Recently active
The functionality "cutting tool Adapter" is only available for milling sequences. Please add this for turning too. I referee to article CS285074
For example for trajectory NC Sequence while defining a connect tool motion the NC parameter tip_control_point is unavailable. In turning it´s also often not available. Please add this Option to all tool motions I referee to article CS285095
Add the ability to format (colors, dimensions, font ecc...) and customize (add symbols and descriptions...) notes related to Creo Product Insight Sensors. They are not reflecting the format described in the 3D dtl file, generating a non uniform MBD representation. Please enable the "sensor parameter note format" variable in the config.pro.
Hello Team, Just an idea for Creo parametric to work on internet. No need to install Creo licence in any machine. PTC will have all Creo license files in cloud and user has to get it thru PTC login. This is very high level option to go. Thanks, Jitu Thakor Cell: +91 968 763 1627
We have drawing formats where there are model parameters linked to the title block cells. Many users end up accidentally removing the parameter call outs in their drawing (like &PROI_REVISION, &DESCRIPTION, etc) as they attempt to edit it. The models end up getting released with these broken links because the approvers/managers are not concerned about this. However, the admins are. We end up with parameters or attributes in Windchill either missing or incorrect from this. Can we have a way to lock the cells where they can't remove the parameter, BUT can still edit the value of the parameter? Thanks!
Hello, It would be very nice to have some thumbnails from model instead of icons for saved and default orientations in CREO parametric. This, to be able to select directly correct orientation instead of trying each orientation to find the one we want. Regards,
When exporting the parameters into an XML file please export the column "Designated" too. Other Columns like locked and value etc. are already exported.
Creo 3.0. Please allow groups, patterns and stand alone components all to be resumed together in an assembly. I currently can only resume patterns with other patterns. I cannot select a stand alone component and a pattern at the same time and resume together.
It would be great if the icon color of all features were consistant, so that all features which results in solid geometry were blue, and all that results in surfaces were purple. Example, the extrude feature is blue when solid geometry is extruded. Likewise purple when a surface is extruded, still using the same icon symbol. This would give much more clarity what is happening in the model, especially when fixing failed features.
Creo 4.0 introduced support for the AMF file format. It left out the most important feature of that format however. PTC says the current functionality is working to spec. This idea is to support the full implementation of curved triangle. This feature more accurately represents curved surfaces: I am aware you can reduce the size of the tessellated surfaces. Curved surfaces would reduce file sizes while at the same time more accurately represent the original geometry.
Please add the ability to show max or min Stress, Strain, Displacement value by selection box similar to other FEA tools to Creo Simulate. Say you need to show the max value for stress in 5 locations on a part in one view. The time it takes to do this with the Dynamic query tool take to long and may not show the highest or lowest value in a given area. Thanks, Don Anderson
In cases a model is saved in a higher revision of Creo it can not be retrieved. Currently this message will not offer the reason why and it can be different. "can not be retrieved" will not really offer the user any idea why and it should be implemented a mechanism to interpret models saved in a higher version to offer text. "Model already stored in a higher version and can not be retrieved anymore."
We would like to use motion envelope function for making assembly fixture or test fixture because the subassemblies are embedded in a fixture. The way is just similar with doing a vertical kinematic motion. By, doing so, it will save a lot of time on remove surfaces on the vertical direction. However, the elements which was generated from Creo motion envelope is too rough even through I have adjusted the quality to 10 (the highest range). Is there any way to adjust configurtion file to make the trianglial element smaller? Or can PTC makes envelope quality adjustment level higher. We really don't mind that computer takes longer time in calculation.
Currently when you have several combined states and appearances (colors) in each one of these, only the appearance activated during the STEP AP242 export is saved.So when you open the STEP AP242 there is the same appearance (the one activated during the export) in each combined state.Creo should export correctly appearances on combined states with a STEP AP242 export.
Currently when you have a model (with flat to screen annotations) exported in STEP AP242, the flat to screen annotation isn't correctly saved.Indeed when you the STEP AP242 the annotation can move with the part so this no longer a "flat to screen" annotation.Creo should export flat to screen annotation correctly in STEP AP242 (part of the MBD Definition)
When you create a combined states you can rename it and then put it in a specific order (example : Section - front view - Left view) But after a STEP AP242 export, combined states are saved in the alphabetical order (example : front - left - section) so the STEP export lose the order we want to display combined states. Creo should export combined states order correctly with a STEP AP242 export (part of the MBD definition)
When a 3D model with hatch on a section (and the section is part of a combined state) is exported in STEP AP242, then when you open the combined states of the STEP AP242 hatch won't appear on the section. You have to activate hatch manually by : right-click on the section -> edit the definition -> display hatch pattern Creo should display automatically hatch on a section after a STEP AP242 export (part of the MBD definition)
Currently when you have several combined states and different simplified representation in each one of these, only the simplified representation activated during the STEP AP242 export is saved.So when you open the STEP AP242 there is the same simplified representation (the one activated during the export) in each combined state.Creo should export correctly simplified representation (for a .Prt AND an .Asm) on combined states with a STEP AP242 export.
When you create a combined states you can rename it and then put it in a specific order (example : Section - front view - Left view) But after a PVZ export, combined states are saved in the alphabetical order (example : front - left - section) so the PVZ format lose the order we want to display combined states. Creo should export combined states order correctly with a PVZ export (for the MBD definition)
Currently when you have several combined states and different simplified representation in each one of these, only the simplified representation activated during the PVZ export is saved.So when you open the PVZ file on Creo View there is the same simplified representation (the one activated during the export) in each combined state.Creo should export correctly simplified representation (for a .Prt AND an .Asm) on combined states with a PVZ export. (for the MBD definition)
When you export a 3D model in a STEP format from Creo, it's possible to parameter data exported by using the step_profile_export file (see photo attached)It works correctly on Creo Parametric but when you use a CAD Worker, the step_profile_export file is not supported ! So it's impossible to choose which type of data(annotations, datums, ...) should be exported with the use of a CAD Worker.This is a problem hinder for a company (using CAD Worker) which want to use the Model Based Definition and thus archive STEP AP242 model with 3D annotations.
Maintain the currently active drawing background settings when entering print preview mode. Don't switch to white!From CS184887
Allow one Creo process to work with multiple and independent sessions. It could exist a session manager too. With this resource will be possible to open and work with different versions of the same file without interference. Today is only possible do this oppening two licenses. In this way, it should also be possible to connect with different workspaces at the same time without interation between the sessions.
Like common spreadsheet programs, it would be nice to have the prompts displayed as seen below for the syntax that Creo is expecting when writing a relation.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.