Recently active
It will be nice to have for example in the System Colors options on Graphics item, the possibility to define a color for 3D & 2D dimensions.BRLuis
Similar to Layout and assembly component replacement it would be nice if this technique could be extended to UDF. Would like the ability to easily swap out different forms without having to delete and re-add.
Currently, the message "Material XXXX was assigned to the part" will appear whenever an instance has a different PTC_MATERIAL parameter than the generic. This is VERY problematic with hardware. Lets say the generic screw has a PTC_MATERIAL of Bronze and 40 of the instances have a PTC_MATERIAL of steel, every time any of those instances are opened the warning message will appear. This becomes very troublesome in large assemblies with many hardware components. When opening the assembly, hundreds of these messages will be displayed, hiding many of the important errors/messages that you are trying to read. This message should not be displayed in this scenario, where there is really no material change occurring in these instances. Original case number was 11867056, where these messages would appear every time there was a regeneration. The problem still persists when opening the assembly model.
Do you also have this problem:When selecting print, the preview (bugged) opens, but the ribbon does not.You have to click on the ribbon to get the right ribbon.also, the drawing is badly placed, but it is printed correct.after printing and closing, the ribbon again does not refresh.you have to click at any ribbon to go back. otherwise the rest of the ui (workspace) behaves as if freezed...(Creo 3.0 M10 upwards)anybody has the same problem and waits for PTC to solve this?They talk all about solutions and experiencing all kind of stuff, i experience alltime and allday frustration when i use this Crapduct.
When an assembly simplified rep uses a preexisting user defined rep of a lower assembly/part, the hidden associativity with the model tree no longer exists. According to R&D this is a known limitation. For example (see attached parts).top_assy_simprep.asm has a simplified rep called TEST. This simplified rep calls out a user defined rep for a part within a subassembly of this assembly. The cutout just disappears. Once this rep is active, there is a disconnect between the geometry window and the model tree. Hiding the components in the model tree does not hide the items in the geometry window and visa verse. The problem with this is if you hide the part in the geometry window, there is no easy way to unhide it in the simplified rep! The Model Tree shows it unhidden, but you can't seem to get it back! Yes, I can do VIEW>VISIBILITY>UNHIDE ALL, but I may not want everything unhidden - just that one item. The original PTC Case for this is 11879876. This seems like a HUGE oversight
Apparently, according to R&D, it is a known limitation that you can't drag a shrinkwrap feature up or down a model tree to reorder it. This is a little absurd. The original ticket number is 12077763. They say they 'may' put this in a later release of Creo3. However, to me, reordering features is a basic functionality that should be fixed if broken.
While drafting plastic parts, it would be great to use even a curved surface as a hinge for drafts. This would allow for more surfaces to be drafted at once instead of one at a time for those surfaces that share the same edges.For example, if the 'base' of this plastic part has a bubble effect and is curved a bit, all surfaces coming up from this surface can't be drafted using this bubbled surface. Instead, the hinge has to be the edges that meet the surface, which slow down the process drastically.
I'm repeatedly having issues where Reference Pattern won't work when the source pattern is directional. Either the pattern members don't rotate or translate, even though they are created. They will just stay on top of each other.See attached for 2 examples (open the assemblies for each one).Case: 12390403SPR: 2256458
When creating a sketch, Creo asks for references up front (or assumes them for you). If you do not select any or enough, you get a Missing References prompt:However, there's no reason that you cannot sketch first and then align to references later. Also, the "project" and "offset" tools don't require references ahead of time. The prompt at the start simply slows the user down.This prompt should me invoked only if the user attempts to exit the sketch without the proper references selected and not at initial sketch creation.
Publish geom features cannot be hidden - either by layer or by the hide command - and having them present makes selecting anything difficult. In fact, they are the first things in the section list. Rarely do I need to select a publish geom when working on a model, but I have to RMB toggle past them to do any work.Please let us layer them off and hide them so we can get our work done.
Create a rule to allow the filter of Graphic Rep component from Repeat Region. This will create an easy way to exclude for BOM components that are in Simp Rep just for display.
Create a means in search tool to find/exclude components that have mechanism constraints. Usage: I currently use a search query to find all components/features in assembly that are basically not regenerated. However when using mechanism constraints that are fully defined to only allow desired movement the status shows as "Packaged". These components show up in my search query that is a indication to me that something is probably wrong. I must spend time evaluating each case.
It is not good enough when we created ordinate dimensions with 2d drawing. Because Creo drawing cannot automatically add minus("-") with ordinate dimension when Origin locates at right side or upper side. We have to manually added "-" as prefix.Hope 2D drawing have this kind of function.
I am not able to check in Chinese CAD Model into Windchill which is in Chinese language
If a trail file is created to view post processing results in analysis,the results display window cannot animate on its own through trail file .We have to manually press play button to start this animation.This seems limitation in Creo.
extrude solid feature, you sketch a diameter 1.0 or 1000.0 sketch, the default extrude depth is always 216.51, how to set the extrude depth to follow a ratio to the sketch size?
In drawing mode, you can break witness lines and standard axes.However, it appears you can't break radial axes, made during pitch-circle hole patterns. The entire circle must be shown.It would be useful to break these if only part of the circle is required.Example attached: 2 semi-circles.Thanks
Geometric Tolerance value '0.01' may be displayed on window as '.01' (no leading 0) depending upon the option or in some rare cases displayed value is rounded while ProToolkit retrieved value as double is exactly typed in.I would like to have an API to retrieved as string exactly how it is displayed.
Dear All,Will be good In PTC Creo Simulate 3.0 (New Revisions) and PTC Creo 4.0 activate and choose between CPU and GPU Graphics card.The know-How experience in other FEM software... is that the results are more accurate and very fast.Many customers ask me when will be possible this option.Thanks and BR,Gorka GarciaConsultant Engineer PLM FEM CADIntegral Innovations Experts (PTC Partner Spain)
want to add public reference command in creo 3.0
I want the ability to move and organize columns and rows. A simple move left/right and up/down would be an excellent improvement.Swapping columns can turn into a multiple step process depending on the complexity of the family table.I don't always want to sort A-Z.
We have flexible components on a pcb. These parts/assemblies are not showing up in the model tree with the flexible icon (with the spring in it) after idf import nor is asked for flexibility during import. So the parts have to be searched and the flexibility has to be assigned (via File / Prepare ... or RMB ...)When assembling them manual (via GUI), then the question for flexibility pops up. Why not during the import and why are they treated like having denied the flexibility?Attached movie was taken during a tech support session. It first shows the result of an already changed assembly and then the process of import and changing manually. The idf in this case was stripped down to contain only two parts.
In response to document CS67713, there should be a setting developed to allow "negative" lower tolerance values as a default. Currently, if you have a "-.000" lower tolerance and change one digit, the sign flips to positive. This functionality is fine for those using metric tolerances but not for everyone. A config setting to set lower tolerance to negative as default should be developed.
Regarding PTC Case C12509583, this needs to be fixed by PTC. They state this is intended functionality, but it causes confusion and can become an issue because an extra hole is placed in the pattern and the initial hole (cannot be removed from the pattern) is not in the same location as the point selected. This move is slight, but can be out of tolerance. A "work-around" is stated as the requirement, not a true work-around. This work-around is to go into the options and select Use alternate origin and then you can select a point in the pattern. I propose that PTC does this automatically as they know that if the pattern is a point pattern, and the hole is a standard hole, then this fix must be applied. To me this seems like it would be an easy fix. By the way, simple holes are ok.
Creo 3.0 has a new Flexible modeling pattern option. Which is in some case handy, don’t get me wrong.But when creating large patters it gets very slow. +- 6 times slower than in Creo 2.0. Done some test with 1600 holes in Creo 2.0 and 3.0 with the different options. So please set the fastest method as standard, or let people chose via a setting. https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=12453319
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.