Recently active
I would like to see a balloon snap line option to create a "free floating" snap line. The only options available are offset from view boundary and off set from object (any straight line on view). We can drag the ends to shorten or lengthen the line, but cannot change the angle. There are many times that I want an angled snap line to arrange balloons between parts in an exploded view but am limited to whatever angle I can find in the view.
I just changed the orientation of an annotation (free note) and it went way off the page to the point where it was impossible to find it. I was surprised to find out the the zoom to selected feature doesn't apply to annotations. This idea is to make it so you can zoom to an annotation to figure out where it is in the model.
Today, if we don't have the capability to assemble several components at once. If we want to assemble several components by default constraint, we must do it, one for one. That is very tedious work. It should be allowed to assemble several components by default constraint.
Currently a cosmetic sketch is hidden when behind another component in a 3D assembly displayed as shaded. A view of that same assembly paced on a drawing displayed as shaded will show the cosmetic sketch thru all surfaces. Sketches that are behind other components should be displayed as hidden the same on a drawing as they do on a 3D model. Reference case CS149095 and the views attached.
Scope: Flexible assembly When we define a varied Items Dimension, using Method "Distance", WWE can only select a plane and not request an offset. Workaround is to create an additional offset datum Idea is to integrate the offset to the function - see picture Regards
I was seeing the following video from NX, and I think the selection method, is quite good. https://youtu.be/flLVhBiyD2Q With this selection, is easier to select some geometry in our models.
Creo currently only allows the mirror constraint to vertices in sketch mode. Even if we select some arcs, circles and lines, and select the mirror inside sketch, the mirrored geometry per se, does not have mirror constraints, but instead, it's vertices get applied the symmetric constraint. While this is fine if the new geometry is not edited, ie, trimmed, extended, etc, it's rather annoing and time consuming that whenever we later in the process add fillets, chamfers, or trim and extend geometry, the symmetric constraints on the original vertices get deleted by Creo. There was some improvements with the option to fillet and chamfer, but keeping the original symmetric vertices and split the geometry between solid and construction lines, to avoid the annoying deletion of symmetric constraints whenever a simple fillet was added. Nevertheless, this does not solve all the common problems, whenever we need to trim or extend mirrored geometry. I suggest that the "Symmetric" const
It should be an option, to global interference to stop the analysis, if users want's. I have made a calculation with wrong inputs, and I'm unable to stop it. Know I have 2 options: 1-Wait, and restart the analysis, with correct inputs 2 - Force CREO to shutdown, reopen the projet and do the analysis. Both of them are not that productive, both of them take long time!
In interactive Creo, a user can replace one component with another, even when the replacement is not part of the same family table or interchange group. This is done by enabling the ‘Unrelated Component’ option on the Replace dialog (see attachment replace.jpg). We need the equivalent API support so that the replacement can be automated within a PDM system. If the replacement component is geometrically equivalent to the original, no user intervention should be required, and any constraints should be automatically reconnected.
Tried to weld two parts together. It seems that the geometry is not that simple.With a butt weld it works but if I trie to fill the gap completly when I try to fill the gap completely with a butt weld it does't work like expectedIt's depth is 14mm and it works only when I type in 13.99mm It's possible with this workaround to type in 14mm but you have to define a face offset of -0.01mm that it worksNot so nice for users to find this workaround.Is there a possibility for the programmers to make this easier?
Today, ModelCHECK has the ability to flag over-written drawing dimensions with the DIM_OVERWRITE option. This is a request for a similar capability for solid models. We'd like ModelCHECK to be able to flag driven dimensions on solid models that were manually overwritten. This applies to our drawingless data sets. We have internal rules, training, and practices to avoid this situation, but we'd like an automated way to verify that no overwritten dimensions snuck by.
Sketch Regions are now only available fit external sketches and this wat of working is not available in internal sketches. If available in internal sketches a lot of trimming has not to be done anymore. This maken sketches more stable and working more productive. Also areas may overlap. In that case simple click the areas which have to be extruded without having to create closed loops which do not overlap.
Analysis Features have to be one of the best kept Creo secrets. The ability to create patterns of Analysis Features (Lengths, distances etc.) would be beneficial from a productivity standpoint, even if it's limited to specific use cases such as being able to create a reference pattern from another pattern of features such as points... The most likely candidates would be geometry measures such as distances and lengths. Add in the ability to create repeat region reports (for X, Y, Z point measurements from a common datum coordinate system gets the Dev Team bonus points!!
Hello! I'm working in Creo Parametric 10.0 and I'm having some issues with Shrinkwraps. I'm trying to export large portions of a somewhat complex vehicle to STEP format for sharing with vendors. As our vehicle has become more complex, this has driven the need to share lighter-weight CAD with vendors, as exporting any top-level assemblies as-is (even with significant part reduction via simplified reps) can take hours. And importing the resulting step files takes even longer, and I don't want our vendors to have to deal with the ridiculous load times on their end. So, I've taken to shrinkwrapping, then saving those shrinkwraps as STEP files to share with vendors. This reduces export file size and import complexity, but one issue that I'm constantly having to workaround is our numerous harness/cable assemblies not making it into the shrinkwraps. This means I need to have our full harness installations (with connectors/backshells) included while saving the export, which massivel
Can we please get a config option that would automatically assemble the first part in the assembly to the default location?
Is it possible to adjust the scale factor of the catalog items with respect to the sheet size? For example, I have created a block shape with A3 as the sheet template, Now If I wish to insert the same block into another sheet of different size, for ex A1, the block appears to be small. If there is any option to add a parameter which scales up / down according the sheet size, that would alleviate the manual task of creating the blocks for different sizes. Please help me.
I am using Creo Parametric Release 10.0 and Datecode10.0.6.0I upgrade CREO 10.0 from 3.0But there has one bad thing. Not so critical thing. But it happened at 2D drawingat CREO 3.0 Xmark that from point by 3D mode. it was slim and look good..but in CREO 10.0 it is thick and it blocks my sight.
I am using Creo Parametric Release 10.0 and Datecode10.0.5.0I would like to know more about coloring surfaces.I design plastic molding tools and the customer wants the models colored in different colors, for example iso hole yellow inch hole purple.Now I have to sit and change everything manuallycan it be done so that I have it controlled in the config fileis it possible?Do you have any good basic information then can I make my own setup
Hi,when i am launching Creo Illustrate 8.1 the startup menu appears as normal. But when i click start nothing happens (Window gets closed). However, if i use an server with the license, it works fine.I also installed it on my backup pc and there it works fine with the file. So what i am doing wrong on my laptop? I have installed it for other people with exactly the same steps and it works just fine, but not on my device. I searched for a solution and found that you can generate a log file (also installed debug symbols accordingly to this post https://support.ptc.com/help/creo/illustrate/r9.1/en/index.html#page/creo_illustrate/install_config_guide/g_ttips.html# (Debug Symbos & using variables in troubleshooting))But i dont get smart out of it. Tried Illustarte 9.0 also but same problem. Merry Christmas and happy new year to you all,Steve
is there a option/way/process to select all hole references in Creo elements/direct modeling in one go to fix fasteners ? The Creo elements/direct modeling version using is 20.5
While using Creo with Windchill I am trying to run a trail file automatically (just to open the active workspace) after starting up Creo using the following syntax (not both lines work separately): start "" "c:\my location1\parametric.exe" "c:\my location2\trail.txt" start "" "c:\my location1\parametric.exe" -i:rpc_input "c:\my location2\trail.txt" Even though both work, both have a strange side effect where I lose my registered servers and I have to re-register them. What is even more strange is that it not only doesn't modify the .srv_mgr_db3.fldx file, I cannot find a file on my computer (or the network location where my batch file and other config files are stored) that stores the new server info. When I restart Creo my trail file runs, and my workspace refreshes correctly, but it uses my new server registrations and not my old. If I go back to using: start "" "c:\my location1\parametric.exe" It starts using my original server registrations. When I use a
This part was white in darkmode, so ugly
Hello everyone!In my company we have recently introduced Windchill and Creo 8 for our little mechanical office. We make machines based on Robotunits Modular Automation System, that means we use aluminum extruded profiles.Whats the best manner to manage this profiles? The minimum lenghth is 50mm and the max is 6m.We can use all measure between this min and max.I thought we can manage this with a family table where I let change only the length of the profile. But this means a table with 6000rows (one each mm).I don't thik it's the best practice.So I see on PTC support articles that it is raccomended (with the utilize of Windchill) a max numer of istances of 50.It's not so simple manage 6000 different length of profiles with 6000/50=120 family table..What can I do?
When creating a pattern in CREO 8, if the 2nd direction members were set to 1, the radial distance box would be greyed out and would not give any extra dimensions. In CREO 10, this box is always active and always gives you an extra dimension. Is there a way to prevent this new extra dimension?
Made this curve through points, it supposed to be a conveyor belt When i tried to make a simple sweep, drew a rectangle at the starting point, it swept it along the trajectory by rotating the rectangle, based on the curve's direction. So the rectanlge didn't remain normal , and I couldn't figure out which setting to use So the question, how can I make this sweep, so the rectangles sides stay normal to something, and doesnt rotate? Or is there an alternative way to do this? I just want a rectangle section along the curve Here's the file : files.fm/u/dpqvzrxw# Thanks!!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.