Recently active
The Sheet metal notes do not contain the bend radius automatically. A user could manually add them via parameter, but this is not practical. - at all. The Bend Notes can grab the bend angle and the direction automatically, but not the radius? SolidWorks notes contain the radius. We do have parts that have different radii bends., and nearly different radius tools. What good is a note that contains only partial information? In order to accommodate existing notes and drawings, use a config option to control the showing of radius or not. Defualt to no.
Dear all, I would like to save users two mouse clicks and movement by automatically having the value of certain features (for instance value of a Round, Chamfer, Extrude, etc.) be selected after placing the feature. Now, one has to either find the value in the model and double click it or go to the Dashboard and double click before being able to type in a number. Hopefully more of you see the... value (sorry) in this, I'll appreciate the vote.
When activating a component in assembly and taking references in sketch mode (when several edges or surfaces are coincident), it would be GREAT that the system would : Prefer / Privilege active component references before other component Prefer / Privilege intent references Prefer / Privilege vertical surface references rather than edges Active component intent Active component surfaces Active component edges Other component intent Other component surfaces Other component edges
Please add the ability to have a different Model Tree in Assembly Mode versus Part Mode using the mdl_tree_cfg_file config setting. It often doesn't make sense to display the same information in both model trees. Please watch the video below to see the idea explained. This video has been deleted(view in My Videos)
If I am working collaboratively and publishing many quilts it would be nice to have a dashboard to be able to see all published elements, re-name and re-define them. Similarly in a part with many imported publications it would be helpful to see a list of imported publications and easily re0route to a different part. This is done vary well in Catia, at the moment we cannot work collaboratively (ie sharing data between many designers) in Creo in the same as we do in Catia because there is no way to easily manage the publications coming in and out of the part.
When generating a mass properties report in Creo the format is terrible. It is sometimes hard to tell which number is the mass, density, or X CG at a quick glance. I just want the ability to export the mass properties in excel so that I can quickly sort the components by mass or filter components with negligible weight so I can review what I feel is important. The file that creo saves out is just a pain to work with. I feel I have to manipulate every value to a cell to create a decent readable report. You need to fix this!
The VG 95001C standard requires a parts list on the face of the drawing that is linked to an outside source. The source may be Windchill or SAP. Working with new program for the German Defense industry requires the VG 95001C standards for the drawing and design.
Creo 5.0 Drawing Datum Feature Symbol should check to see if a Model Datum Feature Symbol already exists. Scenario: - A datum was created in the model and shown in the drawing. It could be old style "set datum" or a Datum Feature Symbol created in the model. - If you create a drawing Datum Feature Symbol, it does NOT check for duplicity in the model. You could have two datum A's showing in the drawing on two different objects. - This renders datum name check very ineffective. BTW...It seems that the industry BKM is to create all Datum Features Symbols in the model, but I have two comments regarding that... 1. Then you have to show or create Model Annotations if you want to attach the Datum Feature Symbol to a dimension. This is more steps. 2. The new functionality in drawing mode to create drafting Datum Feature Symbols is in your face and so, so easy. Our users are going to do the easy way no matter what.
Currently in Creo 4.0 M060, It is difficult to get a Datum Feature Symbol to snap to outer boundary edge. You must zoom way in to get it to drag out. PTC's response: Per our discussion, we followed up on SPR 7076344 and its closed as works to product specification for Creo Parametric. A change in functionality is being considered for a future release by Product Management but no timeline can be committed to at this time. To request this functionality, refer to Product Ideas @ PTC Community As a workaround, we suggest to use Sketch, create a draft line on the required silhouette and place the draft DFS on the drafted line. Note their recommended workaround Create DRAFT entities. Please improve the functionality of working with GTOL features. We did not have near the problems with GTOL's in later releases of Creo 2.0 or Wildfire. I understand changes needed to be made for MBD but many of us are NOT using MBD, our customers still require 2D drawings.
In TOOLKIT, a character string obtained using ProDwgtableCelltextGet() includessplitting the line by text wrapping. ProDwgtableCellNoteGet () is also the same. Text wrap is necessary due to display convenience. However, in order to handle string data accurately, it is necessary to acquire original data that is not affected by line feed at the right end of the display, just like the UI property screen.
This is a little hard to describe so please see the attached image. Often times a model datum point is used to precisely locate a datum target. When a datum point is used the orientation of the target area and symbol is defined by the annotation plane. Sometimes in order to best show the datum targets in a combined view the desired orientation of the target area and symbol are not the same but there is no option to specify them separately so your forced to choose one. The request is to add an option to specific a plane (surface or datum) for the target area when selecting a point to locate the datum target. When placing a datum target on a surface (no point selection) this works as desired because the surface defines the orientation of the target area and the annotation plan defines the symbol orientation.
There should be an easier way to split up family tables. I know it's possible, but it's very delicate and procedure intense. One wrong move and you have to start over or you've broken your models. This holds especially true within a Windchill connected system. It's an old topic, but I couldn't find a similar idea so I'm posting it. Requesting native and easy of use ability for: Splitting 1 family table into multiple, separate tables I would even be OK with a parent/child setup if the workspaces didn't have to pull in the parent generic. Divorcing instances and making them their own components Has to work with Windchill functionality Our use case: Bolts. Somewhere back in time a family table of simple bolts got created. Then a material got added, then more lengths, then added features. Now the table sits at over 7000 instances, and it's not alone. Other similar tables got created. We've since tried to reduce this habit and start making multiple family tables by unique
Dear Sir , I have clients who are getting parts from Tata Motors division in Catie format.They are using creo software for importing and using the design for downstream activities. Since tata Motors has upgraded their Catie version to V6 R28 but as per the creo compatibility matrix , we cannot import Catie file since we are supporting only upto Catie V5. Request you to look into this asap. Regards, Rahul Sardar Santi Software LLP
Hello, Actually, if we want to know the total mass of a model in Simulate, taking into account on the beams, shells, and mass elements, it is necessary to run an analysis. The total mass is given by the study status file (.rpt), at the end of the calculation process. This can be (very) long, depending on the size of the model. Is it possible to add a feature, able to calculate this total mass? Without running an analysis? This is available in most of the calculation software… Thanks
Hi, please make some configuration option to switch on/off new beahvior of force placing ordinate dimensions to one side of view. Old behavior of placing ordinate dimensions (before creo 4) was much faster. By the way old behavior of placing of all dimensions without pressing CTRL was much better. If it is possible, please make some configuration option to swich to old behavior before creo 4. Thank you! Similar topic: https://www.ptc.com/en/support/article?n=CS258116&language=en&posno=3&q=ordinate%20dimension&Product=Creo%20Parametric&Release=4.0&source=search
Up to Wildfire 4 it was possible to select annotations (dimensions, axis, ...) during the show / erase dialog by using a selection box. User was able to select an area with a rectangle. Since Creo the new dialog does not allow or support this procedure. User must select or deselect each item in an area by mouse click. Would be nice to have the old feature again.
Hello, we have an option to release/catch floating modules online but would be nice to do it even with standard (startup) license. We have many batch files with a specific configuration to run but it is pain when somebody realize more advanced license is necessary (like you run standard Creo but suddenly need advanced assembly so you must save whole work, shutdown Creo and run advanced assembly license). Think gonna be great to run Creo always just as a blank license but have all other modules as floating and just choose what you want and release/catch it anytime...
Should be able to output vector file format from CreoVeiw. It used to be available. Here is an article: https://www.ptc.com/en/support/article?n=CS265497
When defining partial drawing view, besides the view boundary reference point you also need to sketch spline-shaped view boundary. Product idea is to have, additionally to the spline boundary, also predefined boundary shapes available, e.g. circle, square, rectangle (with possibility to create your own or even to load them from the sketch library already available in Creo) not to sketch spline everytime, where you might need only rectangle. Shapes should be modifyable in a way to be able to either drag corners to deform rectangular shape and to drag sides or arcs and not to loose rectangularity (similar to *CAD Box object). Spline shaped drawing view boundary (currently the only option) Rectangle shaped drawing view boundary Circle shaped drawing view boundary Ellipse shaped drawing view boundary
Currently in drawings only basic draft entities are available to create draft items, i.e. line, circle, ellipse, arc, etc. Product idea is to have sketcher pallete, the same as in Sketcher module, also available for sketching draft items in drawings. This way it would be far easier to create polygons such as rectangles. Draft entities should be modifyable in a way to be able to either drag corners to deform rectangular shape and to drag sides or arcs and not to loose rectangularity (similar to *CAD Box object).
Após inserir a primeira vista no desenho e configurar a vista com linhas invisiveis, linhas de tangência e outras as demais vista gerada do pai deverão vir com a mesma caracteristica da vista principal já configurada.
Currently there isn't a way to easily replace datum references without the datum moving. It would be very helpful to allow users to do one or more of the following: add a new redundant reference(s) with automatically calculated offsets, etc. and then delete the old reference(s) freeze the position of a datum, delete old references and then add new references with automatically calculated offsets, then remove freeze allow users to replace references without the datum moving automate the elimination of external references for datum features This new functionality needs to support internal and external datum references. NOTE: This new functionality is similar to what can be done with component placement references.
Allow users to copy/paste ribbon tabs, groups, items from one ribbon mode, location, etc. to another.
We can not get or set the size of a custom symbol arrowhead using Pro Toolkit API, so symbols created via API may have incorrect leader arrowhead (too big or too small)
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.