Recently active
Hi, Need advise for my problem regarding my concern on displaying the next step instruction from Creo Illustrate. I need Vuforia to display the current instruction and the next instruction when user click on button. For now, the current step instruction are being displayed, but now I have to display also the next instruction. Hope anyone can advise me on this matter. Really appreciate it!
Hello all, We have developed Mobile project application. Is there any possible way to convert it to 3D Eyewear project ? Thanks in advance. /VR
I have attached below a screenshot in which a series of arrows are made visible after acquiring the target, however the arrows begin to move along a path indicating the direction of flow. Is this effect achieved by using a GIF as a 3D Image or TML-Text is used on that 3D Image.
Hi, I have an issue where when changing view on iPad, it launches a website and asked to authenticate my log in. After logging in its a blank page. This only happens when changing view.
I have created a simple user experience in Vuforia Studio platform and would like to import the same project in Unity 3D. Please advise me the best approach.
Hi I am facing problem when I publish. Getting error "Failed to upload the Experience Service"
Hi, The below message frequently appears when saving or publishing a project and it has the below effects: 1) Causes Vuforia Studio to become extremely slow 2) Sometime the massage run infinitely meaning I have to restart the browser session to start afresh and sometimes this means I will loose all unsaved changes. 3) I have a project with 2 pvi's that allows me to load different service sequences dependent on a click event 4) Project is not that big (project total size 159MB) 5) No thingworxs services are used Massage that appears: Reconnecting to Vuforia Studio...If this message remains or you're not prompted to refresh your browser, make sure that the Vuforia Studio application is running Has anyone experienced this if so what was the solution secondly are we able to use Visual Studio Code IDE for CSS and JavaScript Vuforia Studio dev and save successfully? Looking forward to your help, Thanks.
Hello, I have created a toggle button where the button toggles between play and pause whenever the user clicks on it. The binding properties available are forward, play, play all, reset, rewind and stop. However, when we use Stop property, the sequence stops after the step is completed. Is there a way to pause the step while the step is running at that instance?
I have an issue while I running the setup.exe on Windows 10 64bits: [25/06/2020 18:33:16] System.Deployment.Application.InvalidDeploymentException (ManifestParse)- Excepción de lectura del manifiesto desde https://studio-download.vuforia.io/downloads/Studio.application: puede que el manifiesto no sea válido o el archivo no se abra.- Origen: System.Deployment- Seguimiento de la pila:en System.Deployment.Application.ManifestReader.FromDocument(String localPath, ManifestType manifestType, Uri sourceUri)en System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)en System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNoti
Network Connectivity: Run below test to determine if there is an issue with your network blocking access to resources Chalk needs https://connect.vuforia.com/networktest Ensure that below ports are open: Some corporate networks may block UDP in their network configuration, which may prohibit use of Chalk within that network. HTTPS: 443 UDP: 10,000 - 60,000, 3478 Must have configuration for all Chalk users: global.vss.twilio.com, Port 443, Protocol WSS sdkgw.us1.twilio.com, Port 443, Protocol WSS ecs.us1.twilio.com, Port 443, Protocol HTTPS Additional regional connectivity requirements can be found here: https://www.twilio.com/docs/video/ip-address-whitelisting#media-servers See our Network Configuration Recommendations help topic for additional information Call Quality: 2.8 Mbps + is recommended for best quality At or below 0.5Mbps may result in poor call quality Remote users should enable 'low bandwidth mode' within call This enables remo
Hello I have a problem validaton the experience service URL, the log says error to connect ECONNREFUSED. And do not know if my ES URL it is ok. I import a project form another server and try to run in a virtual machine so the ES URL mix and do not know which of them to use.
Hi everyone, i just downloaded Creo Illustrate and got a e-mail with my licence pack (.dat-file). I saved this .dat-file into: C:\ProgramData\PTC\Licensing\ After starting Creo Illustrate i get the message: "Cannot find licence file", but the file is in this folder.What am I doing wrong? Thank you for your help!
When we publish an EDM model, with 3D note & dimension annotations, as an AR experience we do not see the 3D note or dimensions in Vuforia. Is there a way to see EDM annotations in AR?
Hi, I am currently working on a project which requires 6 different models imported from creo illustrate. I have successfully imported all the models and attached model targets and spatial targets on the models (view 1 has model target, view 2 has spatial target, view 3 has model target etc). I am also using those models on 2 different views each (view 1 has model-1, view 2 has model-1, view 3 has model-2, etc). With that said, I am currently facing some issues where the model target would only work for 4 of the models but not the other 2 which are imported the at the latest timing. Where there is also a bit of a glitch when I enter the view with the not working model target, where there are notable amount of bright purple pixels that appears momentarily. The other 4 different views are all working just the 2 latest models are not. The models on the 2 views that are not functioning have also been tested on a different project. They are all fully functioning there but not on the co
Hi everyone,i am currently trying to make a HoloLense experience with two views, where i can switch between these views with a voice command. I created an application event "Switch view" and linked it to the "Navigate" option of both views. This works fine, whenever i say "Switch view" it immediatelly switches. But now i want to make this a little bit slower, with a delay of 1second for example. I tried to use $timeout but: How do i use it and where do I have to write the command? (in Home.js or into the JS of the application event) Thank you all for your help!
In Vuforia studio the best way to interact with 3d model components is to define explicit 3d modelitems (widget modelItem). So this will be an easy way to access the componets and to change their properties e.g. setting of the color e.g.: $scope.setWidgetProp("modelItem-1", "color", "rgba(128,0,0,1)"); This will change the modelItem-1 property color to brown – and will display the component which is specified by this modelItem with a brown color. Another way to do this in javaScript is something like : $scope.view.wdg['modelItem-1']['color'] = "rgba(128,0,0, 1);";//brown $scope.view.wdg['modelItem-1']['opacity'] = 0.5;//set transparency to 0.5 //or for the same $scope.setWidgetProp("modelItem-1", "color", "rgba(128,0,0,1);"); //brown $scope.setWidgetProp("modelItem-1", "opacity", 0.5); //set transparency to 0.5 But in some cases during the project development it could be helpful when we are able to manipulate the compon
Hi, I was planning to manipulate the data coming from Thingworx Service using the following: return value.trim().replace("\"}]","").split("\":\"")[1]; with an example input being: [{"result":"Data"}] . I want to implement this code in the binding filter but the output will contain nothing. Please help.
Hello fellow Vuforians! We have been having a few issues when importing CATIA V5 models into Vuforia. It seems the models are 'too light' and we have received feedback to make them more 'realistic'. You can see this issue mostly in a circle or hole. While I believe that making the model as light as possible is super important, we also don't believe that a circle should be represented as a 4-sided polygon! I don't control the CAD Import process in Vuforia, you just pick your model and click on a box for 'Run CAD Optimization'. However, I find myself needing to control this (polygonal tolerance and scale, specifically). Does anyone know how/where to control this? If not, is there a separate procedure for converting the CATIA file with the settings of my choice? See example: Thanks everybody!
I'm taking the FUNDAMENTALS OF AR DEVELOPMENT WITH VUFORIA STUDIO course and it say to import the Airplane.pvz file which I should be able to download as part of the project files. Could someone please help me find the project files folder to download?
Hi guys, I added a scan on my experience to trigger an animation, and it was working fine until last month. For some reason it stopped working and now it does not read the barcode anymore. Also, when I try the preview, the scan widget does not show the Property Panel. Any ideas on what is going on? Could it be a software update? Attached is a picture of what I see on the preview. Notice that a property panel should be displaying, but now it does not.
Hi everyone, in my project I'm able to access metadata of PVZ and hide/unhide a selected component. So, how I could hide the parent of the selected component? For example, If my Bom is something like: /12512/325/12 /12512/325/13 /12512/325/11 /12512/325/100 When I selected 12 or 13 or 11 or 100 I want to hide all 325 groups. How could I access to this information? Thank You.
Good afternoon!There is a new "camera" widget in vuforia studio, but there is so little description on it.How can I send an image with this widget in service TWx:1. What type should be input service TWx?2. What data type should be a field in the database?3. Image Date transfers more string to 34000 characters, how to process it and then you can open the image using the links within TWx, or at least to download this picture?
Are there certain set of hardware and software requirements to view an AR experience in Spatial Target. If we were to configure a tablet, then what would be the requirements to configure it so that the device could support spatial target. Please mention all the specs like chipset, CPU, GPU, RAM, etc
Hello, I registered for the free Vuforia Chalk trial back around April 3rd and I have not received my activation email. I've received other email communications from the Chalk-Registration@chalk.vuforia.com email address. But not the activation email.
Vuforia Editor Bug fixes and minor improvements Vuforia Capture Bug fixes and minor improvements Vuforia View Bug fixes and minor improvements Vuforia Admin Center Bug fixes and minor improvements
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.