Recently active
I think you can make a sweeping cut in Creo Parametric 2.0. Just watch the attached video.http://www.youtube.com/watch?v=3umkwp8t_AA
The data exchange for assemblies is: step_export_ap214_asm_def_modeThis is for Creo 2.0, and you can see this in the attached pdf file.
You could use FloEFD with Creo for CFD analysis.
Attached is the latest config options from PTC for Creo 2.0 M100.
You start by process of elimination. After you open the part in question, you can start from the bottom of your model tree and suppress features until you find the problem.
First, I would open component T400204_GA (which is unconstrained in the assembly) and perform a save as and work on that component by itself to see why you cannot group some of the features. Look at some of the features and you will see a double wire box.
Hi Sasa,First, try to Group items 64 and 65 (Extrude 4 and Extrude 5). Is this an assembly?
Hi Kirby,You may scale an assembly or part by Model>Operations>Scale Model the enter the desired scale as shown in the below figures.Figure 1Figure 2
Hi Marius,The current config options is attached, which is also a searchable document.
Srikanth,You can change all the units in an assembly at once as shown in the below figure. Make sure you check Include Submodels, and this will change all components to the same units as the assembly.
Perhaps there is more than one problem within this discussion? I couldn't even mirror the attached part (pb113041.prt.1.zip). Could you?
Thanks Bill. That's exactly what I was looking for, because it defines all the options and it is a searchable document.
Gregory,First, there is not a way to list units in the Tree Column, and I have submitted a Product Idea on this. You may vote on it if you like in the attached link.http://communities.ptc.com/ideas/4021Second, yes, there is a way to change all the units in an assembly at once. See the below image.
Giulio,There is way to mirror and keep the features apart from the parent part, as I have demonstrated below. I mirrored the below part and kept all the features. This was performed under Save As>Mirror. So the software will work, but I couldn't do this with your part, as there are some features within your model that cannot be mirrored. Try suppress everything but your first feature and see if you can mirror it.Figure 1Figure 2Figure 3 Mirrored Part
Hello Gregory,If I understand your question correctly, you want to "take a list of parts and their respective materials and calculate the entire mass of an assembly and its components and ouput it as a list". I think Creo already has this capability. If you will look at the below image, I have a column that shows the mass of the assembly and each component. Then I generated a report that shows a list of the mass of the assembly and the components (Figure 1).As I build the assembly, Creo will calculate the mass of each component under Mass Properties. Just go to File>Prepare>Model Properties>Mass Properties and select the Calculate button, then Save.Then you will want to set the Tree Column to show the mass of the assembly and components. This will give you the at-a-glance capability of the entire assembly (Figure 2).This may not be exactly the way you want it, but it will give you what you want.Figure 1Figure 2
Here's the IDD instructions for Creo 1.0 (at least it's Creo), and the models that go with it.
Here's the IDD instructions for Creo 1.0:
Thanks Jakub...that's it.
Where can I obtain Creo IDD instructions? I have the IDD instructions for WF4 from PTC.
What does 2140864 do for drawings?
Creo does not have visible_annotations_scope Is there another method for creo?
When you're in drawing mode, perform a Save As and look for the pdf extension. Creo (Pro|Engineer) already has the capability to save drawings in the pdf format.
Go to: File>Manage File>Delete Old VersionsThis will delete all the old versions or "duplicates".
That doesn't work for me, as shown below.
Here's a discusson of a similar problem:http://communities.ptc.com/message/220717#220717
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.