Recently active
Enable Weld Features Creation directly using Element trees in Creo Parametric In Vestas product , most of the places we have to create weld. It is taking more manual time & reducing quality of product if wrong weld is done. To avoid this we are planning to automate weld creation. It will improve the business. Could you please help as to solve this .
missing this to show fastners.
Placement of GD&T frames should be allowed to be placed below a note (especially a hole note). Just adding &gp{#gtol#} is not sufficient, because there is no semantic query, and you cannot then erase the standard GTOL display without also erasing the hole note from display
I have a suggestion regarding the graphics performance of large assemblies. I noticed that the graphics performance of Creo View is way better than the performance of Creo Parametric. This goes for both mouse spinning and spaceball spinning. While a large assy is loading in Creo, the user sees a 3D preview that is zoomable and spinnable; I suppose that this is a Creo-View-kind-of-lightweight-Viewable embedded in the prt's and asm's. So, what if Creo would momentary switch to a Creo View-like graphics mode whenever the user touches the spaceball, and switch back to "real" mode if the user lets go of the spaceball? I would expect that this would be fairly easy to implement, because the lightweight data is probably there in memory, and the current camera position is also known. It would dramatically enhance navigation within large assies. Second suggestion, also very convenient in large assies: I've seen that other 3D CAD programs often have a Dice-shaped navigation tool in the corne
Creo has drastically more clicks throughout the interface, then Solidworks. The interface should be more intuitive, with alot less clicks.
See article https://www.ptc.com/en/support/article?n=CS287389 PTC brought back the note properties within a drawing because many users felt it was easier to edit a note than within the note itself. However, when using the new ASME and ISO symbols, the TEXT SYMBOL box within the note properties is grayed out. It would be great if it wasn't so users can utilize the note properties to its fullest.
It should not be regenerated automatically after every change, but at a time that the user himself determines.The regeneration certainly takes fifty percent of the construction time.This time could be dramatically reduced if one could make several changes in succession without regeneration. An example: One part has 300 draft angles.You change the first, after all the following 299 are regenerated.You change the fifth, after Burzigung all subsequent 295 are regenerated.and so on.This costs an incredible amount of time - completely unnecessary.
While it is possible to create a BOM (repeat region) with quantities listed for various forms of an assembly (lets say that the housing color changes, requiring different housing part numbers for each assembly variant), it is IMPOSSIBLE to create BOM balloons that are parametrically driven by the BOM table. This is EXTREMELY unfortunate and seems to cause a lot of headache. While there is a "work around" using non-BOM repeat regions to list part numbers based on the family table, this is cumbersome and not inline with industry standards. The alternative is to have a separate BOM for each variant, but syncing the item numbers becomes a manual process (very error prone) or to create balloon notes manually (again, very error prone).
It should be possible to delete all selected elements and everything else with the remove key.In addition, multiple selection using the shift key should be possible in all windows.An example:In the Area sets selection window, the elements can only be selected individually by mouse click and can only be removed individually with the right mouse button.This is extremely awkward.
It should be possible to turn off all hint windowsIt is very annoying if you always have to confirm the error messages when saving.It is quite sufficient if the errors in the model tree are highlighted in red.
Could be more simple. Why not do it on the drawing? instead of the need to open the model. Take a look at Solidworks way of making it. More simple, takes less time. click section view click were you want the cut. click were you want the view. done!
it should be absolutely possible to change the font height when modeling and constructing.She is set too small.
In certain Creo operation, you need to define references in a set, e.g. when creating round, you define one or more rounds. Creo automatically creates a set of references with the same properties. Now, if you want to define different properties on one of already selected references, you need to remove it from the set and add it to a new set. In case, you need to remove more than one reference from a set this takes a lot of effort, since you need to select each reference, right-click it and Remove it from a set. Idea for improvement is to add additional command to pop-up menu when you select a reference in existing set, which would allow moving of the selected reference to a new set. E.g. you would select a reference, right-click it, the pop-up menu would appear and by selecting Move to a new set, the reference would be removed from existing set and moved to a new set. In a new set, you could then change the properties of the newly created set. This would save ti
When a feature is created which enables set of references, those can only be selected and then removed one at a time. E.g. when you create a round on multiple edges, each edge is listed as a reference in the same set. If you would like to remove edges from the set, you need to right-click each one of the edges to be removed and select Remove from the pop-up menu. When you want to remove many references this takes a lot of time and effort by right-clicking each individual reference. Idea for enhancement is to enable selecting the references in a set by using CTRL or SHIFT and then carrying out operations on selected references. This way you could select more than one reference by holding CTRL, then right-click them and select Remove from the pop-up menu.
3D model (.prt) : tolerance on the EDGE -> 2D drawing (.dwg) : POSSIBLE to move the tolerance on the drawing (see video) 3D model (.prt) : tolerance on the SURFACE -> 2D drawing (.dwg) : IMPOSSIBLE to move the tolerance on the drawing (see video) It should be possible to move a tolerance on the drawing when it's positionned on a surface in the 3D model !
Change functionality to expand folder tree by default. Reference CS189390.
When an assembly (with combined states on Creo 4) is exported as a STEP AP242 file, combined states are not exported. So it's impossible to see combined states on an assembly with a STEP AP242 export although it's possible with just a part. A STEP AP242 assembly export with Creo shoud work correctly (lcombined states exported, like with a part) !
We have a shrinkwrap with one specific color and we use copy geometry to bring in the geometry into subparts. Every time the geometry in the shrinkwrap updates, the colors of the shrinkwrap override the destination colors. The colors are important since they may to materials in keyshot. Please let us have better control over these colors being imported through copy geometry. Thanks!
As we are able to change dimension lines and witness line in 2D drawings in PDF or DWG file when we export them. Their should be an option doing the same for the 3D items when export them or while they are being rendered into an image file.I have attached an example were you can see the dimension seems to be distorted and very light
It would be great to have a config Option to enable the Rotation about the first axis for Punch Forms by Default. In Creo 5.0.0.0 you first have to place the Punch Form with two handles, then open the placement menu, check the Box and enter a value. This is way to complicated when many Punch Forms are needed.
As i understand, this can only be done in the drawing. An option in the assembly to exclude the part/subassambly would be perfect!
It would be good to have a parameter, option or whatever to check/uncheck automatically "Keep ID in sequence", especially when you have 100 welds in an assembly and want to check/uncheck this box on ALL welds.
For models, created with Pro/ENGINEER Wildfire 3 (tested also on Wildfire 4), pitch circle diameter on the drawing view with or without cross-section, where the hole of the pitch circle is positioned half of the pitch out of the plane of drawing view, was represented correctly, i.e. witness lines of pitch circle diameter go through the axis of the hole (see PDF attached, hole in question circled in red). For model and drawing, see attachment "flange_wf3.zip". This functionality was changed back in version Wildfire 5 and remains changed in Creo 4. Change in the functionality forces for the pitch circle diameter to be represented "as is", i.e. when showing the same pitch circle diameter on the same drawing view, where the hole of the pitch circle diameter is displaced from the drawing view plane, the witness lines of pitch circle diameter are offset of the axis (see PDF attached, hole in question circled in red). For model and drawing, see attachment "flange_creo2.zip". &nbs
Hello, Sir, I wonder if there is any command or option that I can make a group of few parts rather than the assembly relation and while I want to move the parts I don't need to select one by one and to move them. " just select the group and move whole group. so is it there any option that I can use it now. or maybe chances to look it in the further updates? please find the attachment. Thank you!!!
Parameter values from a STEP file fail to import if 'use templates' is enabled and the template model contains matching parameter names. The whole point of using template models is to make sure that all planes, views, and parameters exist in every model. Using a template during import shouldn't block the parameter values from being transferred in.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.