Recently active
If you making a hole with type - "diameter" you must to choose 2 fixion dimensions - diameter and angle. But if you need making it through the plane you must to enter value of angle - 0 degrees. It will be cool to have checkbox "Through". Please add it.
It would be nice if when you press on Print Preview, it actually shows you all lines and annotations in black on a white background (monochromatic), just like a real plot would turn out.We are currently using a black background in detail mode, and when we do a print preview, everything turns white and we lose all lines.
Now for changing mtl file of material in a model you must to click minimum 5 times (File -> Prepare->Model Properties->Change material->and after you have to find material and appoint it and after close a menu. It would be nice to change mtl file from model tree (like in SolidWorks, but may be it protected by patent; or like in Creo Simulate) in one click.
For current functionality,there are the following restrictions about ordinate dimensions:) An ordinate dimension must be in the same view as its baseline.2) An ordinate dimension in a clipped view (such as a detailed view) must (in extension) intersect the view boundary.• If all the references of ordinate dimensions (based on same baseline) exists on detailed view, user can move all ordinate dimensions with baseline to detailed view together.• If some references of ordinate dimensions are not present in detailed view, user cannot move ANY ordinate dimensions using one baseline to detailed view• So if there are a lots of ordinate dimensions referring to one same baseline, user cannot move some specific ordinate dimensions to detailed view only.Refer to https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS216987&lang=en_US for detail.Please remove these restriction in the future version. Allow to move some specific ordinate dimensions to detailed view excluding baseline.
Sometimes you need to change "chamfer" to "round" or backward. Only one way to do it - delete existing feature and make new. Probably it will be nice to have one feature instead two and at any time to switch between the functions. I think it possible to merge both function.
As in the style tool, it is sometimes necessary see the changes in the 4 view layout, while dragging or performing a dynamic edit operation (dragging a dimension for example).
Today if you need to make an isometric view at the drawing you can use two ways:1 - make general view and rotate it (enter value of angle rotations - horizontal and vertical) in properties of view;2 - make orientation in a model, save it and use in a drawing.Both of way are non comfortable and long.It will be cool to make an isometric view like projection view from any view, but keep the mouse (not to the right or to the left) to diagonal (angle) moving.
There are a lot of features that used to be taboo to model because they were not useful, took too much time and used too much processing & graphics power in large models. However, with 3D printing technologies rapidly emerging, many of these features such as threads, text, etc. are necessary to making a good print.Unfortunately, PTC has failed to keep up with the industry and their tools are klunky, time consuming or just flat out won't work. For threads, the process is ridiculously complex and has limited options. For 3D text, if it's not on a flat plane, it cannot be extruded without an incredible amount of effort and workarounds.Creo 3.0 has some updates that are not useful because the 3D printer software already does everything that PTC has added. PTC, please update current Creo features to keep up with 3D printing technology.How to Extrude Wrapped Textproject tool in sketch, there has to be a better way!Convert projected / intersected curve into any curve typ
Nous aimerions une fonction permettant de matérialiser un point ou un sommet servant à la création d'une cote dans un plan
It should be possible to copy multiple workplanes or WP - sets in one step. At the moment you get the error message : Single selection is required . A possible workaround for you would be to create an assembly and put the workplanes in the assembly. Then copy that assembly (be sure to copy all levels) and move it. You can then remove the workplanes from the assemblies, but you will have to rename them due to the naming conflict. But this workaround needs to many steps . Creating assembly, renaming the workplanes ... . It is possible to copy several parts or assemblies, because of that it should be possible with workplanes and WP Sets , too.
Over the last few years, it appears that PTC has made an effort to allow for spaces in config options that use file paths. However, there are still a few that will not work. For instance, gpostpp_dir. It is possible the other config options in the same module won't work either, but this was the one we tested. Please go through ALL config options and allow for this to work.Thank you.
Geometric Tolerances with leader pointing to the witness line of a vertical orientated dimension should be able to have a vertical oriented text. Meaning; text in line with dimension arrow, no jog.Could be a subcategory of placement in Dimension, instead of 'under dimension' or 'under value' the new one 'next to dimension' Attached an image of the current (wrong) view.
We need to have “structured tetra mesh” all across the curve/length of weld. Secondary, we also need the similar mesh on periphery as well. This is required for structural weld calculations. Attached is more insight.
Back in Pro/E, it was easy to make a rendered picture to put in a document. As the Backgrund by default was white.The quality of this often did not need to be high, but just remove all datum (base) plan and cosmetic skecth and make the part look smooth.Know that the Background color is black, you can not just copy it over too an document, but need to use time setting up an scene and ligtning.Also the back color ofent make it harder to see the parts/details comparede to the white backgrund.
Hi All,After Applying a Cutting/Capping surface in the result window, there is no way to hide the grey edges.N.B : this Idea was requested by Mr. Jonathan DyerRegards,Ali
I have a suggestion to be able to for example, right click, on a file name in "open -> recent files" drop out from the "file -> open" and allow the user to open a representation/simplified representation from there. The list only shows the main assembly/master representation of what was worked on, not the representations that may be available. This would save a lot of time.
I'm user of Creo elements Direct 3D access.I work in the management area and use this great software as a viewer for presentations and to the preparation of documentation (screenshots).I do not use it to construct.I'm fine with it until on 3 points which particularly bother me: 1. Edit the ColorsThis is unfortunately not possible.With the workaround of using the rendering engine this is possible, but very cumbersome and very limited. I would like to adjust colors.2. Set facet precisionAccording to how the creator of the model has set the accuracy of round components appear facet precision round or like a polygon.Screenshots for documentations are ugly with low set of facet accuracy.I would like to adjust the facet accuracy.3. tree list edit The tree list can be edited only very limited.Only the loading of additional data and delete individual items is possible.The nomenclature is often lost when importing from another CAD systems.I would like to edit the labels and the structure list h
Chamfers: when you measure a O X O and / or a O1 X O2 chamfer, the result dosen't correspond to the shown dimension.The default "Offset Surfaces" type of value is not useful for construction.Please add a config.pro option to choose "Tangent Distance" by default.PTC suggests defining a mapkey to not use the default “Offset Surfaces”: article CS53776« Advanced Chamfer Topics » explains how these chamfers are defined.
The attached document describes the case, which basically means that part annotations were using dimensions from a separate sketch (created as a separate feature in the model tree), and that makes it impossible to hide that sketch on the drawing without the also the geometric tolerances made as annotation also gets to be hidden (The annotation geometric tolerance uses a size dimension from the sketch).Creo 2 M130 is used.At the part the sketch feature can easily be hidden and the geometric annotation tolerance still shown, it is only at the drawing the issue appears (Hide/Unhide and all kinds of layers have been tested.)There is another PTC support case about a similar thing from May 2015, also in Creo 2. The two suggested workarounds are really NO GOD for me, and really no options for what I try to achieve.See attached document. (Unfortunately no part and drawing can be shared) BRMartin
Now for hide component of subassembly in top assembly you have to use layers or simplified representation. If you try to hide component of subassembly by button "hide" (RMB) in the tree of top assembly it will hide component in subassembly and it is so inconveniently. It will be cool to have two buttons - "hide in assembly level" and just "hide" (in subassembly level).
Sometimes you need to split subassembly in top assembly to separate parts with (or without) saving references to each other, but now it impossible to do in Creo. You can do opposite - make a subassembly in top assembly (combine separate parts). It will be cool to have button (RMB) - "Split subassembly" in top assembly level.
i would like to be able to use an exploded state of a sub-assembly in an upper assembly. rather than to re-explode the sub-assembly in the upper assembly. some times we have one drawing for multiple subs and show all of them in the exploded state. i looked on forums and tech support and this is not available now.
I would like that the global interference check had a threshold for it to display only interferences that have a volume of interference larger than a number I could specify. This way I do not get too many tiny interferences. I do not care for thread interferences of bolts and screws.
Now ribbon color in Creo 3.0 is white and very washy. In the end of the work day you feel that your eyes are absolutely tired and blinded. Creo 3.0 must to have possibility to change ribbon color. I think It is so easy to add in program, please give it to us!
Add the ability to rename a parameter.This is something that I consistently wish for please.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.