Recently active
Horizontal Center Leader dimension take extra space. And it is different direction from next dimension.
Currently "Minimize the Ribbon" work ALL or Nothing. We would like to use sometime but do not want to use in SKETCHER, etc.
We expect Printing Line Thickness is always relative and want to control only Pentabel(.pnt). For the Reduced Printing, Printing Line Thickness is determined by Drawing Size, Pentable(.pnt), Paper Size in Print Configulation Menu and Printer Setting.Want to avoid the usage of many number of PCF.
Currently, we need to delete Pattern, when we want to switch Simple Hole to Standard Hole or Standard Hole to Simple Hole.
When we create Vertical Balloon Note with multi line, the order become upsard. It is different from Balloon Property. We would like to show the same order.
Currently it is not possible to Change Reference for Draft Datum. We would like to change reference same as Leader Note.
Currently it is not possible to use Datum Plane of 3D model for Snapping References of drawing Sketch. We would like to use Datum Plane.
Currently it is not possible to use Center Line and Solid Edge of Solid Pipe Part for the reference of Auxiliary View's direction. We would like to use Solid Pipe Part for it.
I often work on very large models with many features. They are often created by other team members and can have questionable modeling techniques. So when I select a feature from the model tree for suppression and the message window pops-up informing me that the "Highlighted features will be SUPPRESSED. Please confirm." I always have to worry what dependent children were automatically selected for me. This means searching the model tree for the other features that were "software" selected or visually scanning the graphic window for unintended feature highlights. Both can be prone to error. The worst part is you could be looking for nothing if the original selection has no dependent children. Even when there is a single item in the collector, the message is still plural, as in "features". I'm never really confident that the software isn't doing something I don't intend.So I'd like to make this an improvement request:Please make the pop-up msg box have
Creo 2.0 - Offset Lines in exploded viewI've been doing explodes for many years and I have always wondered why?Why isn't there a "Redefine" option for an offset line that was working fine but is now broken because of a replaced component? I find the only choice here is to delete the old broken offset line and recreate it even if only one of the end attachment definitions is invalid.Why isn't there a "Pattern" option when creating offset lines - even if the only pattern type available is "Reference"? I often have a reference pattern of fasteners assembled to a pattern of holes all exploded off together. The only choice is to create each offset line individually when what I really want to do is to create the first one and pattern the rest following the reference.Why is it that the only place anywhere in the software that requires you to explicitly "save" after completing a redefine (soft) is at the end of an exploded view edit? Everywhere else when you complete a definition with an OK or
When a shrinkwrap is aborted, the status bar has feature regeneration failure and it takes a lot of work to find the erroneous sub assembly / part. No notification appear.
Actually is not possible to make zoom movement or change the point of view when an animation is executed: the point of view on the models is fixed. With rendering and advanced assembly is possible to create video movement but no zoom in or camera control are possible.This new functionality is important for all customer that do presentation of plant layouts and machinery and is important also for PTC VARS to best sell the module Advanced assembly.
Video Link : 6537
Want to get the possibility to set a new customised pdf profile file i.e. pdf_export.dop as default. The workaround to use mapkey for this is not sustainable for this.
Need the possibility to rename reference points with a "Properties" command in the floatting menu.Like we can do for an axis.The workaround is to use # Model Properties # Name # Change : heavy !Thanks
There should be an Option to retrieve only the simplified rep to the workspace
Give the priority to the selection of visible lines in section views.The option "select_hidden_edges_in_dwg" doesn’t work in section views. Video Link : 6548
We have written custom applications at our company using VB API. We'd like to run multiple releases of Pro/Engineer and Creo on the same machine with each of them using our custom applications. This can be done, but is a bit of a hassle.Here's the process. Pro/E WF4 needs registration of Visual Basic API COM server (pfclscom.exe) through vb_api_register.bat (<proe_loadpoint>\<datecode>\bin). When switching to run Creo 3.0 we need to first unregister Pro/E WF4 and then register Creo 3.0 using its own version of vb_api_register.bat (<creo_loadpoint>\<datecode>\Parametric\bin). Also, when going back into Pro/E, Creo gets un-registered and WF4 needs to be re-registered again. They cannot both be registered at the same time. One must first be unregistered for the other to work.I opened a call with PTC tech support asking if there is a way to have both CP3 and WF4 registered at the same time on the same machine? Here is
https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS218826&art_lang=en&posno=5&q=bolt%20circle&source=searchmake formatting the newly introduced bolt circles possible in default settingswould improve this handy functonalitykind regardsMet vriendelijke groet,Simone Manuputty.
Most QC starts by manually numbering drawing dimensions (with pen and paper). Our company wants to directly add balloons to dimensions in Creo so that vendors don't have different numbers than internal QC, and we don't have to track multiple documents. Creo should automatically create and place balloons for dimensions just like it does for assembly parts.
Please add the ability to edit the Load Set Description. You are able to type in the Description when you first define a new load set in Mechanica / Simulate but are prevented from editing it once the load set is defined. Thanks, Don Anderson
Many of us are designing (or even optimizing) designs to meet "least mass" for one reason or another. This is a royal pain when we use lumped masses... in particular when there are lumped masses and multiple model tree levels of our simulation assembly AND rely heavily on shell and beam models that have no inherent mass except through running a simulation.Currently the reported mass in the simulation report is the total mass of all beams, shells and lumped masses at all levels. This makes it royally painful and inefficient for me to report to my audience what the actual mass of my design structure is. I must carefully check every assembly and part to see if it has any lumped masses in it... and subtract those out of the mass value in the .rpt file.A system measure called something like: "Sum of Lumped Masses", if it existed, could be subtracted from the current "total mass" to arrive at the mass of the design I am working on.
Ideally this should be the default because if you have it set by mistake, it is easy to fix by using the "Unshare" command on all items that shouldn't be shares. If that option is off (like the default is now) by mistake, it is VERY DIFFICULT to fix this later-there isn't a good way to take a copy of a part and make it a share instead; the only option is to start over.
Currently the software (almost always) only calculates time 0 and time 1 when keeping the setting 'automatic time steps', while it is most often needed to have between 5 and 21 time steps for an accurate result. It would help the 'unexperienced' user when the time steps would indeed be automatically chosen based on the study definition; initial space between contact surfaces; small initial time step and when calculating finate friction; 21 time steps etc.
The ability to define C3 curve continuity across curve connections in Sketcher would be of particular usefulness when making Graph features that drive other features.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.