Recently active
If the length of the extension line is the same, we want the horizontal dimension and the vertical dimension etc. to be able to tilt the dimension line. In that case, there is no problem even if it is changed to parallel dimension.
Even if a MI file of the old version is loaded, please can renew
To set the ratio of character width to height would be helpful.
Measures at the part level can be defined to be 'visible at a higher assembly level', however they only appear in the analysis results afterwards... It would be very convenient that they are indicated in the Measures dialog box at the higher assembly level (e.g. checkbox option to show them as greyed out).This provides a good overview on the top level, can avoid the need for another run and or the creation of duplicated measures at multiple levels.
The end point of "Ref Line" command must specify on an entity. I want to specify the end point empty area. CED Drafting can specify the end point empty area.
3D access should also support the Granite option
We need a default radius by the function "New by Solid" in the modul SheetMetal. Sample: - Steel 2.0 mm, DC01 - Prozess Air Xpert Radius 2.912 many thanks Urs Ammann
Update File server status links to show complete downtime not stop at two hours. Attached you the snap.
update from IP to the entered name of the file server from setup page. Attached you the snap.
Workaround: "new drawing" before open in Creo Elements / Direct Modeling. Following CASE 13231615 and SPR 6229403 and ARTICLE CS250225 . For ptc it works to product specification.
Workaround: "Disable uwgm module" Following CASE 13478414 SPR 6604627 and ARTICLE CS260235 that was closed with: Works to product specification for Windchill Workgroup Manager for Creo Elements Direct ModelingTo request a change in the functionality, refer to Product Ideas @ PTC Community
Following CASE 12797071 SPR 5722083 and ARTICLE CS239000 closed with:Works to product specification for Windchill Workgroup Manager for Creo Elements Direct ModelingTo request a change in the functionality, refer to Product Ideas @ PTC Community
This command "Mark as a library element" exists in Modeling with ModelManager, but not with Windchill. Yet, after migration from ModelManager to Windchill, the "marked as a library element" parts keep this function. It is very helpful when an assembly is copied with "One Level" option not checked: a new assembly with new parts is created, but all the screws, nuts, ... (all part "marked as a library element") are not copied, but shared. Remark: a part "marked as a library element" keeps this function even when Modeling is not linked with ModelManager or Windchill. It seems that this function is a Modeling function, no a database function. The idea is to create a command in Modeling "Mark as a library element". It is not necessary that it is linked with Windchill.
Working with big assemblies with BomEditor make that the cahce needed was increased and you can hang up ModelManager if not close and open it to free memory. We can add more cache increasing in run.bat file: set JVM_ARGS=%JVM_ARGS% -Xms50m -XmxXXXM but it not be enougth. It should be good to optimize the cache or to have any action to free cache.
Currently the Quick Search tool in Model Manager only searches the Unique ID attribute and is not customizable to include additional attributes (ie Drawing Title, Description, etc). The Quick Search tool should search across more attributes or should or at least be customizable to enable this.
Good morning, As per the title I would like to suggest the possibility of being able to insert the name of a texture in a table. In this way you would no longer have to manually insert the text of a finish, but everything would happen automatically. Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Buongiorno, come da titolo vorrei suggerire la possibilità di poter inserire in nome di una texture in una tabella. in questo modo non si dovrebbe più inserire manualmente la scritta di una finitura, ma avverrebbe tutto in automatico.
Position 3D with Option "transform owner" doesn't work for (in MM) unreserved assemblies if you select in the viewport by selection frame. Then all selected parts are excluded whose owners are unreserved in MM. Correct would be to first check which owners should actually be moved and only then check which parts are unreserved. With the Modify 3D command the same option works correctly. So the position command should be improved in the same way.
It is useful to select an assembly to display a list of properties (such as mass) for subassemblies and individual parts in the assembly.
When double-clicking a large assembly, the selector will be activated and all edges will be selected (and highlighted). This is currently the only mechanism being implemented and – unfortunately – there is no parameter available which can reduce the selection to visible elements only.
Sometimes we work with large assemblies at the root in a single Modeling session. We can manage the drawlist on several viewports separately but not with the "Set as Tree Root" command. We have to scroll vertically to find the right drawlist when going from one viewport to another.
An animation was created using AdvancedAssembly Customer need to make zoom movement on some models areas to show some details This is not possible
Can "Clip Planes" be used to view internal surfaces (not inside the material - just an internal surface i.e. a cavity in a body)? If not, would this be a feasible "Product Idea"?
It should be possible to display type info of drawing (Owner or Component) when showing drawings as children of the model in Model Manager Workspace like it is possible to display that information in ths "Drawing Status" tab of the Db-properties of the model
Following CASE 13024070 SPR 5660423 and ARTICLE CS236668 Works to product specification for Windchill Workgroup Manager for Creo Elements Direct ModelingTo request a change in the functionality, refer to Product Ideas @ PTC Community
In CED Modeling the menu for a 3D Curve -> Spiral 3D/Helix has 3 types, Helical, Conical and Planar as a pull down in the same menu. For the Helical option, there is a 'Right Handed' option, but for the Conical helix, this is not available - can it be added as per the Helical curve*. --> NOTE: There is a workaround, by reversing the axis direction and set the pitch to -ve values - but it seems that this could be achieved within the menu, and that the functionality is already there!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.