Recently active
MODELCHECK AND MODEL UPDATE: Add a config_init.mc parameter to set if MODEL UPDATE should be LAUNCH when the user SAVE the model.It is important to clean the models.We actually use a mapkey but the user can save with > File > Save and ModelUpdate is not use.Thanks
As explained in the case 32062, the fact to add relation in the area "post regeneration" instead of "initial" would be very great. It will we a powerful way to correct models.
Currently in Creo Parametric 2.0, when an assembly is saved, a conflict dialog box appears listing all of the components that were regenerated, but not checked out. If a user sets components to continue, check out, etc., the save operation completes successfully. However, if the user sets any of the components to Read Only, the save operation fails. If the user saves again, then the assembly saves successfully.The only notification a user gets that the save has failed is a little note in the message line and the event manager symbol turns red. This has been the source of many lost sessions because the user doesn't notice the messages.It seems like it would be an easy fix to add some intelligence to the save operation to re-save automatically when something is set to read only during a save operation.At the very least PTC could make a pop up dialog box that warns the user that the data they worked on all day was not saved.I submitted a support ticket on this issu
First of all, I urge everyone to vote up another product idea that nicely outlines several improvements that could be made to the standard hole tool:Automatic recalculation of thread depth when changing hole depthI submit two more improvement ideas:1) The value for countersink diameter from the .HOL file should be the one initially applied to the shape of the hole. 2) For any particular .HOL table, there should be a way to specify what type of hole will be created "by default".Further background:This came up when I opened a case with PTC with regards to (IMHO peculiar) behavior of the standard hole tool. I was trying to develop a custom hole table SHCS.HOL - for counterbored and countersunk thru clearance holes meant for socket head cap screws:What currently happens (according to specifications!) is that the countersink diameter that one specifies in their custom .HOL file is overridden during the hole creation according to a relatively unknown formula:So the value for the count
In custom trajectory milling, we have the ability to use Tool Kerf when sketching the trajectoryIn "new" trajectory milling is option is gray out.
first click: elementif it is wrong you must click the element againyou will see the preview or middle mouse button to placemaybe a second click without CTRL you will also see the preview.like wildfire 5 with previewfor multidimensions you must use CTRL
An enhancement for available functions in relations for data handling.Now some data type conversions are painful or impossible. Some functionalities like itos() and string_* exist, but do not fullfill the needs.integer to real parameter sample Creo String to Integer or Real Number Relation
Environment: 1. Cero View Adapters 4.2 F000 2. Creo Parametric 4.0 M040 3. Creo View 4.2 F000 Reproduce (Video attached): 1. Create a normal Creo Assembly 2. Create a Creo Process Plan for the Assembly 3. Create N (e.g. 3 ) steps in the Creo Process Plan  
Hello, could be interesting to have to possibility to export Creo View search result in Excel or other format. Today it's only possible to export the search criteria but not the results.
In Creo Parametric, Didn't you ever need the ability to create several different Views of a model with different color assigned to its components or surfaces? For example: Set1: All Nuts colored RED, All motors colored YELLOW, All Other Data colored GREY Set2: All Pistons colored Green, All Other Data colored GREY Set3: Specific components/surfaces colored RED, All Other Data colored GREY etc. The designer can then scroll between the different sets. This functionality is implemented in Creo View Standard in Snapshots (one can create different snapshots of a model - each with different color set). Using Creo View is fantastic, but as a model is changed in Creo Parametric and exported as a new PVZ file - all preconfigured snapshots are deleted. My suggestion is to add a new Tab in the View Manager named COLOR to define and set color sets. It would also be nice to add it to the "All" tab (Combined States). Best Regards all.
Hi Experts, This Product Idea is submitted on behalf of customer ''JOHNSON CONTROLS INCORPORATED" Currently, if an DWG file is opened in Creo View, the Sheet order will be not same with that in AutoCAD or any other CAD Applcaiton, Creo View always set the "Active Sheet" as "Sheet1". This behavior will make users confused,especially when uses also named the drawing Sheet as Sheet1,Sheet2... I have found SPR 7046237, exactly same description and requirement, I also think many other customers will have the same requirement Please consider changing this behavior in future Creo View Releases Thanks Sun Yi
Standard hole dimension cannot display the pitch of the thread in Creo Parametric.Standard ISO hole thread property can only be displayed in the note, not the hole dimension.At this time you must set pitch as text manualy.SPR 2108232Release StatusDatecodeCreo 3.0Evaluating-Wildfire 5.0Evaluating-Creo 1.0No Plans to Fix-Creo 2.0Evaluating-No Plans to Fix-
Hello When working and assembling components in Piping driven by specifications. Sometimes we need to do a multiple replace of the same component. If i select all the elements i want to replace and do right click ==> Replace. I will have multiple placement windows appearing and each time i have to select the component that will replace the original ones.Here is an exemple of that : a pipe with 2 hoses and 2 sockets, i wanna replace the 2 sockets at the same time :Inside Piping spec, when doing right click on the 2 sockets ==> replace : The replace window appears 2 times : Can we have a unique replacement window that will replace all selected elements at same time (like the replace menu in assembly mode???Thanks.
Hi, 1. I work as CAD Manager in an Watchmaker industry2. We are using Illustrate 8.1 and MPMLink 12.0.2.0 on Windchill 12.0.2.33. These features are available in Illustrate Standalone and they are really helpfull for the users. They are not available when Illustrate is linked to Windchill and used in MPMLink to make illustrations on the operations of a process plan. 4. The main use case for the feature "preset explode" is that the guys who are creating the illustrations are not designers and haven't Creo Parametric, in this way it will be very helpfull to retrieve the exploded states defined in CREO Parametric.For the second point, I'm aware that the structure is controlled by the struture of the process plan and the allocated parts, but like in the previous point the illustrations guys are not the users who create the process plan.5. It will be a real time saving for the users
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Our organization is active in the field of construction machinery, combustion engines, and hydraulic components. I work in the IT department of the company, and we have a CAD-CAM integration project. We want to use the Model Based Definition on Creo Parametric (drawingless).2. What version of Creo Parametric are you currently running?Currently, we use Creo Parametric 7.0.3.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.With the use of MBD, in the combined report MBD1_Site_Map, we have to identify all available combined views. To do this, I used unattached notes and added a hyperlink. In the images, we notice that the attached notes cannot be aligned, nor moved in groups. It would be interesting to be able to align unattached notes with a hyperlink in the 3D model.4. What is the use case
At the moment, when the modeltree is undocked, you can set the modeltree width as a percentage. This option is not available when the modeltree is docked. The information at Case Details: 16262632 was incorrect, as it stated that the modeltree width would be set, it's not the entire modeltree, but only the column modeltree. As such, the product idea, request, is to be able to set the model tree width as a percentage when it's NOT floating /docked. 2. What version of Creo Parametric are you currently running?7.0.7>>8.0.35. What business value would your suggestion represent for your organization?It's a small change, but this would save frustration when changing model tree columns and not having to change the width each time.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Mechanical design and Robotics.2. What version of Creo Parametric are you currently running?7.0.73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We use assigned mass properties frequently for OTS parts, or parts where geometry+density is not sufficient to determine mass (PCAs, bearings, things with incomplete geometry, etc).We take the extra care to assign mass properties because we want the assembly mass to be correct.However, it is _extremely_ easy to forget to select "Assigned" mass properties when reporting the mass, shocking customers and stakeholders at how heavy their product is. I think it's clear to the entire community that "Assigned" should be the default, and Computed only be used in extremely rare cases (or never). The "Computed" option should be relabeled "Incorrect" and hid
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Furniture Industry, Engineer, owners of the company (?) 2. What version of Creo Parametric are you currently running?Creo 4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.As notes on this post, you cannot have a leader coming out of both ends of a note: https://community.ptc.com/t5/Creo-Parametric-Ideas/I-draw-a-double-line-when-correcting-a-note-but-I-cannot/idi-p/656070 4. What is the use case for your organization? Use in drafting when having to point to multiple items with the same note.5. What business value would your suggestion represent for your organization?Clarity in annotations.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Designing robotic mechanisms with Static, Dynamic, and Structural simulations.2. What version of Creo Parametric are you currently running?7.0.73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We have a mechanism defined with majority Mechanical Connections, but there were a couple User-Defined Coincident mates to bring subassemblies with DoFs into the larger assembly. The assembly moves as it should and rebuilds correctly.However, when running Mechanism Dynamics simulations, the load results are not physically possible (both in the Load Export dialog and for Connection Reaction Measures). Static simulations report zero acceleration (signaling a successful analysis), yet there are nonzero net force/moment reported for the rigid bodies which include User-Defined mates, and there are Implied Conn
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.discreet product/consumer products, I'm the CAD Admin, the stakeholders are the Design Engineers2. What version of Creo Parametric are you currently running?7.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Replacing a drawing model with an unrelated model loses information such as dimensions. 4. What is the use case for your organization?We design product, then 5 more with like parts and need to make drawings of them.5. What business value would your suggestion represent for your organization?This would save many hours of work and provide flexibility in our process to make a new set of parts and drawings when and how we like without conforming our process to the currently available CAD tool functions. This function would also help us keep Creo as main tool and not eval other C
File Type Creo View MCAD (.pvz) cannot be saved without containers in Creo Elements/Direct ModelingI tried to submit it as bug. Ptc created a SPR and after some months they closed it.Contents of the SPR:There is no possibility in Option to activate or deactivate the selection of containers.And there is also no possibility to work with Remove in the Select List. Containers cannot be accessed via Select.The mentioned SPR is an enhancement and this has also influenced the decision to close it.It is true that other formats (e.g. IGES) has the possibility to control containers, but in CreoView this possibility was not implemented.Please enter an enhancement request and the product management will then decide if this improvement will be considered in one of the next versions.I'm opening the enhancement request.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.PTC partner on behalf of a customer designing earth moving machines (excavators, cranes, etc.)2. What version of Creo Parametric are you currently running?Creo 73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Creo Simulation Live is not available while workingh in a skeleton part4. What is the use case for your organization?The customer works most of the development phase within the skeleton part. This is the phase where CSL should be available. At the end of the development phase the parts are created by making parts from the skeleton bodies.5. What business value would your suggestion represent for your organization?The customer cannot use Creo Simulation Live at the right time in his workflow
I would like control if option Allow tangent propagation is default selected or not.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Design systems / assemblies to address client challenges - from initial concept to delivering final product.2. What version of Creo Parametric are you currently running?83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Drawings with multiple sheets need a Table of Contents (TOC) - just like any other multi-page document. Report repeat region parameters would need to be established for just this purpose. A Table of Contents should be just as easy to implement as a Bill of Materials. A parametric Table of Contents would update any time a sheet is added, or is re-named or moved in sequence.4. What is the use case for your organization?As much as I would like to fully implement Model Based Definition, I've never had a client (in over 30 years) request a project with any
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Design systems / assemblies to address client challenges - from initial concept to delivering final product.2. What version of Creo Parametric are you currently running?83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Drawing templates can only be used during the creation of a new drawing. It would be very useful to be able to apply a template to a sheet within an existing drawing. For multi-sheet drawings this would save a lot of work. On an existing blank sheet, the applied drawing template would use the currently active drawing model and place the views on the sheet. This would eliminate having to create a new drawing, and then importing it into an existing drawing.4. What is the use case for your organization?Adding details for additional assemblies and/or parts to
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.