Recently active
Hello, We are on Creo 9.0.3.0. I can make a 2D Family Table no problem, but then I am stuck with the names of the parameter that include the underscore since a lot of names are muli-word, and cannot be named with any spaces. I had THOUGHT that's what the Description field would be for...so you can just show that as the name instead of the actual name, BUT I cannot figure out how to use the Descriptions AT ALL. fam.inst.param.description doesn't work, and I also cannot figure out how to even reference the description in Relations if that route is necessary to fix this. Next, I have Objects (They are Word docs) that disappear after saving, leaving, and reopening the drawing. They are in the tree, and selectable, and even editable, but are not visible on the drawing or after exporting to PDF. I was having similar issue for Images and ended up being a setting in config.sys. Is there a similar one for Objects? Thanks
I've encountered an issue in Creo. When placing components in an assembly, clicking "Placement" is supposed to show the placement box (as seen in the attached picture). However, even after clicking "Placement" multiple times, the placement box does not appear.Is this issue caused by Creo itself, or did I accidentally change some settings that disabled the placement box?Because at first, I thought the box might be displayed/appeared into another screen, but after I checked, there is no Placement Box at all. *Additionally, I noticed a similar problem in the Chamfer feature. The "Sets Box" does not appear either (refer to Picture 2).
1. Describe the ProblemAfter using Creo 11 performance report, it occurs to me that there is no force full regeneration function. Doing a full regeneration is really important to investigate hidden errors and problems in models. This is evident when using the new reporting tool compute which I’ve been using on models to find serous errors that otherwise are hidden from uses with the part hasn’t changed since last regeneration caching. This hides problems. 2. Are you using a workaround?None, but there are some odd techniques to force a full regeneration but no direct action. I’m forced to use creo 11.3. What is the use case for your organization?The use case for the enhancement you suggested revolves around model integrity and error detection. Specifically: - Improved Debugging: A “force full regeneration” feature would allow users to identify and address hidden errors or issues in models that might otherwise go unnoticed due to caching or other optimization mechanisms. - Enhanced
1. Describe the Problem Please add the ability to toggle between Line and Arc while creating geometry in a Sketch in a Model. This function already exists while sketching in a drawing by pressing the S key. This is a feature already available in other Modelers. 2. Are you using a workaround?I have not found a work around3. What is the use case for your organization?This would increase sketching efficiency by saving mouse movements and mouse clicks.4. What impact does this problem currently have on your organization?Slows down modeling time and efficiency.
1. Describe the ProblemCurrently, there is no warning mechanism in Creo to alert users when they are about to save a model in a newer version of the software. This can result in unintended compatibility issues, as files saved in a newer version of Creo cannot be opened in older versions. This often leads to accidental revision upgrades, which disrupt collaboration in teams where members may still be using earlier versions of the software. The lack of such a warning increases the risk of workflow interruptions, data loss, and time-consuming rework to recreate or convert models for backward compatibility. I propose an option to warn users they are about to save the current model file in a new version of Creo making it non backward compatible in prior versions. This would prevent accidental unintended upgrade of Creo revision. 2. Are you using a workaround?No3. What is the use case for your organization?Have multiple versions of creo and accidentally saved a file and now st
Hi everyone, What's the correct syntax for Creo 4.0 to stop throwing this error about profile-tolerance: unequally disposed profileresulting error The underline appears as soon as the (U) symbol is put into the tolerance box.
HI, I’m having trouble generating NCL code for PostProcessor on the Mill turn machine. The machine is equipped with milling and turning heads as well as two spindles. I need advice on how to properly generate NCL code for both the upper and lower heads of the machine.If anyone has experience or tips, I’d greatly appreciate your help.
Community, Why is the number of frames selection greyed out for non-linear analysis? When trying to animate, there is no control to slow down the animation, as the animation moves back-and-forth rapidly. Thanks in advance.
By a clone part I mean a fully dependant copy of a part that can be used in separate assemblies but if the original part is modified, the clone part can be updated automatically, And if it is possible, can be assigned a different material to the clone?
1. Describe the ProblemFor the post-processing purposes within Creo Flow Analysis, it would be very appreciate to enable calculation of averaged and mass averaged report for velocity (so, similar as for total pressure). This option should be available either through XYPlot either/and through interface output property. 2. Are you using a workaround?The workaround for averaged velocity is to manually calculate velocity via simple equation: v=Q/A (Q being the volumetric flow rate and A being the section area), No workaround for mass averaged velocity.3. What is the use case for your organization?Working in hydraulic company, CFD simulations refer to internal flow. During the post-processing of simulation results, it is essentially for us to know averaged and mass averaged velocity --> this data is crucial to calculate "efficiency" of our components.4. What impact does this problem currently have on your organization?Use workaround (explained above) or even using another CFD tool.
1. Describe the Problem Reference: Ticket - 17604467 Article - CS433589 We are trying to create a mapkey that changes the layer state of a specific view in the drawing. There is no way to select a view, using a mapkey. The code used for selecting the view in the trail file is:~ RButtonArm `main_dlg_cur` `proe_win` proe_win` 9 914 402 0 4 1317 774 1920 1080 29699656~ Move `main_dlg_cur` `proe_win` 9 914 402 0 4 1317 774 1920 1080 29699670~ Timer `` `` `popupMenuRMBTimerCB`~ RButtonDisarm `main_dlg_cur` `proe_win` 9 914 402 0 256 1317 774 1920 1080 29700143~ Exit `main_dlg_cur` `proe_win` 9 914 402 0 4 1317 774 1920 1080 29700144 This code is not repeatable in new sessions. 2. Are you using a workaround?No. Our mapkey does not have the needed functionality and automation that it requires. 3. What is the use case for your organization?We are automating a PCB drawing automation mapkey. Most of the sheets and the drawing views will have the keep-outs hid
Is there no way to have a master material, say, Al6061 applied to multiple parts?If I update the master material all the parts that were already made with this material do not get updated. So now to enforce the master material I need to manually select and re-assign the same material......Surely there's a way of making the Library a reference for said part(s)?
I have received an academic license for Direct Modeling (see below). How do I download Direct Modeling?I DO NOT want:Direct Modeling Express"Flexible modeling" tab within Creo ParametricEducation e-mail support asked me to open a support ticket, but I don't have an account with a high enough access level to open a ticket.Thanks for any help! Spoiler (Highlight to read)#---------------------------------------------#License Pack for Session ID xxxx#--------------------------------------------# PTC License Pack#License codes for PTC Product.######### Creo Direct Modeling Education (Schools) ##########Feature Line Type = INCREMENT#Feature Name = CREODMA_Schools3#Feature Version = 42.0#Version = Creo 11.0#Number of Copies = uncounted locked license#Supercede = Y#Issue Date = 28-NOV-2024#Expiration Date = 29-NOV-2025#Node Locked Option = Pro/ASSEMBLY#Node Locked Option = Pro/FEATURE#Node Locked Option = Pro/INTERFACE#Node Locked Option = WLO#Node Locked Option = Pro/SURFACE#Node L
I can align and distribute the annotation labels relative to each other to the right, left, bottom or top: An isometric alignment should be also possible.
Hello, Would be nice to be able to add tables and especially BOM tables into an ILLUSTRATE "figure". Regards,
Creo 10 It seems like when I display hidden lines some of them appear as blue dashed lines when they should appear as gray dashed lines. Why is this occuring? How can I fix this? I have already tried editing the line style to Hidden and still they appear as blue dashed but when printing follow Geometry line style. I can change the hidden line pentable settings and they only effect the gray dashed lines. Below is the drawing in Creo: Blue dashed line and gray dashed lines are both hidden items in the view. The gray hiddens lines appear correct when printing, but some of the hidden lines appear as blue dashed lines. This is cuasing issues when printing. The blue dashed lines follow the geometry pentable settings but as dashed lines. Below is Print Preview - using pentable - You can see the gray hidden lines appear correct and follow the pen table settings, while the blue dashed "
Hello, Is anyone using a Samsung 49" Odyssey G9 monitor for Creo10 and beyond?Pros & Cons?All the best,HeinDIYvan.com
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? We are using Creo illustrate 8.1 to 11.12. What is the problem?In the MPMLINK Process Plan, adding part number callouts for top node of sub-assembly is currently not possible in Creo Illustrate. PTC has suggested a workaround: combining sub-assemblies into a single part using combine option. This allows for callout placement but is only applicable when working outside of the Process Plan in Creo Illustrate. The Combine option is accessible in the Edit Structure mode, which is unfortunately locked / Freeze when using Process Plans in Creo Illustrate.3. Are you using a workaround? If yes, please describe it.No workaround available4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. We create Illustrations in MPMLink for KIT assemblies, where it is necessary to show Par
Dear all, I'm using CREO 10 i would know if could be possible to repeat a part along a sweep feature keeping a specific orientation compared to the assembly, for example i would: -repeat the grey part along the sweep cut keeping the same reciprocal alignment-merge all the bodies obtained in a single one-subtract the body obtained from the white onethe result should be similar to this onebut the way that i obtained it, is not easy to use and to manipulate and the subtract command always fail.Maybe there is another way that i haven't considered how to do this. Thanks previously for the help
when applying a distance constraint, the dimension was given in mm and is not translated to drawing properly, it was entered as 1mm on the assembly, more like 20mm is actual constraint. have i the wrong template, i may have started with the wrong template
Hello ! I am using Creo 7.0.7.0 I am looking for a way to add a drawing table with specific dimensions for which we request inspection. I have manually made this table :I am looking for a way to automatically fill this table : the idea would be to refer the dimensions that need to be inspected somewere and that it fills the table and extract the minimum tolerance and maximum tolerance. Also it would be great if this table would update as the dimension or tolerances are updated. Is there a way to do that with Creo maybe with a drawing table, parameters and a repeat region ?
Hi I would like to understand if it is possible to program a .ttd file for Creo Distributed Batch, to import and convert pkg files I am using creo parametric 8 If it is not possible I ask to program a Mapkeys in Creo Distributed Batch, for that activity. If I use creo with normal operations I can convert the file but I need to program the conversion activity without engaging the program as for the steps. I am trying to reprogram a ttd file from another but it fails I am missing some information. I was looking for a guide. THIS IS THE TEST I DID .. ON TTD FILES but obviously it fails Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Ciao vorrei capire se è possibile programmare un file .ttd per Creo Distributed Batch, per importare e convertire file pkg sto usando creo parametric 8 Se non fosse possibile chiedo per programmare una Mapkeys in Creo Distributed Batch,
The traceback.log file content regarding the traceback error I received on creo parametric is as follows. How can I find out what caused the error? -------------------------------------------------The trace creation timestamp is: Pzt Ara 09 14:28:49 24The executable build timestamp is: Per Kas 17 13:11:06 22The datecode is: 2022364The pro machine type is: x86e_win64The process ID is: 9676The traceback type is : CRASHThe logger exit status is: 00003The Trail is: trail.txt.3297The release is: 8.0The product version is: 8.0.7.0The product title is: Creo Parametric-------------------------------------------------Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 18048.Main Thread 18048=====================0x00007FF67BC7265F NULL (NULL:0) (xtop:0x00007FF678300000) ( 0x8e9516d0, 0x10, 0x1, 0x0 )0x00007FF67B0B78E3 NULL (NULL:0) (xtop:0x00007FF678300000) ( 0x860f1ab0, 0x5bfad420, 0x0, 0x0 )0x00007FF67C0A8CC4 NULL (NULL:0) (xtop:0x00007FF678300000) ( 0x2, 0x5e9, 0x4a42b808, 0x
I'm trying to get centerlines to print properly, either on paper or PDF. My DRW is shown in 1st pic. The centerlines are adjusted so that each hole has the small dashes in the center. The 2nd pic is what the PDF output looks like -- small dashes are gone. I found plot_linestyle_scale setting, which does exactly what I'm looking for, but for the DOTFONT line style (hidden lines). Anybody know how to similarly adjust scaling factor for CTRLFONT line style?
Hello,Where do I make the configuration within CREO to save the drawing sheet, could I make it automatic? Printed below
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.