Recently active
Ryan,I can like a response without being the one who submitted the question.
Lucas,I ran your model with 5% and 1% convergence in the regions of interest. Remember, von Mises numbers are all positive in the legend, but I got about 30060 psi max in the lower and upper radii. I only ran the model with the conditions you set up. I don't know what the physical system really looks like.
Lucas,SA-36 is steel, so change your E to 2.9e+07 psi. I used IPS units. But that should fix it, as you can see in the displacement plot below.
Steve,Thanks for the response...very helpful. I was trying to find someone who had the high-end graphics (4K), and I was wondering how it really works with Creo. I've used the M6600, and I'm very aware the of the M6800, which doesn't have the 4K resolution (I think M4800 does). The M3800 is supposed to be similar the new XPS 15, same body style, etc.
Well....I guess I stand corrected. Thanks.
Are you running gravity and static simulations under the same design study?Are you allowed to share the model?
Whenever the Top Participants are listed in the lower right portion of the web page, there used to be a link that stated "View All Participants". What happened to the link?
Yes...that's what I told my co-worker to do. I told him he can build a library of parametric gears in Creo. But he wants an interface to be developed for Creo similar to AutoCAD Inventor for gear design.
I miss it too...so Jive does have some disadvantages.
Thanks Thomas...I received the file, and I'll give it a try.
There are a plethora of books on Creo Parametric, if you're willing to purchase them. I got a 143 hits in Amazon.http://www.amazon.com/s/ref=nb_sb_noss/185-0928069-8302208?url=search-alias%3Daps&field-keywords=creo+parametric
Jack,I don't know what your edges look like, but if you're making a drawing from a surface model, it probably looks like the one below. You can change the edges under the system colors as shown below too. FYI.Figure 1: Surface DrawingFigure 2: Change System Colors Quilt and Volume Manufacturing to BlackFigure 3: Edges in Black
Dean,Thanks for the video...it's very educational.
Dean,No, they are not the same. I've posted a couple of links, one is a disussion where someone switched from SW to Creo, and the other is a Product Idea to add 3D geometry sketching to Parametric.https://www.ptcusercommunity.com/thread/126991https://www.ptcusercommunity.com/ideas/6187
.....at least SW has 3D sketching.
Thomas,Can you email me the file to -? I just tried to uninstall M050, and I'm still getting the same error message. Thanks.
Okay...then I'll amend it.
Don't hide config options that are beneficial to the end user.
Koen,You can reference an axis from another axis if the new axis is perpendicular to the reference axis, as shown below, but not parallel to the reference axis.
Here's where you have a problem:
You only using surfaces at first. Follow Mark's advice to make into sheetmetal.
Frank,I didn't have any problems converting these to sheetmetal mode, as shown below. The part that begins with G2, you have to shell it, and then select a driving surface to convert it. The other file, just convert to sheetmetal.
This also worked.
Selecting Stroke All Fonts corrected the text.
I'm currently using CR 3, and when I save a drawing to PDF, some of the text shifts either to the left or to the right.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.