Recently active
The existing quickstart menu in PTC Creo Elements / Direct Drafting Fluent has rather tiny icons. Particularly Drafting users of middle years have difficulty seeing these tiny symbols properly and as the majority of highly skilled construction designers are getting older, the resolution of monitors has also been steadily increasing, yet changing the Windows settings does little to change the size of any symbols except for those found in the command line interface. Das vorhandene Schnellstartmenü in PTC Creo Elements / Direct Drafting Fluent enthält eher kleine Symbole. Insbesondere für Drafting Benutzer mittleren Jahre ist es schwierig, diese winzigen Symbole richtig zu erkennen, und da die Mehrheit der hochqualifizierten Konstrukteure älter wird, nimmt auch die Auflösung der Monitore stetig zu. Die Änderung der Windows-Einstellungen ändert jedoch die Größe der Symbole kaum außer denen in der Befehlszeile zu finden sind.
Add header and Footer to U3D PDF with company logo and other basic details.
- The attached assembly shell_simple_assembly has two parts prt1.prt and prt2.prt. These two parts are quilt faces and are at some distance hence I expect Creo to show NO interference.- From Creo UI, when I check for global interference (Analysis--Global Interference) by including quilts, it shows interference between prt1 and prt2.- I feel that interference was shown by Creo because Prt1 has hidden feature Fill1 which intersects the prt2. - I also get interference between the two parts using Pro/Toolkit API ProFitGlobalinterferenceCompute.- For this API I've sent following values as argument:1. assemble object2. PRO_FIT_PART3. PRO_B_FALSE (set facet)4. PRO_B_TRUE (set Quilts)5. PRO_B_FALSE (fast calculation)6. ProInterferenceinfo object- Here, for this case, we are expecting that there should NOT be any interference if features are hidden as did for this model. - The above Pro/Toolkit API should allow user to give input if to consider hidden features or not while calcul
it would be interesting to have a config's option to define the cross section type used by default : through or offset.
Hello, The calculation of the torsion parameter is feasible from any section of beam. This parameter allows the software to calculate the torsional stress seen by a beam section. Creo Simulate does not seem to calculate this parameter correctly if the section is obtained through a sketch. Example : The calculated parameter is : 9606.25 for standart beam (from library) 1.3e+06 for the sketched beam Finally a gap of 99.3% between the 2 beams. And stress are finally false. Thank you,
Create a JT file with a contour from a Creo Simulate fringe plot
Bonjour, Il parait aberrant que lors de l'impression d'un plan en pdf ou autre, les axes , plans et autres visualisation soient pris en compte alors qu'il ne s'agit que de visualisation.
Similar to a Nastran GLUE interface, create an interface like the weighted link for surface to surface interactions on components that have a manufacturing tolerance gap. Intention is to have a model with a gap that behaves as if the material was there without going back and modifying all the cad models for the analysis. Rigid link will not behave the same if the gap is not very small.
When I insert the parameter jog_dist in the boring feature and the cycle format is couplet, the cl-data is correct. For some cases it´s necessary to switch to the goto output method. But then the parameter jog_dist don’t apply in the cl-code. Please fix this issue; witch is documented in article CS17739
Prise en compte de la norme NIHS dans les normes de percage. Affichage de la lettre S devant les valeurs de perçages comme le M pour la norme ISO.
Message area position chage. Bottom to top.
We are trying to create a hole chart for PEM inserts. Some of the type of inserts (IUB/IUC) require an 8 deg countersink angle. It turns our there is a limitation in Creo where the angle must be between 60 and 180. Why? This doesn't make sense. Please remove the limitation. Thanks!
Currently in Creo 4.0 M040. When creating a revolve feature you must create a solid line on the axis of revolution for the sketch to be determined as closed. This is a waste of time, and just more items to clutter the display. If the endpoints of a continuous curve lie on the axis of revolution consider it closed.
The toolkit does not seem to provide functions which allow the user to read the tessellated information for annotations. This information is needed to recreate annotations for various downstream MBD workflows. It would be great if Creo toolkit provided API to read the tessellated/stroking information for all annotations and leader lines.
Hi, I am expecting to have dimensions in drawing to be vertical, parallel and centered to the leader (Witness) line. Regards, Amit
While almost every CAD software doesn't allow for backward compatibility in CAD files, It would be nice for those who utilize subscription licensing to be able to have that luxury. Most companies disable backward compatibility to ensure companies stay current with maintenance, generating a consistent revenue stream. This has caused issues for companies that have many smaller projects which work with many different clients/customers where a certain version of Creo (not necessarily the latest) must be used. This would be a MAJOR help to organizations like mine in which versions of Creo are dictated by project needs, not always a central IT/company dictate. This would also be a great reward/incentive for people to move to subscription licensing.
WHen you do a merge or inheritance feature in a part, you can right click on that feature and select "Open Base" to open the source model. The same should be available for Copy Geometry and other data sharing features.
If a cross-section references a sheetmetal part in such a way that it will fail when flattened, it should still not show a failure during the flat pattern preview. Only geometry errors should be shown. The cross-sections have nothing to do with the flat pattern preview. Refer to ticket 14023523.
For some use cases, it is necessary to handle the depth of the first cut in area turning otherwise as the following. This is the case, for example, for components with heat treatment and a scale layer. Actually it´s not possible, to generate automatically a different step depth to cut this area away. But this would be better for the cutting Tools. Please add this functionality for area turning. I referee to article CS281947
The possible tools for cut line milling are currently very limited. Only 7 tool typse are allowed, but not with all Parameter combinations. Please add here more ore all typs. I Referee to aricle CS282489
Apparently, there are major issues with the new Creo 4.0 ASME Symbol font. If you export it as a dxf, dwg or pdf with the setting to NOT be stroked, it does not export well. In dxf and dwg, if you double click the text, the symbols convert to boxes. In PDF, they just show as boxes. Please fix ASAP! -PTC management can refer to case 13941435
In an assembly, I hid a couple of covers and components that were in my way by highlighting the components in the graphics window, right-click, Hide. I assembled some components and created a section view. PRODUCT IDEA: The ability to unhide "Last set" or "Everything I hid". I don't want to Unhide All, because there are other components that other people hid and saved layer status, so they intentionally do not want those components to show. I don't want to save and close the assembly, erase not displayed and reopen the assembly for the components to unhide because it is a fairly big assembly and I still need to work on other areas of the assembly. The components I hid are deep in the bowels of the model tree and I don't know where they are. I did not pay attention to the names of the components that I hid when I hid them.
The actual mirror function in Creo Parametric is so bad, we cannot edit the contain to add or remove feature, if you mirror a pattern and then edit a dimension of the internal feature the change won't be propagate into the mirror feature. Seriously If I decide that I need to mirror a feature is because I need the mirror to be the exactely the same.... you really need to review that functionnality quickly it's definetly a lack of efficiency in this CAD tool.
It could occur modifying accidentally wrong values instead of the needed ones due to the recognizability of rows in the model tree. PTC: Isn't it possible easily to make visible the rows in the model tree with any visual help lines/colors like other software programs do? See image
It is not possible to compare easily active drawing and the last save version (compare in session drw vs last save drw). It 's possible in 3D mode. It's possible in CreoView MCAD. It would be nice to have these great feature. In 3D: In CreoView MCAD:
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.