Recently active
For the Creo drawing BOM.The BOM level should be automatically adjusted according to a size A3, A4 etc. , If needed move to the next page.Is it possible?
Tried placing Decals on models...they must be invisible? Went thru the prompts, searched in the HELP section, did the Mapping Shape and wore my tin-foil hat for a bit...???!!! It's on a flat surface and the model is brought in as a STEP file? Screenshots show the application of the decal...invisible.
Hi,We are working on chassis design for off-road vehicles and we have very large assembly files. (Approx 10.000 parts) I am working on projects by excluding or including components but sometimes it takes time to process easy tasks. Our computers are workstations and they are very good but in very large assemblies it does not help. I know some ways to do but it didn't help much.Is there possible ways to increase performance? Thanks in advance -Enes
Hello Folks, I am using Creo 7.0 and partial or detail view generates as full view in pdf file when working online (windchill connected). But when I generate pdf file offline (with standalone creo / offline) same view remains as is as they are in creo drawing.I wonder if anybody faced this issue. Any help is appreciated!! Regards,Mani
Hi all, when processing a save as of a creo parametric assembly in whindchill, I would like to include the illustration work.Unfortunately creo illustrate file is not embedded. what is your workarround whith for this use case? Mine is to save in local the c3di, break the link to the source, reconnect windchill and reconnect to the new published PVZ...
Hi everyone, I am having an issue with fixing parts in Creo Parametric 6.0. We are a team which works on chassis manufacturing and we have a lot of parts in our assembly files. Sometimes we have some reference issues and we have to delete all constraints and fix all parts in assembly. I created a mapkey for this but it just does one part with one keytap. So we need to fix all the parts but faster. We are using Windchill PLM by the way. (If you need this information.) Thanks in advance for the help!
On the Creo 2D drawing, For the Sheetmetal fabrication BOM table, is it possible to show weight of each component and total final weight?
Hello Everyone, We are working on an assembly having lots of sublevels. While creating some relations , when try to "Insert" -> "From List" , it shows the error message "Requested filtered table exceeds the number of allowed rows.Re-edit the filter or cancel." Please help me to solve this issue. Regards
While creating a 2D drawing, how to achieve to have a default automated center line for oblong rectangle or hexagon
Creo Elements Direct Express won't open. Get the One Time Activation dialogue box then the proxy server dialogue box, then the request license dialogue box. Get the 72 hour activation code and enter it and it says it is invalid. Anyone else having this issue?? Thanks,
So a drawing that has been in our system for sometime has suddenly lost all the views on each sheet of the drawings. the views still appear on the drawing tree but on the page no view can be seen including dimensions and balloons.
Currently flexible components can only be regenerated on specific positions but not during a mechanism animation. The desired functionality is to regenerate the shape of the flexible components at each frame of the animation sequence. This functionality exists in Solidworks & NX.
Is it possible to create a custom hole file (.hol) for holes that are only drilled, not tapped? I'm trying to recreate a standard drill chart with our standard countersink sizes and hole callouts. For the life of me I cannot figure out if Creo will allow me to do this. I have a number of custom threaded hole files but this one is an enigma. What I have so far is attached. When I go to select a size from it, I just get a -1.000 for the diameter. Remove the .txt if using the file. Thanks..
How to add user desired symbols like Half moon Topic posted from under the tips section - https://community.ptc.com/t5/Creo-Parametric-Tips/How-to-Add-New-Symbols-to-the-Text-Symbol-Palette-in-Creo/ta-p/821114.
Long ago when I created UDFs for various holes, I could put the corresponding tolerance with the hole. When I showed my dimensions in the drawing, tolerances came over. I'm creating some new .hol files now but can't seem to figure out where to include any hole tolerance. Ex: If I pick a .250 dia hole from the dropdown, what I'd like to see in the model is .250 +.005 / -.001. Obviously I can add a tolerance later, but having it stored would help standardize things for our users Creo 8.0.0.0 Thanks..
In the drawing of Creo Parametric 7.0.0.0 it is not possible to create automatic balloons based on a table with a repeat region associated to a multibody part. The buttons of the menu “Create Balloons”, in the Table tab, work only with a BOM table of an assembly. It is of paramount importance to enable the use of automatic balloons with multibody tables, like the ones already added to the Quick Tables button.
1. Describe the ProblemTo add a feature inside the sketcher, similar to AutoCAD "Match Properties" https://www.youtube.com/watch?v=kDnNqw2hHSA 2. Are you using a workaround?no3. What is the use case for your organization?If you use different line colors or line styles inside the same sketch, you could change styles faster than know4. What impact does this problem currently have on your organization?All users.
Hello dear Community,I am a student having worked with Autodesk Inventor for a while but i am switching for a future employment.When trying to make a threaded hole i select ISO as the thread type and M20x2.5 as the size but then it spits out sizes like 0.6890 for the inner hole diameter wich is propably in inches, but since everything is set to mm it tries to make a hole for the thread thats just 0.689mm in size.Screenshot is attached aswell i couldnt find any solution via google / this forum but maybe i was just blind, if you could give me an answer or point me to an already existing Answer i would greatly appreciate it.Software: Creo Parametric Education Edition (Version 10 i belive)
I recently made some CDF-Live Simulations and thought that the particle animation is really slow.It turns out, when dragging or rotating the part the animation is fluid.GPU = 3080 ti also happens with 2070 Super, and 1660 TI MobileDrivers - Newest and i also tried the latest WHQL driversWin 10 and 11 I checked the Monitor and found that Creo (once the object stands still) lowers the refresh rate to about 3-5 FPS, (usually wanted) , but it also happened when a particle animation is running. When dragging the model the refresh rate jumps to the usual 250+ and the animation is smooth. I attached a short Video demonstrating the effect (sorry for the music and outro, i tried some presets)I searched quite some time for a config Option, but i didn't find much related to refresh rate or CFD-Live.The few Commands i found didn't solve the issueMFG Raimund
I was wondering if the Creo View BOM read in parameters from creo parametric (version 10) assemblies and part files, so that the names, item descriptions e.t.c would match. As well as that I was wondering whether the BOM lists matched in terms of the ordering of items/parts, so that the parts appear in the same order in both Creo View BOM and Creo Parametric BOM.
Hello all, I am trying to assign apperance to creo assembly or part using toolkit. Can someone let me know how can I assign apperance and also define the RGB value for appearance? TIA
I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.5.1Need PTC support to change IE browser type into other browser before IE retirement
Hi,I'm using Creo Parametric 6.0.5.1.Is it possible to have different system colors for modelling and drawing environment?In modelling environment, when I enable a section view, the contour lines of the part in the section plane are yellow. I can change this in options -> System appearance -> Letter, but then all text, dimensions and tables in the drawing environment are changed as well. I would like to have different "letter" color for the modelling and drafting environments. Is this possible, or is there another way? My workaround is to have mapkeys to quickly change the letter color to black and yellow, but it feels kind of impractical. Thanks in advance.K
Hi fellowsWe are using Creo Parametrics 8.xxx, Standard configuration metric, ISO. And we are creating our own tables for company standard holes. Question:Is there an option, to feed the hole feature with values out of the tables, to show a fractional number instead of a decimal number.Example:Rp 1/8 is the pipe thread 1/8" for holes with inner threads, If I select this threaded hole from the table in the dimension text menu it looks like: In the existing tables the value 9.73 is included and presented in the model or drawing with prefix Ø.The value 9.73 is the correct dimension, but I like to show the value 1/8 because this represents in combination with the prefix the right size of the threading tool .In the same time, the Prefix Rp should be written automatically to the prefix field of the hole feature's menu. Same as Ø for standard holes or M for ISO threads.Up to now we made this work around: But I don't like to manually entering such text into the dimension text me
I'm trying to roll Creo View out to some pople within our company but don't want to without getting a few things ironed out. One being the publisher. Why does every job with the publisher fail! Has anyone got a way around this? Number 2 see attached, CYS and planes show up when opening Creo View out of both Windchill and ThingWorx. Anyone have a solution for this?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.