Recently active
After creating sheet metal parts on Creo 11.0.1, the wall thickness of sheet metal is set to read-only, so it can't be modified. I've already reported this bug to our distributor, but they said there is no solution right now, or return to old version. Is there any solution please share.
Hello, I am looking for help. My creo license was working fine 5 days ago and suddenly today i cant even get to the installation software on the PTC website. I had to re-install my creo parametrics because it was crashing every time I put my license key in.I would be grateful if someone could help me as soon as possible.
I am using Creo Parametric Release 8.0 and Datecode8.0.5.0I would like to change the bend_order table note information in the drawing. Is it possible?
I want to view a model as a wire frame with hidden lines in Creo View Express, but with black lines rather than the kaleidoscope of colours the model is in when I open it in Creo View Express. I've tried following the instructions on this help page:https://support.ptc.com/help/creo/view/r9.0/en/index.html#page/creo_view/visualization/shared/To_Edit_Color.html#wwID0ECMGS I've selected everything in the model .A Model Parts tab appears on the ribbon, but there's no Color tool on the toolbar. The model I'm opening comes as an edz file.
Is there a way to pan my view of the model left/right/up/down using the keyboard in Creo View Express? Is there a way to rotate using the keyboard? I've found out how to zoom using the keyboard (Ctrl + for zoom in, Ctrl - for zoom out) but panning and rotating escapes me.
The Connection Analysis tool allows me to check for how surfaces connect with each other. I can analyze a quilt and look at the edges between surfaces to see if they match up in position, tangency, curvature and acceleration. the last three are quite obvious. Wheich edges are tangential and which are not? But the first one is a bit strange. If I have a quilt, and no one-sided edges, and it can solidify, obviously it's a closed quilt. But I can still analyze it and see that it has edges with a position error more than zero. It may even have edges with a position error more than the accuracy of the part. You'd think such a thing would cause problems, but it doesn't, necessarily. Creo still highlights the edge as two-sided and I may still solidify the quilt. I'm guessing Creo is checking the edge of one surface against the corresponding edge on the other and looks at the difference, and due to the inexact nature of the mathematics here, it's not going to be exactly the same. The
Is there a way to pan my view of the model left/right/up/down using the keyboard in Creo View Express? Is there a way to rotate using the keyboard? I've found out how to zoom using the keyboard (Ctrl + for zoom in, Ctrl - for zoom out) but panning and rotating escapes me. I've tried searching the help and even Googling, but I can't find the answer.
Curious.. is there a way to stop the layer tree from expanding itself? I find it annoying to constantly have to minimize this tree, as it seem to always want to pop up to be seen.. Not sure why it needs to constantly pop back up after a few commands.. but it does.. Covers the model tree to the point I need to scroll down in the model tree to get back to where I was (part or feature..) I assume it's because it has a 'self esteem' issue..
Hey guys, I hope there is a better answer than "not possible" (using creo 4.0) My company is new to MBD, I am detailing a very large complex weldment. I am creating the tabs, comb-states, sections, details etc. but one thing I have noticed that is driving me nuts is I cannot add a jog to the leader lines. For the weld callouts, annotations or the notes. This only applies in the 3d space. I know how to add jogs and breaks in 2d space. But cannot seem to find a work around that is quick enough to justify the effort. The image attached is just one example of why I want a jog, so I am not dragging the leader across the entire feature.
I am using Creo Parametric Release 8.0 and Datecode8.0.11.0I am trying to add a weight per piece column into our bill of material in the repeat region on our drawing format. I successfully added a column that pulls from our weight parameter in the part but when I add the summation to the repeat region for total weight it only adds the weight per piece once and is not taking into account the quantity of the part.I also would like to know if it is possible to put this summation into a different table in the drawing that is not part of the repeat region. I tried adding the summation string to another table in the drawing but it does not work like intended. I can type the parameter into the drawing manually and it adds it but not permanently in the format.Lastly would like to make it so that the balloons are always set to "QTY SPLIT" when making a new drawing instead of having to change it.
A highly customized Config.pro file can be confusing to manage and can become cluttered with duplicate entries - for both mapkeys and options. An option to specify a separate mapkey file would make managing these files much easier. This is even more important since the ability to have multiple sessions has been added. This would enable using different config.pro files for different sessions and easily use the same mapkeys. Regardless of the many possible post-installation work-arounds, this out-of-box solution would save a lot of (especially first time) users a lot of headaches.
After use tool Isometric in Modify tab, I create rectangle and have error like that. Please help me how to do to be normal.
In Creo 10 Flow Analysis, when I try to create a mesh for analysis with a model containing 3 or more domains, the meshes for some domains are not generated.Also, the I/F between domains is not recognized.In our previous use of Flow Analysis in Creo 7, a mesh was generated for all domains in a model with up to 7 domains and all inter-domain I/Fs were identified.(We are not aware of the maximum allowable number of domains.)Using this previous model used in Creo 7 Flow Analysis, or creating another new model, does not work in Creo 10 Flow Analysis.Note that even in Creo 10's Flow Analysis, mesh generation and inter-domain I/F identification is still possible for up to two domains.Is there any special way to handle equal or more than 3 domains in Creo 10 Flow Analysis?thanks
Creo parametric 10.0 use proxy connect to externet Windchill fail.It only jump proxy authorization,can't give us windchill authorization.How can I config Creo?
I am using Creo Simulate in Creo 9.0.3.0I am having an issue during analysis of structural components using frictionless contact interfaces. The issue is that the defined contact interfaces are occasionally ignored during the analysis process. I have started 2 analyses at the same time with the same mesh and had this issue in only one of them. I have been having this issue in multiple, completely unrelated models.
Creo Schematics 10 and 11 crashes when trying to export a pdf of the design sheets. We are able to reproduce this in an empty design with two sheets. We have narrowed it down to the formats that we have been using for years. Creo Schematics 4.0 does not have this problem exporting with our current designs and the attached test design. The Event Viewer in Microsoft shows Faulting module name: DL180PDFL.dll, version: 18.0.4.3, time stamp: 0x62a673dd. Note, that PTC start template that ships with the tool does not have this issue so please test with the attached files. We are unable to update until this issue gets resolved. I am concern that this will impact other customers that have custom design templates (formats).
In Creo Parametric, it is possible to select the "seed and boundary" surfaces of any given model. My stakeholders are asking me to color in great detail for the media we create in Creo illustrate and it is extremely tedious because one must select all the faces individually. Coloring in Creo parametric is more ideal and I cannot control engineering who are giving me models with nonsensical colors. It is up to my team to color the model and we need the function in creo illustrate to select surfaces more quickly based on seed and boundary or like Maya where you can just glide your cursor over the surface to color them. Anything would be better than what is currently available to color at the face level in creo illustrate.
Hello everyone, I created a component in 3D, and then created any simplified representation, such as NO-A, N0-B, and then saved it. Then I created a new engineering drawing and selected a simplified representation such as NO-B, but the repeated area still shows component B. How can I solve this problem? Thank you --------------------------------------------------------------Translated the topic from Simplified Chinese to English using Google translateSubject - 工程图简化表示不起作用Body - 大家好,我在3D建立一个组件,然后建立任意一个简化表示,如NO-A,N0-B,然后保存,接着新建工程图,选择一个简化表示如NO-B,但是重复区域还是会显示元件B,请问这个问题如何解决,谢谢-By Community Moderation Team--------------------------------------------------------------
I am using Creo Parametric Release 11.0 and Datecode11.0.2.0Why is the next version of Creo 12.4.0.0?
Hi, I have a parameter called cage_code. I want the blank cage code in the bom column to read 96906. I have another parameter called part_number. I want part_number MS51959-15's cage code to read 96906, which is currently blank. I saw a tutorial on Youtube that showed the following relation that worked: IF asm_mbr_part_number=="MS51957-15"asm_cage_code="96906"ELSEENDIFThis looks pretty straight forward and looks like it will work. Why does it not?Do I need to do something to the cage code in the bom that reads &asm.mbr.cage_code? I tried something like &rel.asm.mbr.cage_code. That does not work. Please help. WayneF
We want to export multiple Creo drawings to PDFs that are in a windows folder. I am considering to export using Excel based VBA macro. I combined the sample macro provided as a part of installation, Async_Mode_Example.xls & the VBA code provided at https://www.ptc.com/en/support/article/CS141963. When I run the macro it fails at model.Export line. The error thrown is pfcExceptions::XToolkitNotDisplayed. I am stuck and not able to proceed. Please help. Let me know if additional information is required. I tried with Creo7 & Creo9 but still I see the same error.
Have an imported STP file. Using the IDD repair too, have selected Repair, Fix Tangency option. Seems to just make it worse every time I run it. End up going from 7 'Bad 2 side edges' to 141. Can someone point me in a direction to solidify this part? Path of least resistance, hopefully.
Currently, many actions done in DRAWING mode cannot be undone.DRAWING mode should have full UNDO & REDO capability for all operations!
1. Are you using a workaround?Actually we are working as per PTC suggestion within CS322717: https://www.ptc.com/en/support/article/CS322717?source=search Workaround: Create a mapkey configuring default values of chord height, angle control and eventually step size just after having: 1. performed >File >Save as >Save a Copy, using *.stl file as format 2. and selected Customize Export2. What is the use case for your organization?We would like to define a company-wide export profile for stl formats. Currently we can only do this to a certain extent, as the chord length angle control and step size still have to be specified later. For all other export profiles, all options can be clearly predefined in the export profile and nothing else has to be entered later.3. What impact does this problem currently have on your organization?User intervention required, use of a mapkey instead of an export profile like all other export profiles.Describe the ProblemPossibility to define default
Hi,I am currently working on creating an interface between Creo 9 and KISSsoft. I am following the manual provided by KISSsoft (2023) to complete the necessary steps, but I am encountering difficulties. Additionally, the information available online is quite limited, which makes troubleshooting challenging. (I have tried all three variants from the manual) Issue: When I click "Create New Gear" in Creo 9, an error message pops up. The message refers to Applisoft, which I´m have also contacted. However, when I check the specified folder, there is no such file present.If I create a file with the suggested name and then click "Create New Gear," nothing happens — not even an error message anymore. So what is wrong? Also this text is in the Creo console: (Nothing there is linking to the Folder above) Or is there a specific procedure I should follow to make this work (e.g., opening certain files first, executing specific steps, calculate a gear first, etc.)? Thank you
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.