Recently active
I know about it is important to understand the environment around the ThingMark should have a lot of saliency,interesting features,texture. That is means stickers, complex parts ,cables, dirt and rust are good examples of salient features. But if we need match the real product that has plain colored areas and highly transparent with the whole body,what should I do?where can I put the ThingMark?giriAnkit GuptaImran BagwanQadir umar THANK YOU A LOT FOR YOUR REPLY~
I'm importing a .wrl file into Creo Illustrate. After the import I observe that the model has been scaled up almost 1000 times. For eg. When I measure the model in NX, it is 2000mm but in Creo it is 2000 metres. Why is it getting resized ? And the model continues to be too big in ThingWorx Studio as well. Please help. Are there any properties to be set before importing a file into Creo ?
This section describes new features and functionality in ThingWorx Studio 8.0.1.ThingWorx Studio• Support for HoloLens voice commands and gestures in preview• Bug fixes and minor improvementsThingWorx View• Support for changing the model dynamically (iOS and Android only)• Support for air-tap interaction with 3D augmentations on HoloLens• Display a gaze cursor on HoloLens• Bug fixes and minor improvements
When i scan the thingmark and bring up the experience,and then walk away/around from the thingmark, the model also follows.It doesnt stick to its location. It doesnt zoom out even when you are significantly away from the Thingmark..
Hello, If a company doesn't want to have a public Hololens experience (quite understandable), how can I create project in Thingworx Studio that requires authentication (username and password)? Thank you for answers, Best Regards, Bojan
Hi, I have a vehicle model where applied transparency to the entire vehicle except for a few components. All this was done in Creo Illustrate and saved as a PVZ file. But when the same is imported into ThingWorx Studio, unable to see the transparency.Thanks,Avinash
Hi i'm seonhoi look for Thingworx Studio Tutorials stepUse a ThingMark-Enabled Thing Template in an Experienceand i follow thatOn the General Information page, search for and select Vuforia.VuforiaExperienceService.VuMarkEnabledShape thing shape in the Implemented Shapes field. in thingworxbut that thing shape didn't exist and marketplace toowhere is that Shape?thanks
I have an experience in Studio and I would like to publish this experience programmatically without opening up thingworx studio, how this is done? is it possible?
Sure it can. 🙂On the current implementation of Hololens you can let cortana speak e.g. your work instructions:You can call a function from your application parameters (e.g. the parameter where you start the sequence with) in this example by:read();and in the home.js apply:$scope.app.read = function() {$scope.app.speech.say($scope.app.view.wdg['3DLabel-1'].text);}of course you can do more advanced things with it ...e.g. if you dont want to say the stepnames (1/8; 2/8; etc) and filter the text that is spoken:$scope.app.read = function() {var labelText = $scope.view.wdg['3DLabel-1'].text;var spokenText = labelText.substr(labelText.indexOf(" ") + 1); // converts "1/8 Whatever text" to "Whatever text"$scope.app.speech.say(spokenText);}Have funMartin
How can the virtual objects match the physical product? When I am going to put the sequence in the physical product just like I would expect in the real world ,but the virtual objects can't match with physical product. So...What's wrong with my operations? How could Imatch them together? And what is the key to interact with the virtual objects and the physical product? Thank you for your reply. Here is my screenshots and what Iwant to achieve.
I installed the thingworx viewer for this update. When scanning a thingmark though, the view becomes blank and basically the app is inaccessible and needs to restart. Just checking if there is something wrong I am doing, or if there is an issue.Vish
query select should be implemented to select components or sub-assemblies into modelitems
Is it possible to use a Thingmark to view a model within a HoloLens application we've written? If yes, how? If not, is that type of integration on the roadmap for the Thingworx View?
I've uploaded a scale 1:1 STEP-file into ThingWorx Studio and ticked the "Run CAD Optimizer". All did go well, BUT ... because it's a big model and the quality is the highest it doesn't run well on the hololens. So is there a way to control the quality of the imported model? In Creo for example, I can choose between, low / medium / high quality before publishing the model.
Now you have to select an object and bind the gesture or voice command to it. Can it be reversed? Say a command is predefined and object is a variable?I would want to say "move this left" and select an object, and the binding will happened on the bg
Hello,when showing my experience in the preview, every external data which is binded is shown correctly. When loading the experience on ThingWorx View on my smartphone, there is always only a random subset shown. When I exit the experience and scan the marker again the data which is shown changes (e.g. first temperature was shown and connection wasn't, after reload temperatur isn't shown anymore but connection value is shown). There are some subsets which occur more frequently than others, but all in all I have seen every live data that should be shown once, so in theory everything is working and the bindings are correct.Why does this occur and how can I fix this? Of course I always want every binded data value to be shown.Thank you for your answers.Edit: I use Android 6.0.1 with ThingWorx View 8.0.0.843. It worked fine on the iPhone of my colleague with ThingWorx View 8.0.0.
I wanted to animate the model within the Thingworx View but I don't currently have a license for Creo Illustrate. I instead decided to experiment with using model item manipulation via JavaScript within Thingworx Studio. I was able to successfully do a proof of concept with a simple electrical connector using both hand gestures and voice commands. I have attached the videos. Video 1 - Connector Explosion via Hand Gestures Video Link : 1943 Video 2 - Connector Explosion via Voice Commands Video Link : 1944
My organization blocks a lot of things on my system, so I want to share the different things I was going through to get ThingWorx Studio to work. We are working on Windows 10. We use app-locker to lockout several system-directories and each application which want to run out of these directories have to be unlocked by our system-admins So be sure that "ThingWorx Studio.exe" and "node.exe" are unlocked in C:\Users\<username>\AppData\Local\Apps\2.0\<id:1><id:2>\thin..udio_<id:3>\ where the id's are random numbers. Make sure that your CAD-converter tools also are unlocked. They are located in C:\Users\<username>\AppData\Roaming\ThingworxStudio\studio-download.vuforia.io\node_modules\cad-import-filters and underlying directories Uploading data from internal network was blocked by the firewall, so make sure you can upload your data. When you are using Direct Access outside your company, you're traffic is going through the firewall of the company and is also blo
Hello,In my project the "View Navigation Menu" is never hidden. I tried "Enabled" and "Hidden", nothing changes, it is still there. But in the quadcopter tutorial it works with "Hidden". So how can I adjust this setting in my own project? Why doesn't it work with that setting?Thanks a lot for your help.Lara
Hello,I got a real strange behavior of a sequence today. I used Display sequence step names from Creo Illustrate to show the sequence steps in a 3D label which works fine. I also use this workaround (Can't use more than one sequence animation in a single experience in ThingWorx studio.) to choose the sequence to play. In my other projects both solutions worked fine.So now the problem: I have two sequences in my model, the first one has 5 steps, the second one has 13 steps. In Creo Illustrate both sequences work fine. When I PlayAll steps of the sequences in the preview, it shows in the label as step names:for the first sequence: "(1/5)[...]", "(2/6)[...]", "(3/6)[...]", "(4/6)[...]", "(5/6)[...]" (in Creo Illustrate it shows only 5 steps overall)for the second sequence: "(1/13)[...]", "(2/14)[...]" and so on until "(13/14)[...]" (in Creo Illustrate it shows only 13 steps overall)Why does it increase the number of steps during runtime? How can I fix this?(I use Creo Illustrate version 3
Hello,I have a problem. I want make experiences in thingworx studio. I need see my part 1:1, but i don´t how do it.I need see real dimension from Creo.Can you help me please ?Thanks Martin
when i import a pvz model into studio, i am always confused about the coordinate system. when i change the "X Rotation" to 90 °, the model turn pic1 to pic2. i don't know where is the the origin of the coordinate system. but when i drag the coordinate system show within the model and rotate the model , it works well and behave as I expected( the origin point of the coordinate system is clear ).p1p2another problem, when i binding the 'slider' value to "X Rotation" property of the model(pic3), the model will rotate not as i expected.p3so how can i change the model's properties (locations) to the clear coordinate system within the model.
I have noticed what seems like a bug with model colors in an animation sequence. The colors are either wrong or are ignored when not all surfaces of the original model have the same color.I'm using Studio Version 1.12 (0.1.16.1485).Hoe to reproduce:- In Creo Parametric, add a different color to one or several faces of a model in an assembly of models. In my example, I colored some faces blue while the rest of the model is red. Two other models are uncolored (gray) and all red.- Use this assembly model in Creo Illustrate to create a sequence. Then publish to pvz.- Use this pvz in ThingWorx Studio. Create 2 views: one showing the animation sequence from the embedded pvi, and one showing just the static assembly. Publish and view using the View app. The colors are fine in the static view; but in the animation view, any models that employ multiple colors will have either no color (gray) or just one color. Other models that are colored with only one color appear correct.This is what I expec
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.