Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 92. What is the problem?For many years in an effort to cater to inexperienced people Creo has a lot of workflows that are very clicky, despite significant improvements I would argue we have to do too much mouse movement. 3. Are you using a workaround? If yes, please describe it.No, 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In version 1. Creo will have a mode where you can toggle it on/off from the toolbar and it will listen and help you execute common workflows. In version 2 Creo will advise me i'm doing stuff outside of historical norms and converse with me whether i would like to make it standard immediately.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This is wo
Creo 8.0.11 why there isn't the possibility to interrupt a bigger analysis (eg: LDA) to restart it later?Someone may post it into the IDEA section?
Creo 8.0.11 The usage of "to ground" springs is not supported in non linear analysis but linear one is permitted. So I want better understand the main difference between them. SIMPLE You can write a function to establish the relation F=k*x. Only one constant for linear and rotation movements; so if I want the point forced not only in 1 direction, I must lay other springs. It required two "supports", two ends that gonna be linked with spring. TO GROUND You can write a matrix with different direction constants.Only one side of "ends" to specify because the first is obviously the ground and it's not required its specification. ======================================================================================================== QUESTION: Large Displacements Analysis --> why the solver give me an error if I want to replicate a ground sping with a simple spring linked with point and surface?The first one, the "like ground one", is a point external of the
原来软件中,在截图画圈位置会有:无、常规、打断边、孔和轴的选项,现在为什么“孔”和“轴”的选项消失了?如何解决这个问题?谢谢!
Version: Creo Parametric 10.0.4.0 I am trying to use the updated Manikin models. When I try to move the manikin model Creo requires that I have access to some of the sub-models. This makes using the manikin models more challenging. I can move the manikin model around, but if I try to edit a joint, then manikin requires access to the lower level assemblies. If all the models are read only, I can't continue. The manikin model should need to write access to these lower level assemblies. (view in My Videos)
Hi communityI drawing 2 part:shaftHubI want to linked it with gear teeth (involute profile)i drawing involute on shaft and hub with the same parameter when i assembly shaft and hub i find low profile decal. in the hub, i use a simple function for cut teeth profile in the shaft, i use un sweep function perhaps this decal come from sweep ?i am sure of my involute anyone have an idea ?
Primary Goal:To export specification-driven piping and piping components that were modeled in Creo 8.0.3.0 as a Piping Configuration File (PCF) that can be opened and modified in a pipe-stress analysis software (AutoPIPE, v 23.00.00.230). Methodology:Piping is modeled as Spec-Driven per Creo Guidance and YouTube Tutorials, and pipe components are similarly modeled per Creo Guidance and YouTube Tutorials. To export Creo model as PCF, Creo guidance is again followed. This process has been tested and proven to be able to export complete pipeline PCFs that can be read/interpreted by AutoPIPE. Problem:The PCF export of some (but not all) pipe tees is encountering errors when following this methodology. During the export process, the coordinates for the center location of the branching member of the tee are shifted to instead read as the coordinates of one of the end points of the tee, as shown in the diagram below: One might assume that the reason for this issue is
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 8.0.7.0 and 9.0.4.02. What is the problem?The material library tool need to include the capability to filter based on material properties. The increasing ease with which mechanical analysis can be done in Creo makes the material library increasingly important to compliment the analysis capabilities. A material search tool should be able to search and filter a user definable range of properties. Similar to many online resources, the user should be able to define a range of acceptable densities, Young's Modulus, user define parameters, etc..... Also, if the file explorer could show more of the file parameters as columns, that would also be helpful, so that the users can quickly scroll through the files and see what is available. 3. Are you using a workaround? If yes, please describe it.1) External database2)
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 8 and 9 & Windchill 12.2. What is the problem?Creo Parametric drawing mode offers the "Compare Sheet to Picture" and "Difference Reports", but these don't work well when in a Windchill environment. This is because you can only have one iteration of a drawing in your workspace at one time.3. Are you using a workaround? If yes, please describe it.A user must first download the old version of the drawing into a workspace, generate copies or .pic files. Then go open the new version of the drawing. Then the drawing comparison tools can be utilized. This process must be completed carefully to ensure that the "old" version added to the workspace precisely matches the version which is stored in WindChill or else the comparison could introduce new errors. 4. What is the use case for your organization? Describe how your idea
I'm curious if the ModelCHECK Teacher function is working in current versions of Creo Parametric (8 and 9). If so, is anyone willing to share some success stories with the tool? I was thinking about using the Teacher function by customizing the web pages to point to internal command media and relevant training resources. But I'm having a hard time even confirming the tool is working in the stock configuration. Its possible we have an option miss configured. https://support.ptc.com/help/creo/creo_pma/r10.0/usascii/index.html#page/model_analysis/modelcheck/add_info.html# If I click on the error notification, ModelCheck appears to try to open an information pane, but its just a blank box with an "X" Best Regards, Nick
Im using Creo Elements Direct, when i press this part the cursor is not straight.How can i change this? Creo Elements/Direct 20.2.1
Can anyone help me convert an .STL file into solid geometry in Creo?
When importing a sketch in the extrude process, the center of the sketch is always in any other point than the center of the sketch -- not even on the middle line of the sketch.In this example I wanted the center where the red dot is, but I could not drag it there, or change its position in any way. Is there a possibility to edit the original sketch and make the center be in the very middle of the sketch by some procedure?Or is it something that can be done here, in the extrude, to move that center wherever it is needed?
Some of the biggest changes that need to be done:Use a color coded syntax editor right there in the relations. Currently each user can export them, and then customize using a text editor such as Notepad++. Although some users ( Edit Creo Relations with Notepad++ instead of the default editor ) have worked on this and actually made some substantial progress for the basics, it would be much more useful if PTC built it into the software as well as expanded on the visual display/capabilities.Improve debugging to better point to errors and more focused troubleshootingAbove are some basic bare minimum improvements to get the relations editor out of the 1980's DOS mentality. A more advanced feature improvement to make the editor a lot more useful would be to provide dropdown menus as you type such as Excel or Visual Basics does. For example, Excel shows the syntax of each function which dramatically improves how fast people can learn and write useful code/formulas (from year
Hi,I've done a relation for chose the constraint set of a component in an assembly.The relation works well with the component.The component constrained is the leader of a pattern of two items.When I change the leader constraint, the other item should modify his position simmetrically w.r.t. a central plane, so I've done a direction pattern with the dimension twice the annotation distance between the component and the plane of simmetry.When I chose the leader constrain, I have to edit the pattern feature to regenerate the position of the other item: how can I update the simmetrical position of the other item without edit the feature pattern? Thanks in advantage.Best regards, Michele Barile
Is there any way to have a cursor select setting that only selects top level components in the structure in Creo View MCAD (aside from the top level assembly)? Any type of solution to this will do. (Creo View MCAD version 11 being used).
1. Describe the ProblemDesigning Multi-Level Cables within the current tools, Schematics & Cabling are not intuitive and difficult to implement. We, the Technical Committee, would like to see this process improved within the software.2. Are you using a workaround?There are multiple work-arounds related to the design of Multi-Level cables in Creo/Schematics and Creo/Cabling. The attached process is what is used at Northrop Grumman. Others exist at for other companies.3. What is the use case for your organization?Twisted/Shielded cables with additional layers of outer shielding is the definition used at NGC for a Multi-Level cable. Their use in Aerospace and other industries are growing as data speeds increase.4. What impact does this problem currently have on your organization?The attached work-around is cumbersome and error prone and at times works against the current software functionality.
I need PTC community team help. I want to convert a solid model of the attached data. please help regarding this.
Wouldn't it be nice to be able to select a Body when defining a simplified representation? Would make it easier to show on a drawing for instance.
How is it possible to load a Creo Elements/Direct Modeling part or assembly into Creo Parametric, or to incorporate it into an assembly, if the part/assembly was created in Creo Elements/Direct Modeling with a large offset from the zero point in Creo Elements/Direct Modeling? What I have noticed is that when importing without preselecting a profile, the positioning fills the screen and the CAD file is displayed. (This is identical to the normal opening of the file)(view in My Videos)(view in My Videos)However, if you select a profile when importing, the CAD model is somewhere in 3D space and cannot actually be found and therefore cannot really be positioned. You can only find it if you search for the solid geometry somehow (see picture).(view in My Videos)Hence the question, how can you load CAD models from Creo Elements Direct Modeling properly via UNITE Technology in order to find or integrate them?We actually only a "quick and dirty" Creo Parametric 10.0.1.0 standard installati
Hi, How can I check the date code in Creo 8.0.8.0 software?In previous versions, when we open "About Creo," it would show both the version and the date code. However, in Creo 8.0.8.0, it only shows the version(see attached image). Please suggest where we can find the date code.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?All version of Creo Parametric with AAX2. What is the problem?Modify the image of "Copy Geometry", "Copy Geometry external" and inheritance functions based on the update control.Allows you to quickly identify whether external links exist or need to be updated without having to edit the definition of each function.3. Are you using a workaround? If yes, please describe it.Add "Update Control" columns in model tree.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
We have conic Sheet metal parts that are a combination of areas that are developable( can be flattened onto a plane without distortion-"stretching"/"compression") and areas that are non-developable. Naturally, if we remove the areas that are non-developable the rest of the part has a Gaussian curvature(value=0) and hence 100% developable and can be unbent. We do not want to remove the non-developable surfaces because they are essential to the manufacturing process for the final product. We also have parts that are completely round with no flat surface that we would like to unbend. We need the ability to unbend conic parts that have a combination of surfaces that are developable and surfaces that are non-developable as well as the ability to unbend conic parts without any flat surfaces. both to flat (sheetmetal parts)
Hello,I have a weird freezing issue with Creo 8.0.7. I am using a notebook with a dock and when I have to disconnect and connect the notebook during the day, the Creo kind of freezes.The weird thing is that Creo works normally, but only the part, assembly or drawing window totally freezes. I cannot modify, zoom, pan, rotate - nothing.To fix the issue, I have to restart Creo. Luckily all the Creo functions works, so I have possibility to save the work. But restart the Creo with every dock reconnection is annoying.Could this be hardware (dock) issue? It is a Lenovo AF40 USB-C hybrid dock. There is no similar problems with other programs, like Autocad or Windows office programs.
HiAs i wasn't able to attend the event, i wonder where i can find the presentations delivered during the event ?Many thanks,
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.