wird, kann der Ebenen-Copilot über die rechte Maustaste auf eine andere Ebenen-Copilot Einstellung geändert werden. Sobald die Position definiert ist und man auf "Weiter" klickt, springt die Einstellung wieder auf die Standard Ebenen-Copilot zurück. Es sollte eine Möglichkeit bestehen, dass man während des Machining Prozesses eine permanente/haltende Ebenen-Copilot Einstellung definiert, welche nach Abschluß wieder auf den Standard zurückgestellt wird.
Currently when an Appearance is applied to a solid model, only existing geometry is referenced. This means that of the model changes to create new surfaces, the Appearance will not apply to them. One example this is critical for is color variants in a Family Table, and as a result, if changes are made, they could require each color variant to be manually modified. If Appearances catered for geometric changes that create new surfaces, these extra manual steps would not be required.
We analized a same plastic injection using the same information material and injection properties in many software. Also we did the same analysis on Plastic Advisor Creo 2.0 and every tests results was satisfactory and consistent with the real injection of the product.Just in Mold Analisys (Moldex 3D) of Creo 3.0 the result is not correct, is unreliable and is different from the real result.The customer is it very dissatisfied with the Mold Analisys module, since he purchased the module but it is not presenting the promised benefits. He's wanting their money back.Other customers may have the same problem and we request from PTC an effectively solution ASAP.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.