Recently active
1. Describe the Problemwould like to be able to export strings from EXCEL analysis. Currently, numerical values can be exported.2. Are you using a workaround?no3. What is the use case for your organization?Strings are sometimes used in relation and parameter creation.4. What impact does this problem currently have on your organization?He writes notes and then looks at them and types them in.
1. Describe the ProblemWant a function to clean up data files (.prt, .asm, etc.). If I use the same file for a long time and repeat modeling operations (create, modify, redefine, delete), old information is accumulated, so I want a function to erase them.2. Are you using a workaround?no3. What is the use case for your organization?Sometimes a previous PART file is copied to make changes and modifications.4. What impact does this problem currently have on your organization?Old information affects the creation of new relations and parameters.
1. Describe the Problem While there is a very limited API subset for rule based layer manipulation, there is a missing API related to determination of 'associative' attribute for rule based layer 2. Are you using a workaround?there are no known workarounds.3. What is the use case for your organization?retrofitting existing models with the new layers - need to query if an existing layer is ruled based and associative4. What impact does this problem currently have on your organization?removing of layer items from the existing layers is not possible for associative layers. removing the layer itself - opens a pandora box...
1. Describe the ProblemWith other topology tools, our engineers are able to specify a minimum and maximum thickness. These are often driven by the manufacturing method we are planning to use and supplier feedback. 2. Are you using a workaround?The "Material Spreading" constraint is a workaround if staying inside of Creo. It's just requires so much guessing and checking, leading to lots of unnecessary runs. Specifying values would be more straightforward for us. Not having min. and max. thickness constraints is one of many missing features which leads our engineers to use other topology tools outside of Creo from the start of their design process.3. What is the use case for your organization?We design lots and lots of castings, which generally have a min. and max. thickness to be successfully manufactured.4. What impact does this problem currently have on your organization?Inefficiency in Generative and engineers choosing to use other topology tools outside of Creo.
1. Describe the ProblemUsers have to solve for either structure or modal analyses separately in Creo Generative. We would like the ability to solve for these methods simultaneously as the part is experiencing these stresses together. Having the model accounting for both pieces yields valuable information that you cannot get from viewing these results separately as you can weigh the two against each other where one load might not be as significant as the other.2. Are you using a workaround?Running models in separate modes and trying to weigh these out separately.3. What is the use case for your organization?The use case is almost any part where we have a modal requirement and a stress requirement. Having the ability to solve both of these directly leads to learnings you cannot get from looking at them separately.4. What impact does this problem currently have on your organization?The impact is that this leads users to try other topology tools outside of Creo that do have this capability
Hi,We're switching from Creo 4 to Creo 11. I had a mapkey to insert a symbol at an absolute coordinate. Now this mapkey doesn't work anymore in Creo 11. I tried recording a new one but I get an error message. The new mapkey for Creo 11 looks like this :mapkey ca4 @MAPKEY_NAMEInsertion d'un cartouche sur format A4 horizontal;\mapkey(continued) @MAPKEY_LABELInsertion cartouche A4;\mapkey(continued) ~ Activate `main_dlg_cur` `page_Annotate_control_btn` 1;\mapkey(continued) ~ Command `ProCmdDwgCrSymInstCust` ;\mapkey(continued) ~ Select `main_dlg_cur` `Symbol:casc343974600`;\mapkey(continued) ~ Close `main_dlg_cur` `Symbol:casc343974600`;\mapkey(continued) ~ Command `ProCmdPmaOptSymLib` `PRO_SYMBOL_DIR/cartouche_gravlor.sym`;\mapkey(continued) ~ Timer `` `` `popupMenuRMBTimerCB`;~ Close `rmb_popup` `PopupMenu`;\mapkey(continued) ~ Activate `rmb_popup` `Absolute Coordinates`;\mapkey(continued) ~ Input `coordinputs` `XInputPanel` `2`;\mapkey(continued) ~ Input `coordinputs` `X
Hello, I'm working in Creo 10 and making an assembly with alot of parts. I have made a Family Table where I hide some parts in a few instances to highlight parts in each instance. Now I have a drawing with The generic model containing the whole BOM list. I also have the instance models in the same drawing that I want to attach BOM Balloons to. However when I try that It doesn't work, That is because when i add the generic it generates a separate BOM with different numbers and it is tied to a separate BOMIs there some way to have the instance keep the generic BOM so I can add balloons? The same problem occurs when I use simp. rep. I also can't use Layers because I have used the pipe tool it doesn't seem to hide the pipes when I added them to a layer and hide it. Instead it just hides connected parts that I have.
We are trying to compare the .cgm drawings and pdf drawings in Creo view, but the files are not loading.For .cgm it just blank and for .pdf it throws file is invalid. Also have attached file for reference
I am using Creo Parametric Release 8.0 and Datecode8.0.4.0Internal volume for fluid analysis cannot be created as no single solid surface exists as a boundary surface on one side of an internal volume (irregular nozzle orifice). Attempts to create a bounding surface have failed, including creating boundary blend surfaces and thickening them to create a selectable solid both surrounding the intended boundary and covering the intended boundary.Here are the errors that I faced[Internal Volume] Feature failed to regenerate.The system could not create closed volume.Recommended actions:First, check the selection of bounding surfaces. Make sure all the surfaces that bound the volume are selected. Remove irrelevant surfaces from the selection. Then, check the selection of seed surfaces. Make sure seed surfaces are selected from the volume envelopes. Avoid selecting surfaces with multipleouter edge loops. Make sure that each opening to close must be surrounded by a single surface, either a boun
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Automotive Industry. My role is Design Optimization Specialist. Stakeholders are all Creo Parametric users within our Company.2. What version of Creo Parametric are you currently running?Creo Parametric 73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When you create a swept blend and select a section, there isn’t a good way to quickly see where the points are that you can drag the arrow to. I have attached two images for reference. The first image shows the section is selected but there isn't an easy way to see where all 10 points are located. The second image shows an example of the user interface displaying where the points are located. 4. What is the use case for your organization?Several of the parts created by our organization utilize the swept blend tool. 5. What business
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Space industry, Mechanical team lead. My group / colleagues2. What version of Creo Parametric are you currently running?9.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We run generative design on our local machines. It would be nice to be able to add multiple design studies in a queue both structure and modal types, with different design criteria. For example through a drop down option for "Optimize now" or "Queue optimization" Then, when ready, click a button to start processing them. One should then also be able to choose to either process them sequentially or in parallel. This way one could set up multiple studies with varying parameters and set it to process over night.4. What is the use case for your organization?Shorter time to reach final solution.5. What business value would you
When I perform Edit Definition on the selected section of Creo model in Creo, Creo crash's"Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 16452."
Hello all, I am getting this error while trying to mesh in Creo flow 10.0.3. 'No valid surface selected for surfaces in property panel' Can anyone shine any light on what this means? I can't seem to find any settings that can progress me past this point. Thanks all,
Until now, as shown in the attached video it is possible to share several parts or assemblies from different owner in one owner only but not for in their owner...
Hi guys, I wanted to simulate a part we have build, its a flexure hinge (see pic 1 and 2). How it works: As one spread the two ligaments by the screw on the input-side, one will tilt the outputside as indicated by the orange lines. The input is in mm and the output in degree, respectively. as You can see in pic 3 the real-world model matches the mathematical (geometric) model very well, but if I try to simulate it by applying a force to spread the ligaments the values for the slope on outputside are far away from reality. Even more, when I plot output vs input of real-world data I get a parabolic curve, as expected, but when I plot the data from simulation I get a straight line!!! Why? Have someone a clue, whats going on here? -I use Creo 9.0, -For the simulation I applied several forces (100, 1000,2000...5000)N and measured the displacement (in Y direction) of the upper and lower ligament to have an equivalent for the input of the real-world-part which is in mm -and the displac
I have a line style question when I print out to PDF.On the B size format the part prints out with more dashes and dots. (see image)On the G size format the part prints out with less dashes and dots. (see image)Does anyone know how I can get the part on a G size sheet to look more like the part on the B size?The pen tables are the same, and the way I exported the drawing to PDFs are the exact same.This leads me to believe that the format is driving the way the part looks, sound right?Thanks in advance for your help.
First, can I use the VB API to export all sheets of a drawing to a 2D DXF? If yes, I can send over my code and go from there.
Using Creo Parametric 10.0.2.0 Commercial. I have created one quarter of a sketch that I want perfectly to my specifications. The other three quarters should simply be a copy and rotate of 90, 180, and 270 degrees of the first quarter. The final sketch should then just be joining them together in a circle to close the sketch. Then, I want to create the part by extruding this sketch. I successfully copy and paste my construction lines, my center point reference, and my actual lines.I successfully rotate it 90 degrees. The issue is, I can't get the end points to snap to each other to create a closed sketch! My sketch is essentially a 90 degree arc with radius of 62.5 mm, but the first part of the arc is removed for a slot that goes into the circle. I have tried clicking and dragging, but the point is the center point of the sketch which won't snap to where I need that center point to be. I tried setting the vertical and horizontal dimensions going from
Hi all,I'm struggling to find a solution to an apparently simple problem. I have a repeat region listing parts, whose indexes have been "fixed" to remain always #1 , #2 and #3 (in the desired order).Now, component #2 has been replaced with another part (different part number) and so the BoM table is now listing items #1 and #3 (associated to the same p/n as before), leaving a gap inbetween; the new item, which replaces #2 is now listed as #4 because it's the first available index. I thought I could simply fix index for the item which is now #4 and assign #2, but I get an error because index #2 is already assigned! But I can't unfix it, because it's not possible to select it (its row in the table does not exist anymore). Does anybody know how to work this around, without deleting and recreating the table? Thanks. (I simplified the example on purpose, but this scenario might apply also to assemblies with 100+ parts, where recreating the table from scratch is not an option)
I cannot seem to add a form with .designer.vb, .resx, and a .vb file to the VB API Examples project using, Microsoft Visual Studio Professional 2019 (2). Is there another tool used to build and import other forms? Am I using the wrong environment? Thank you,Cody
Dear PTC-Community, I have been stuck with a design challenge and come to you as my last resort of maybe finding a smarter solution to my problem. I'm using creo 9.0.3.0. I'm trying to put 0.6mm holes which are 1.2mm apart from each other trough a body that is "twisted" in space. (It is part of a fan blade)(view in My Videos) I want the holes to enter the part on one surface and exit on the opposing one. They need to follow the geometry, but the entry and exit surfaces are not parallel to one another. My best approach so far was to make a row of profiles on a plane perpendicular to the direction in one corner of the part and use the "Pattern" - "Curve" function, selecting one of the edges as the reference curve. I also choose the option "follow the surfaces", and select the entry and exit surface. I hope the following screenshots make my process more easy to follow. It's difficult to explain, what I want to archieve.Profiles on the top, following the top left edge o
I’m working on a project where I need to retrieve the view matrix or camera position from Creo using the API. Can anyone guide me on how to do this?Specifically, I’m looking to:1. Access the view matrix of a specific view.2. Obtain the camera (or eye) position for a given view.If you have any code examples, API functions, or documentation links that could help, I’d greatly appreciate it!Thank you. Creo 4.0 M150Toolkit C++
Hi, I've done a direction pattern with respect to the blue directions (of another object of the assembly) in the picture. With relations, I want to invert the direction of the pattern in relation to the constraint of the first object of the pattern. Wich is the command that I have to insert afther the if conditions in the following relations? Thanks a lot. Michele Barile
I am looking to be able to trim or cut a section of an imported facet feature in creo 10 and need help. I am looking to cut the surface section in purple from the blue faceted feature. Thank you.
I've been tasked to determine if it is possible to annotate (modify) our present UDFs to include annotations that will show up in an MBD model. Currently we can place the UDF, a counterbore hole, for example, on the model . However, then we must dimension the UDF manually in the combination state. Is there a way to attach the callout to a UDF so it becomes integral with the combination state?I suppose this would be applicable to a non-MBD part also. Can the callout be attached to the UDF when the UDF is placed on a part?Our UDFs are all Stand Alone also and we use Creo 9.3. Thanks for any guidance!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.