Recently active
1. Describe the ProblemWant to be able to measure the distance something is exploded , when in 3d2. Are you using a workaround?Currently have to create a 2d drawing with the explode turned on, to get a measurement of the exploded view.3. What is the use case for your organization?When making a Mold Design, we use the explode function to quickly move the moving components around. These are always moved with accurate dimensions keyed in. Not just randomly slideing the arrows around. If we want to measure how far things were exploded there is no way to do this in 3d. We currently have to make a 2d drawing (with explode turned on) to measure the exploded4. What impact does this problem currently have on your organization?We have over 20 users that this effects. It wastes time as we now have to make 2d drawings just to get a simple measurement we want in 3d. With the push of MBD and no more 2d drawings this is becoming even more of an issue.
1. Describe the ProblemWe want to make a base enginnering model, along with a manufacturing part that is linked to the base engineering model. When doing a Merge Inheritance of the base engineering part, It would be nice to have all MBD dimensions, transfer over into the Merge Inheritance manufacturing part. Currently this does not work. With the push for more MBD enhancements, this seems like a big one. 2. Are you using a workaround?No work around that I am aware of3. What is the use case for your organization?With our company wide push to go paperless and use MBD this would be VERY useful.4. What impact does this problem currently have on your organization?We would have to dimension things twice. Also add notes Twice.
1. Describe the ProblemAllow the model tree display filter to not show offset line in the model tree of an assembly.2. Are you using a workaround?there is no work around.3. What is the use case for your organization?na4. What impact does this problem currently have on your organization?excessive scrolling in the model tree window
Hello All,We have a problem with the Ansys Simulation module in Creo 11.0.0.0. When we run the simulation with the default settings, it always shows the message: "Solve I Failed I 0% completed," even when running with a simple part, and then stops without showing any results.We had no such problem in Ansys Simulation when using Creo 10 on the same hardware. Why is this happening?Our hardware: Windows 11, 28 GB memory, AMD Epyc 7V12 (4 CPUs), 2.4GHz, and NVIDIA T4. Thanks in advance to anyone who may assist us solve this issue.
Hi, I created account to use the Creo Elements Direct Modeling Express 8.0 as a private user for free but the app is asking me for a company proxy server settings. I have not a company. I would be just privet user. If not possible I would delete my account.What I can do to use the free app?If not possible, how I can delete my account connected with my email "kacparek@wp.pl"? Thanks in advance
how to unbend the curved rectangular stripI tried with flattened quilt results are as follows but we want continuous flatten curve stripattached refence model to Flatten creo 10.0.5.0
Check out this video on "Creo Class A Surfacing NEW SCHOOL" with Bart Brejcha from Design Engine and Ryan Butcher, PTC (Solution Consulting, Fellow). Related Trainings by Design Engine Creo Surfacing Training: WEEK ONE Creo Surfacing: WEEK TWO (view in My Videos)
Odd problem but here you go. I have an assembly drawing. We publish using default HPGL/2 format. Everything in Creo View 9.1 looks fine except 1 sheet seems to have drawing extents that are off. In Creo Parametric 9 its fine. All other sheets are fine, D Size and when you view or Print to PDF, sheet 2 appears scaled down and not maximized to the paper size. Very odd. When I've seen this in the past, its been due to a piece of geometry or sketched entity outside the field of the drawing border except we cannot find anything. Any other reason for this behavior? The drawing bounded boxes also appear inside the field of the drawing too. Sheet 1 above normal. Sheet 2 below not normal
I just noticed a strange behavior in CREO 10. In my model tree I selected a single part representing a volume (extruded feature). Within this part/volume I'm packaging other components. I want to see through this volume to see the other parts. So, I select this Volume (2nd art in model tree) click Edit Modal Appearances... and change the transparency setting to see-trough. What happens is another part (3rd item in modal tree) transparency also changes. I noticed this and wanted to turn off transparency. When I edit this part (3rd) whatever changes I make impacts the other part (2nd). Why are these two related for Appearances? How do I break this relationship? Mind you I am only selecting one part to apply transparency.
Hi, We have a new installation of Creo and Windchill., and I am setting up the system before rolling it out to our users. I want to be able to use IFX in a multi-user collaborative environment where everyone uses the same setup, thus having the same options. I also want to store the data in Windchill.. I have configured IFX to use catalogs of the fasteners we want to use, and I have created the dat and prt files to accompany this. The dat files contain all the instances that we need, and also adds specific parameters to the files on creation of the prt instance. All of this works perfectly when in a stand alone environment on my PC. (Thanks to Oliver of B&W for his help on this) The problem occurs when I try and enable the 'Windchill' options in the IFX options. I have uploaded the catalogs and data files to Windchill, and pointed the options to these folders:When I start IFX, it creates the folder ‘PATH_ABS_WINDCHILL_DOWNLOAD’ and populates the sub-folders correctly
Hello, I would like to calculate the bolts, but I don't know exactly how to set the constraints.Should the thread also be designed? I'm hoping for a good idea. Designed with Creo 10.
I am in the process of transferring thousands of Solidworks parts over to CREO 5 and trying to create a macro that sets material and converts to Sheet Metal for us. So far so good with that, but in order to create the Flat Pattern as part of the Macro it requires a face to select as the correct Orientation. I'd like to automate that as well if possible but the top face of the flat pattern could be different for each part, so I'm wondering if there is a way that at time of creating the Flat Pattern "Rep" the correct orientation could be saved as well? In the Flat Pattern Preview window it automatically positions the view oriented towards the flat face, but for the life of me I cannot figure out how to have it use that view and save it as a new Orientation. For anyone helping me with this to understand what I am doing here, after the Flat Rep and correct orientation is created I then have a macro generate a new drawing (for Flat Pattern only) using a template th
Hey guys, Im currently testing a VBA Code from a college, that was written for Creo 4. In one part, it uses the method IpfcParameter.GetDriverType(). It worked fine in Creo 4, but now with Creo 10, it gives the Runtime Error '-2147352567 (80020009)': pfcExeptions::XToolkitObsoleteFunc. The method is still present in the VB API User’s Guide 10.0.0.0, so I dont know why it should be obsolete. Is there a workaround to get the value otherwise?
Softwear: Creo ParametricRelease: 7.0Version: 7.0.8.0Dimension ⇒ Tolerance “Plus - Minus” ⇒ Selecting None will automatically enter “-” for the lower limit.If the upper and lower limits of the drawing dimensions are both “+” (plus sign),it is easy to make a mistake, and even if a mistake is made, the small size of the symbol makes it difficult to find the mistake.It is not possible to set the Pro/TOOLKIT module to not enter “-” in the lower limit tolerance field by default, even in the Pro/TOOLKIT module.Therefore, I would like to be able to select whether “-” (minus sign) should be automatically or manually entered for the lower limit value.
I'm trying to assign a value for a new parameter called "AAA" using feature Name not feature ID. This code works wellAAA = b:8 But this code doesn't work with meAAA = b:fid_EXTRUDEerrorInvalid symbol 'b:FID_EXTRUDE' found. knowing that:1- the feature which is called "EXTRUDE" has ID=82- I'm working inside the part relations3- I'm using Creo Parametric 8.0.8.0
I have downloaded the PTC Control Center.msi file but when I go to execute it I get an error message. Error writing to file: c:\users\<username>\AppData\Local\Programs\PTC\Creo\ControlCenter\bootstrapper.exe The folder bath is created but that file does not exist? I am on Windows 10 Pro build 19045 on a MSI GE76 Raider with an Intel Core i7-1180H, 16GB memory and a Nvidia GeForce RTX 3060. I have removed the PTC folder and tried a number of times and get the same failure.
I know I'm working backwards, but such is life. I have modeled a mold and now I need to create the casting that would fill the mold. I'm not finding much help, on this process. Creo 10 Thanks
In models that use a lot of shrinkwrap, there is a considerable wait time when opening and operating files.Due to the assembly structure, it is not possible to completely eliminate shrinkwrap.I have attached a sample model, so I would appreciate your advice on improving the operation.The sample model is a simple one created for verification purposes. In the actual model, "opening a file" takes about 4 minutes, and other operations take even longer. Also, the operations in the question are only representative ones, and in reality there are many other operations.It would be even better if I could improve it by upgrading my PC's specs. Which parts of my PC should I upgrade? The graphics card, the memory?
HiI have an issue with the visualization of the dimensions in the drawings in Creo 11.0.2.0.The dimensions are not sharp like not perfectly in focus.I have attached one screenshot with the same drawing opened with Creo 7.0.2.0 (left) and Creo 11.0.2.0 (right). There is a big difference for me.I tried with another monitor with higher resolution and the result is the same.Any one can help me?
Here is an example of a Simulate model with an integrated Mathcad-Prime (version 10). The static load in Simulate is taken from Mathcad.
1. Describe the ProblemCase - 17544648Article - 430230Patterns for datum features only allow general option pattern type. There is no way for datums to change so they should be defaulting to identical not general.2. Are you using a workaround?Only able to use General patterns3. What is the use case for your organization?patterns of points/axis/coordinate systems often are needed4. What impact does this problem currently have on your organization?large patterns of datums take a very long time to regenerate.
I am a single use, so I do the sys. admin, but I'm not really that savy with it. I have received my new license, but I don't have a clue as to how to load them. I've searched high and low on PTC support, and here PTC community to no avail. I've look through the files on my PC and nothing stands out as to how to load license files. I'm running Windows 11. Please help, I'm dead in the water.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10.0.3.02. What is the problem?Creo Cable Network Path needs to publish via CADWorker and then the network path want to see in CREO VIEW MCAD.3. Are you using a workaround? If yes, please describe it.no4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.POC5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)POC
1. Describe the ProblemAn option in Creo drawing for View outline size to ignore all the hidden geometry. Currently there is a hidden drawing option EXCL_CRV_FEAT_FROM_VIEW_OUTL=YES only applicable for hidden sketches. 2. Are you using a workaround?Can use partial view or Simplified Rep3. What is the use case for your organization?We create big assembly with copy goem. Its hard sometimes to manage view outline4. What impact does this problem currently have on your organization?Drawing is cumbersome
1. Describe the ProblemEnable User defined Fringe, Measure and Graph results - which are based on existing Measures.2. Are you using a workaround?Multiple Measure points, which is quite manual. Hard to find worst locations over model.3. What is the use case for your organization?Welding joints and weld fatique estimayes require results like Max Stress-Min Stress at point. Today there is no way to plot this kind of User result in Fringe over model.4. What impact does this problem currently have on your organization?Unable to verify the product performance with Creo Simulate.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.