Recently active
Hi, I recently download Creo 4 M040. I want to check CRC of my download. But on creo site CRC is not provided. It's better if provide CRC for each file so user can check whether download file is good or corrupted. Thanks, Jimesh Makwana
Datum created within sketch feature (such as points, axes and coordinate systems) should be shown in the model tree as a sub-node of the sketch feature itself (in the same way as the Datum features created on the fly are embedded into an extrude feature)
With the latest changes to licensing, it seems that once our license has only 15 days left, a pop-up window appears warning of this, even when running in batch mode (no graphics). There is no way to disable this warning window. Since we run approximately 4000 tests on multiple machines, this means that those machines ground to a halt and cannot complete testing. The tests are all run in batch mode, no interaction from a person, so there is no way to dismiss the pop-up window. Ticket C13980004 was open to address this issue, however I was told there just isn't any way to solve this currently and I should submit an enhancement. To me this is more of a bug - you are basically taking away 15 days worth of license use.
In Creo, geometric tolerances and datum tags may be placed on a dimension witness line. Currently there is no way to determine the leader line points to a witness line for a given annotation; no API support is available for this information in Pro/TOOLKIT. Without this information, Creo PMI can not be represented correctly in other derived formats for downstream usage. This gap results in wrong visual representation of PMI, therefore we need support for this information in Pro/TOOLKIT.
Renaming parts, subassemblies and drawings is a time consuming work. It should be a lot easier if you have the next possibilities: - Renaming the file name, common name etc. directly in the model tree (also in collaboration with Windchill) - Renaming the file name, common name etc. via an Excel table, so that a consecutive number for each part easily can be generated. This functionality is already available in Creo Elements/Direct. The same functionalitu should also be avialable in Windchill
Circular cross-hair axis extends beyond the circular edge only works fine for simple holes not for counterbore holes. The drawing option "circle_axis_offset" should also include counterbore holes. current situation New Idea
It would be useful to have a config option to set the default to View Only drawings. It could be used on publishers (workers), shop floor workstations, etc. to more quickly pull up drawings. I've found that it reduces the time to load the drawings by upwards of 98%, while also reducing the time to generate the PDF by the same amount, and also reducing the file size by 70%. I've noticed while troubleshooting this that having the config option save_display set to yes doesn't always show all of the views correctly, as some are left blank. Going to each sheet and updating the views helps, but also doesn't produce the desired result. Perhaps another setting is needed to force the update of all views on all sheets prior to saving the display.
To visualize the impact of stress error between elements on derived results such as fatigue life Creo Simulate should allow an option to turn off nodal averaging at plotting grids in the *.s0 files.
It would be very helpful if annotations in 3D allowed elbows like in the 2D drawing. In the picture below, the same symbol is shown, but the example on the right has been brought into a drawing. In the drawing, Creo provides additional handles on the leader to add an elbow, which is unavailable in the Part/Assembly modes.
PTC should add two options in Simulate results window. 1. Show Beam Section. 2. Show mangitude of applied Loads, not just anarrow and the direction, as we see it now.
For family table, the parameter "overall_size" can't be used for all the instance....
At the moment, it is only possible to select the type "drilling" for trajectory milling. Why it´s not possible to use the other drilling tools, e.g. "basic drill", "boring", "spot drill", etc. this restriction is incomprehensible and not necessary. Please allow more typs for the trajectory milling. I referee to call 13969357
When inserting a CL command via the menus, the highlighting scheme is currently not clear. I add a command and the next call highlights the one above. Would it not be better to highlight the last used? I referee to call 13926607
While in the drawing module, I have noticed that you are limited in what you can add to right pull-downs. For instance, while working in a drawing and you are in the Annotate tab or tools tab, you can't right click and add a function from another tab. In our case, adding a function from the Layout tab while working in the annotate or tools tab. I would be nice to be able to add any function you want to customize your pull downs. It forces me to have to change tabs. This would be a nice little time saver. PTC currently notes it as being working as designed.
When defining rotational limits in pin connection allow to set more then 360 degrees in total limits. For example +225 deg. - 225 deg. is not possible, only +225 -135 or only combination that gives 360 deg. total.
Helps to monitor big and worldwide installations in order to meet system requirements. Adresses stability and performance.
Hello, when auxiliary app is not installed but config.pro calls local file path then dialog appears after every Creo start. For many users becoming this action useless and annoying bcs there is just an option "OK" to continue. Would be nice to have a choice for suppressing app dialog box at all or move it to message area at least.
We are producing manuals with illustrations for the Middle East. Therefore, we are required to write them in Arabic. There is no way today to write in Arabic in Creo Illustrate. Our illustrations are lacking some informations because of that.
I think it would be nice if datum (planes and axis) creation window would have a tab or button allowing you to control it's properties (gd&t) so we don't have to create the datum, then edit properties to make it a geo datum. Thanks Denny
Currently, by default, the model's geometry matches the nominal dimensions. For example, if you have a feature defined at 30 deg +5/-0 deg, the model will locate the feature at 30 deg. However, the median location of that feature would be 32.5 deg. There is currently no option to generate the model at the median dimension by default. Using the tolerance analysis tool "Dimension Boundaries", you can force regenerate the model to the middle, upper, or lower dimensions, however, this only applies to features that have already been created. The request is that we have the option to set the default model generation to either upper, lower, middle, or nominal. This is very important for model based definition when the model is being used to directly drive NC processes. Often designers wish to convey design intent through the use of unilateral or unequal bilateral tolerancing, however, the model should still reflect the median dimension so that the manufacturer's are t
I was looking to see if there was a wall thickness table for sheet metal as there is for internal bend radii. It seems that "pull down" should open up to where you can have one linked. This suggestion stems from designers typing in various thickness for the same stock i.e. .060, .062, .063 for 1/16 aluminium. It has caused some issues here when creating flat patterns for our internal shop. There was a day when all designers here were pretty much on the same page, but an influx of hiring over the past 10 years has created a "free-for-all" in designing processes and creativity. We all know there are various ways to create the same part and sometimes this can create issues when the released part/assy is to be modified and the task is given to a different person than the one who initially deigned it. But that's another story, and a long one, for another day. Having a table, similar to the one for Bend Allowances to give the ability to select material thicknesses rather than type
Working with the Pro/TOOLKIT libraries in _DEBUG mode is not possible.Debug versions of the libraries are required.
ver.20 A list of mouse operations described in the helpBecause it was the same description as beforePlease correct it.Two pages can be confirmed for operations which can not be used in ver.20 in the help page description. [False]Ctrl + left button ⇒ continuous panCtrl + center button ⇒ continuous rotation [Correct]Ctrl + left button ⇒ noneCtrl + center button ⇒ Zoom I do not think that it is a very important pointThere was a voice to change, so please consider.
I would like a parametric handshake in taking models through Creo Layout. The loop presently involves me importing a model cross section into Creo Layout. I then use this 2d import to develop my needed tooling. When the 2d layout for tooling is developed I will bring this into my downstream die model. The parametrics going downstream from Creo Layout to the die works because the copy geometry will change in the die. Unfortunately there is no parametrics when taking the model in to Creo Layout. If something gets changed in the originating model this has to be manually modified or reinserted into Creo Layout. Below is an example of the model section I would like to insert in Creo Layout with the change circled. Below is my Creo Layout drawing which has not changed. Almost everything in Creo Parametric has a parametric flow through; please make imports into Creo Layout parametric.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.