Recently active
Case: Proe linked to MDM and PDM software (Windchill). All provided by PTCThe PDM software is the reference. It manages the BOM. In this case the BOM hasn't to be anymore on the drawing to avoid to duplicate the BOM and to risk to share two BOMs with differents contents.If a designer has a legacy drawing with a BOM table and several BOM balloons, he needs to remove the BOM table but keeping the BOM balloons before to link, to publish the drawing to the PDM software.Actually, if he deletes the BOM table, all the BOM balloons are deleted. He has to place again one by one. He spends a lot of time. Wasted time...With an option in the function BOM, he could "disconnect", make independent the BOM Balloons and the BOM table. Then he will be able to delete the table and keep all the balloons. Won time
In Creo, the assembly tree (CAD product structure) is necessary the same as the file structure (.asm and .prt)Ability like in some other CAD tools (CADDS, Catia v5 ...), to define in assembly tree some logical nodes with "normal embeded features" like positionning constraints, assembly features, etc ... (ie not only a group)So being able to build an assembly tree different than the file structure (like in the second example). And being able to configure in creo Workgroupmanager if the CADoc structure is in synch with CAD File structure or CAD product structureIt is usefull , notably when using Windchill CAD integration and associated WTpart xBOMs (Design, and downstream Manufactruing or Customer Service BOMs).The CAD designer can create some assembly levels that we do not necessary want in Wtpart design BOMA special WTpart type exists for this case. which can be use to handle these "pure CAD levels assemblies" . But as they are not automatically managed in Windchill (
With Creo 3.0 standard installation isn't possible to customize the installation loadpoint.Even that we can change the installation folder, it's not possible to modify/delete Creo 3.0 folder and datecode folder.According to this article it's can be done only with silent installation.
Sometimes when a round fails, Creo will report the following:Recent changes have caused user-defined transition references to be lost.Changes to either the current feature's geometry or to some other feature have caused the references for user-defined transition (No. 1) to be lost.The affected transitions must have their references redefined.Recommended actions: Redefine the TRANSITIONS element for the failed feature, and select the Transitions indicated above for redefinition. Reselect lost references.In most cases there is no user defined transition, Creo has created one and it has failed. There is clearly a problem, but the error is wrong and not helpful.I propose:Creo should not create a failed user defined transition and ask the user to then fix it.Error messages for failed rounds be improved to better inform the user why it has failed.
We really need to enhance the hole table interface.I would propose that a graphic UI to allow any sketched hole or revolve sketch be converted to a user defined hole table.This would include creating the annotation note structure.We have UDF and we have sketch palettes. Now we need to expand the hole library capabilities.The motivation here is that there are so many threads that PTC has not coded. And diving into creating full fledged hole tables for entire hole families is not productive for everyone when it is the odd hole often used. In my case, a 1 degree angled 1/4" 80 and 100 TPI thread is often used.PS; what is this I hear that hole table can only use 3 characters in the name? !!! Who made that silly rule in the specification? I stand corrected on this.
Bitte stellen Sie in Wildfire 4 oder Creo die Symbole nach DIN EN ISO 14405-1, für Geometrietoleranzen zur Verfügung.Es fehlen z.B. die Spezifikations-Modifikationssymbole für Längenmaße.Vielen Dank!
ich habe einen Verbesserungsvorschlag fürs PTC CoCreate Modeling / Direct Modeling. Man sollte die Darstellung anaglyphisch darstellen können und mit einer entsprechenden 3D-Brille betrachten können. Das sollte eigentlich keine grosse Sache sein, da die Daten bereits in drei Dimensionen vorhanden sind. Zum Beispiel so: (für AutoCAD 2013, Inventor 2013 and Revit 2013) http://www.cadstudio.cz/en/apps/anaglyph/ Mit der neusten Software von NVIDIA funktioniert das sogar bereits bei Google-Maps im Browser und bei Legris/Parker Legris.com - gerade einschraubanschlüsse, bspt-gewinde
I Want groove when to make ThreadedHole.like the "thread bolt (groove)".
Currently ATB is supported for following platforms: CADDS 5, CATIA, CDRS, ICEM, NX, Neutral, SolidWorks, Creo Elements/Direct, or Granite-based model into Creo Parametric, but not in Creo Simulate Standalone.Porting part of this existing Creo Parametric technology to Creo Simulate Standalone would enable Simulate standalone users to proceed with design changes effectively.
When we use PCB Library Creo Elements / Direct Modeling creates always new objects. Saving the assembly Windchill doesn't recognize just saved components and duplicates them.
There are options under Tools>Sort By: Model Name and Markup/Instance Name.I would like there to be a config option to control which option to choose by default. The reason is that if you have multiple family tables, the default sort behavior is first by Generic name and then by instance name. The default sort will look like this:SR-6-32-1<SCREW_FLAT_HEAD>SR-6-32-3<SCREW_FLAT_HEAD>SR-6-32-2<SCREW_PAN_HEAD>SR-6-32-4<SCREW_PAN_HEAD>The default sort, should be:SR-6-32-1<SCREW_FLAT_HEAD>SR-6-32-2<SCREW_PAN_HEAD>SR-6-32-3<SCREW_FLAT_HEAD>SR-6-32-4<SCREW_PAN_HEAD>This can be accomplished by Tools>Sort By>Markup/Instance Name, but it doesn't have a config option.We have engineers who like to scroll and expect it to be in order, when it isn't.
Enable the subdivision of a face in order to vary for example color.
When creating a Broken View in a Creo drawing, The break lines produced appear to sized randomly. It would be good if the size and shape of these could be controlled, may be with drag handles and/or by a physical scale.
We are able to create Stamps with SheetMetal and to add threads with PartLibrary but we would like to to these 2 operations in 1 step.
Similar to track changes in Microsoft word. I realize there is a difference report. There is also a compare to picture. These are close, but not what I want.I want a report that highlights lines and words that have changed between 2 models or drawings. In the case of drawings I want it to compensate for the fact that views might have shifted a little bit. IE if I add a hole to something and move the view it shouldn't highlight the whole view, just the lines that represent the new hole feature. It should output 2 drawings with highlighted lines and words. The original and the new. The original would highlight lines and words that are no longer in the new and the new would highlight lines and words that are new.This report should be able to be saved as a PDF. Even better it would be great to be able to have a PDMLink publisher run this report at each check in or on demand to compare 2 different versions or iterations of a drawing.
Not part of the Creo Parametric functionality.Creo does not let control whether source’s part relations have to be copied to UDF and hence to be copied to target model upon UDF insertion.Would be great to have a change in the functionality
When defining especially customized stamps with dedicated geometry the identification within the selection table becomes complicatedSha-define-shop-table gives not much more opportunity than adding another text column with supporting comments.Proposal would be here to have the capability to a an image (thumbnail) per tool to make proper selection easier
If you have a model tree with paramter columns and a part dosn't has the parameter in the column you can click in the cell and an dialog for creating this parameter appears. But why the type of the new parameter is as default always "REAL" and not the type like in other parts? The default cell in the dialog should be the box for the value, then you could type the valu, then >ENTER< and ready!
Is there an option to set the hatch from the part as default?Even if is selected and applied, when you edit hatching again "use hatch from the library" is selected in stead of "Use hatch from the part"
I would like to disable the Creo native Save and Save As menu items leaving only API controls to handle IO? To be effective, disabling these controls should not be a config.pro setting otherwise the user can simple re-enable.
We use step-bending for large radii. Creating the corresponding bends with polylines (segments) is a cumbersome process. Some CAD systems feature a step-bending function (number, spacing, total angle, etc.). Request: We would like a step-bending option to be integrated into the “sheetmetal” program.Guten Tagwir setzen für grosse Radien gesteppte Biegungen ein. Diese sind per Linienzug (Segmente) mühsam zu erstellen.Einige CAD-Systeme kennen die Funktion der gesteppten Biegung. (Anzahl, Abstand, gesamter Winkel, ...)Wunsch: Möglichkeit der Erstellung von gesteppten Biegungen in sheetmetal integrieren.
I would like to requeste the following enhacment for Exploded State views in drawings: The ability to show the exploded state name for a view just as a section name can be displayed for a view and/or the availability of a parameter for the exploded state name for use in a note.
The default symbol placement type always reverts to FREE every time the custom drawing symbol dialog is opened or another symbol name is picked. I almost NEVER want a FREE symbol. Far and away the most frequently used placement type is OFFSET. I have picked OFFSET so many thousands of times it's not funny. It would be wonderful if I could control the default placement type with a config.pro option. Even better would be if Pro/E would remember what I just did with the last symbol or the last time I opened the dialog box. This minor change alone could eliminate several hundred unnecessary mouse picks a week.
I am looking for box selection metod in Part mode or Find surface command by Size.
For current functionality of V19.0, when load SolidWork Native file (*.sldprt) into Creo Elements/Direct Modeling, user cannot select/change accuracy.Please add "Accuracy Handling" option for loading SolidWork Native file (*.sldprt) in Modeling, just like load IGES file.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.