Skip to main content
Mar 26, 2014 11:41 AM UTC
Question

Re: Simulation of Thermal Expansion. [Please help...I am so frustrated]

Lawrence,

I took a look at your image, and it appears that you could apply symmetry, using just 1/8 of the model (if it's not symmetrical, then this won't work). You have identified simulation with shells. Could you not use volume regions for the copper fills and assign the appropriate material properties and run the model as a solid?

The below images is not your model, but the concept works when applying symmetry to three sides. You will not get singularities, because the three sides that have symmetry are not locked, but they slide along the plane of symmetry. The 1/8 aluminum cube has a 500 degree F thermal load, and you can see the global magnitude displacement for the model, as shown below. You could plot the displacement in X, Y, Z alone. For example, the Y displacement is shown below. So the total displacement in Y would be double of what you see 2(0.032") = 0.064".

If your model is not proprietary, could you upload it? This is an interesting problem to work on.

cube_symmetry_constraints.jpg

Figure 1: Symmetry Constraints

displacement.jpg

Figure 2: Global Displacement

displacement_y.jpg

Figure 3: Y Displacement

    1 reply

    Mar 27, 2014 8:29 AM UTC

    Thanks for your pictures, I now have a 1/8th model with me.

     

    I am trying to improve the approach by getting more infomation about the materials. Hopefully at the end of the day, I am able to correlate the simulation to the result of experiment.

     

    Lawrence