Recently active
Is there a way to add tolerances or limits to hole notes via the hole file? Or have it show on the drawing after adjusting the tolerance to the feature within creo? For example, I am using &TAP_DEC to call out the decimal value of the tap drill diameter. The value is .397 but has a range from .396-.401. No matter what I do, I can't seem to have the hole note generate a given tolerance or limit. I've gone into the model and added the tolerance/limit and it doesn't regenerate the note with the new value. Anyone have a work around to this?
Hello Dear Friends at PTC Community, What is the industry practice regarding level of details for MBD parts? Should ALL features have ALL dimensions shown, in as many Combination Views as necessary (same level of detailing as in 2D drawing)? Is there a way to hide a model in Combination View? Some of our Combination Views are packed with notes and models are not necessary (they get in the way actually).Simplified Representation works within assemblies, but not at part level. any chance someone here can share a good practice/high standard reference model, something I can learn from?
I am using the Creo 10 cable and harness application and hoping to find a solution to creating a flat and flexible ground strap. I've seen some electrical modeled assembly drawings that show flexible ground strap concepts, and I'd like to create the same effect. It does not need to show the fancy woven details from the manufacturing process, just a flat and flexible feature that I can assign its path with the "Location" section while connecting at terminal lugs at each end. Regards, Chas.
I am using Creo Parametric Release 6.0 and Datecode6.0.1.0Closing Creo with an error message :Unable to communicate with the display driver. the application must close.Here are the errors that I facedUnable to communicate with the display driver.error code : 2
1. Describe the ProblemHi, I am planning to use Creo 3d model to embed in website design, need Suitable formats like GLB and USDZ. Need direct export options from 3d and also from the AR model generated. 2. Are you using a workaround?Trying to use step file to convert the files in other software but didn’t like the compatibility of it as it looses the environment setups etc3. What is the use case for your organization?It will be a helpful option in future for many industries4. What impact does this problem currently have on your organization?Not impacted at the moment but can added better user experience
1. Describe the Problem I am working in a software company. Our customer wants information about the semantic surface finish; however, we do not have sufficient APIs for it. We request the addition of APIs for surface finish information, such as MATERIAL and LAY_AND_ORIENTATION. All the properties we need can be set via the UI in the attached image. 2. Are you using a workaround?We are now using ProSurffinishValueGet(). However, it can get only double value set as roughness_height, which is defined in .sym file.3. What is the use case for your organization?convert to our file format.4. What impact does this problem currently have on your organization?We are unable to save sufficient information in our formatted files.
1. Describe the ProblemWhen a drawing of a harness is made and views need to be BROKEN VIEWS, the cables shown will not be solid. This is what creo looks like while setting up the broken view and this is what it looks like when complete. (no solid break)we would like to see them treated like solids that have edges. 2. Are you using a workaround?no not at this time, but you can manually sketch some lines and relate them to the view.3. What is the use case for your organization?creating harness drawings that are really long are truncated4. What impact does this problem currently have on your organization?minor issue but starting to get pushback from manufacturing.
I just installed Creo 10.0.5.0 (from 8.0.10.0 and 9.0.9.0) and am noticing that on each launch Windchill is offline unless I manually go to Server Management and uncheck the "Offline" box. All of the settings from 8.0.10.0 and 9.0.9.0 are unchanged and neither one of those versions had that issue. What do I need to do to have it start with Windchill online?
There was a time in which skeleton model could not be a family table; now it is possible, but why flexibility (very similar to a family table "on the fly") is not ? Not possible to define or predefine a Flexibility for Skeleton Models If a skeleton model is opened, access to >File >Prepare >Model Properties >Tools >Flexible mentions: the information is not available If right click is done on a skeleton model in an assembly, drop down menu does not give access to Make Flexible capabilityA workaround could be using a regular part as a skeleton model (in the past it was a common workaround to bypass the fact that family table function wasn't available for skeleton models); I don't know the reason for such limitation. I would use it to manage different assembly configurations without the need to create (and manage in Windchill) any instance and/or WTPart.This function will reduce the time spent in ma
When a new IFX fastener is created, a window for pattern (single instance / all instances) and the hole control (no hole / hole in part level / hole in assembly level) shows up (see image) Is it possible to bring up this window on existing fastener, and edit it? Or would the fastener have to be deleted and a new one created in order to get this window again?
Hi all,I found Creo schematics software yesterday, and I think it would suit my needs but I would like to ask a few questions, if some members of the community has encountered the case already. At my company we use to draw harness layout drawing (all connected harnesses of the project) on a single sheet. I believe this can be done using circuit diagram.In our harnesses, we are using ferrules and mark tube (on which we print wire label) because harnesses are connected to terminal blocks.My questions:Is it possible to define ferrules and mark tubes when creatins harnesses? Is it a built-in function or can we develop it by ourselves?Is there any terminal blocks templates already? Thank in advance.Nicolas
I am using Creo Simulate Release 4.0 and DatecodeM150we are tryin to RUN Static Structual Contact analysis, it is running form 48hrs still, Run is not completed, want to know how to optimise and know the issue, how to resolve itHere are the errors that I faced(loosening gap stiffness to improvrconvergence)
it would be great if you can do the translation directly in illustrate and don't have to export a zip, open it with notepad++, translate it and then import again. customers mention this over and over again
基板CAD Allegro PCB Designeでパターン設計をしているデータをCreo View(以下CVと略)データ(.edaデータ)に変換したところ,ネガで設計したクリアランスやサーマル接続部が欠落し接続の有無が判別できなくなります。 データが欠落しないようCreoViewの改修をお願いします。 本件は、ケース番号 15354546 で対応いただいているものですが、 貴社サポートサービス担当者より、製品のアイデア(エンハンスメントリクエスト)に投稿するよう勧められ、 記載します。 以上
According to PTC support Creo does not allow to display 2D representations of datum coordinate systems to conform to ISO 5459. Creo does not mark the CS origin of coordinate systems with one axis normal to the sheet/screen with extensions of the axes and a circle. For ISO conformance it is also necessary to be able to rename the axes (X1, X2, ...) (section 7.9 in the standard). It should also be possible to place the CS tag (possibly via show/hide annotations). The Creo (3D) coordinate systems already looks very similar to the 3D representation of datum coordinate systems in ISO 5459. The suggested improvements regarding the axes naming and CS tag placement apply to 3D coordinate systems also.
It would be great if there was a ModelCheck check that would catch the presence of unattached features. It would be great if this check could catch unattached solid features and sketch/surface features. For example we have a specific problem in MBD models where we create designated areas on a surface, that surface then has draft applied to it and the designated area is no longer "on" the surface. This can be hard to detect visually and having a check for it would be very helpful.
The new ModelCheck GUI in Creo 5+ is a nice enhancement over the previous GUI. However, by default not all info is display to users automatically which wastes time / creates extra clicks. There is a hidden config_init.mc setting MC_REPORT_SHOW_ALL_TAB that solves this problem. Please make this setting not hidden and consider making the default yes to use the helpful 'All' tab. See images below. Current: With hidden config_init.mc setting: MC_REPORT_SHOW_ALL_TAB YN Y Y Y Y
Apparently, if there is a shaded view in a drawing, and you generate a dxf, the shaded views are exported as images that the dxf uses. However, if you have windchill and are using the cadworker to generate the dxfs, those image files are not available to download with the dxf. Therefore, we need some way to check for shaded views in drawings before they are released and the cad worker generates dxfs. Thanks!
Actual functionality of SHEET_SIZE_INFO (Sheet Size Information) lists the number of sheets in the drawing and their respective sizes. We have a need to identify if different format sizes are used in the drawing to keep consistence with some of our internal processes that require that all sheet size are the same. Either to modify the current check SHEET_SIZE_INFO or to create a new one that mark an Error or Warning if different size sheets are used in the same drawing.
When you change the size of a drawing from A4 to A3 for instance, it could be useful to be able to move all the drawing views together within the drawing sheet: Thank you very much
Hello my dear brothers and sisters, Can you please bring the enhancement of opening part/assembly linked drawing from part/assembly model directly without finding it in the working directory. I hope it will give benefits to every customer
Hello my dear brothers and sisters, Is there any chance to bring the hole feature enhancement in future. like 1)we can create multiple hole in single command 2)call out note should be match to the counter bore and counter sink profile along with that its parameter should be added to the hole feature so that we can save the space in drawing sheet.
Insert a line in config.pro to automatically check the "Make Feature Dependent" when inserting a UDF.
Add a check in Modelcheck that can flag assembly hole or cut features that do not intersect any parts in the assembly. This would enables users to get control of one of the worst sources of slow assembly retrieval.
I would like to be able to freeze the equipment built (I wish it would become no- more parametric) and that will only be modified in some details that the parametricity of creo could damage. Does anyone have any idea how to fix it? also I would like to use sketch as autocad implicitly (sometimes we draw difficult section to estrude) thanks to all
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.