Recently active
Currently not able to copy points (multiple points in one feature) that are set as datum targets from one model to another and maintain the same naming scheme in target model copying to.You are unable to show the set datum target or create a new one without getting the error message "Point has been set, try again."For instance say you want to transfer the points from the machine model to the casting model or the other way around.The points do copy over but lose their original names and do not display as set datum targets in the destination model.or make it so set datum target points may be used in higher level models.
Is there a Creo Elements/Direct Interface for Unigraphics NX Plugin for NX 9.0 and 10.0?The plugin 8.5 does not work with NX9.0PTC is lagging behind with this translator.Current NX version is 10.0.
In the Module Notebook in Creo 2.0 (formerly called Layout), it is only possible with workflows (eg Mapkeys) to regenerate relations. I want to have the same function as in all other modules and to be able to regenerate the relationship with an icon. Also a shortcut key such as <Ctrl> <g> would be helpful.
Taper features can be very useful, but are a bit difficult to create and use. A few improvements could help.First, the text in the Taper dialog should say "Keep as Feature" instead of just "Keep as Feat"-there is plenty of room.Second, it should be possible to modify a taper feature by right-clicking on it in the Structure Browser, or by pre-selecting a face in the taper feature and having modify and remove options on a mini-toolbar (similar to what can be done with faceset features).There should be two "remove taper feature" options: one to remove the feature definition (and keep the geometry), the other to untaper the faces and then remove the feature definition (similar to custom features).And, in addition to being to modify or remove a taper feature, there should be a command to "suppress" the taper (which you can do now by unchecking the box in front of the draft angle).
Would like to extend the 'Outline' View calculation option to be able to be part specific. i.e. make this view Outline only except this part. Similar to Secure parts or Managed views.
3MF | 3MF Specification3MF is a new 3D printing format that will allow design applications to send full-fidelity 3D models to a mix of other applications, platforms, services and printers.3MF is an XML-based data format – human-readable compressed XML — that includes definitions for data related to 3D manufacturing, including third-party extensibility for custom data.The code to read or write 3MF is available as open source: Microsoft’s donated code reads STL/OBJ/3MF, writes 3MF, and can use Web Services for model repair.The 3MF format is designed to be an additive manufacturing format, with the complete model information contained within a single archive: mesh, textures, materials, colors and print ticket. 3MF provides a clear definition of manifoldness — open source code available for rapid validation and there is no ambiguity for models with self-intersections.
You used to be able to right click and choose "pause" during show and erase which would allow you to pull dimensions or annotations out of the way so you could pick the ones you wanted. According to PTC Case # 12538105:"I have just received confirmation from Product Management that the new Show Model Annotations functionality does not have a Pause capability. It was not forgotten, it was removed."This functionality also used to allow you to use the search tool to find a specific dimension if you knew the variable name (ie d123).
Currently, Manage Parts only allows you to choose what parts are visible in an assembly. This would also be very useful to apply to parts in the situation where you’ve got a part that you want modeled in the as-used state, but need to document the as-manufactured state. For example a piece of tape that is die cut, but drapes over the top of another part. The model that is in the main assy would be the tape in the shape of the parts underneath, under that model would be a container, in the container would be the as-manufactured model that is used in the drawing. Sample structure: MainAssy - TapeInPlace - MfgContainer - TapeAsManufactured - ViewSet
Soft/flexable parts, such as fabric covers, can take on different shapes when assembled. Currently, to display a simplified rep in an assembly, every layer of the model with the simplified part in it needs to have a simplified rep because the master rep always displays the master rep of all parts and assemblies in it.Allowing the simplified rep to be set for the master rep when assembling parts into a model would allow the same model to be used for all variations of the final form.
Actually ther are many empty layer into the view off all komponent layers of bigger assemblies.The layer idea only effecivly used for work when there ar only layers are stored in the models that have any object reference realy. Only "standard layer" "hidden items" can not be deleted.
In Windchill PDMLink 10.1 M040, Units of measure changes in an Assembly with a Bulk Item component created in Creo 2 M100 from gallon to cubic meters, this is affecting us big time. Logged call with TS C12540519 where in they communicated that a SPR is already been logged but PTC has no intention to fix even in 10.2, they asked me to log a call in Create Product Idea.@@
under a view there always appears a label. there is a default setting that says 'No Label' and then the text is not displayed, but there always remains a vertex.to get rid of this vertex, i use the hide command.it would be great if there would be an extra option in the default settings to set these view labels hidden by default.
In Creo Elements/Direct Modeling it is possible to use the tab key to change the context when selecting items between only the objects that are completely within the box and objects that are completely or partially within the box.In Creo Elements/Direct 3D Access the tab key does not have this functionality.As 3D Access is generally used by persons with a limited command of the program, it is not acceptable to expect them to change the context in the settings menu before performing the selection (and then resetting it again afterwards!).The tab key should receive the same functionality that it has in Modeling.
Several tongues at a sheet metal already bent are to be created. The mitres for the tongues are created automatically. (see picture, red lines) Kind regards amIn deutsch: Es sollen von einem gebogenen Teil automatisch die Laschen erstellt werden. Die Gehrungen sollten wie im Bild bei den roten Strichen erfolgen. Die Abstände bei den Gehrungen sollten kleinstmöglich sein. Gruss am
Would like the ability to copy a used defined custom feature to other parts. Current workaround is to copy & paste the faces and then redefine the feature.
ProMechModel is Creo Simulate geometry model which is used for CAE simulation.Hence I expect edge should be created where two surfaces interferes. This will help us to create conforming mesh across edge where two surfaces interferes if edge gets created. In other words mesh will preserve that edge. I have attachedwhere bolt surface interferes with plate surface and edge do not get created where interference occur.
I should be good (both time and mistake reductions) to get automatically the M16 annotation symbol in stead of the diameter 16 symbol when pushing "Show Model Annotations" in the drawing for the hole with thread. Please see model, drawing and print screens in the zip.
We would like to apply a thread the full length of a bar. Current Machine features do not seem to allow this? The bar can be threaded and milled to remove material, but this invalidates the feature.
When API ProMechmodelGet fails to create ProMechModel from ProSolid model then it just return general error. It is difficult to get any additional information about issues in ProSolid or native CAD model. It is very much helpful and desirable if this API returns additional information about an error like pointing to items in assembly because of which ProMechModel creation has been failed.
Add repeat region family table function with the prt simplified representation to replace Family Tables with prt simplified representation
Creo should remember the units that the first default constraint item has eg. mm and then when a component is being added Creo should flag up a message saying that this model is not the same units, do you want to change it? This would stop many problems including the datum planes going gigantic.
Allow feature redefine in drawing mode. Why open a new window for the part to redefine a feature? Use case: just want to drag a geometry element in a sketch to a new location. I don't really care about the accuracy of the location just somewhere that looks good in the drawing. Currently either have to open part & redefine feature or calculate new dimension values, edit the values in drawing & regenerate the model.
In creating a chamfered hole for a flat head screw, I set the diameter of the chamfer, then I noted that it was a free fit not a close fit thru hole. When I switched this, the diameter of the chamfer changed. Since I had already changed this away from the default value, it shouldn't have updated, but stayed the same.Changed the diameter of the chamfer.Changed from close fit to free fit and the diameter of the chamfer changes back to .507.Remember to change the diameter of the chamfer that had been already set.Thanks, Dale
Currently there is no means by which to save lengthy data (which includes carriage returns for formatting) as a Note type parameter in a drawing.I understand there is a workaround for pointing a drawing parameter to a model note, but this sort of rigging is not straightforward and is a lot of extra work.My company uses three CAD programs in addition to Creo, which can all do this, but not Creo....yet.We want to use the Note file attribute type for lengthy material, finish and process requirements specified on the drawing (which often have a long list of alternates and/or processing steps) so that we do not have to change the model also if/when these requirements change.
Setting hidden config.pro option Trochoid_Milling yes can enable Trochoid option in 3 axis trajectory milling only. Please add new one single milling for Trochoidal in Creo ParametricAbout Trochoidal Milling, please refer to Trochoidal Milling - GARANT TPC Mills | Hoffmann Group for detail
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.