Recently active
Can anyone recommend a way to round a vertex, such as the vertex of a pyramid or cube, such that the vertex is rounded but all the edges remain sharp? I'm sure I've done this before but I can't see any options for it.Thanks
We just installed Creo in the class room, some computers operate correctly, others ( including the instructiors ) will close the toolbar after each operation. That is to say, I open sketcher, draw a line, wish to continue with another line, but the sketching options close. I must click on the sketcher tool everytime I wish to draw a line section. Does anyone know what is going on? It is quite frustrating and makes the software almost impossible to work with.
Dear PTC users,Want to know about customization in Pro E using Excel file.so, if any body have an idea of linking the excel file to Pro e means, Please let me Know.Thanks & Regards
To All,If anyone has recently upgraded to Creo 1.0, and was required to write a justification, could you please share some of the more compelling reasons that were deemed acceptable to the powers that be? We are just beginning to collect data to support our move. We had a demonstration from PTC (canned, of-course), and the User Group here was very impressed.I'm sure Creo 1.0 has its own issues, so we would hold for Creo 2.0. I would appreciate any feedback, thanks!Regards,Charlie Graham CAD Administrator Research & Development Stryker Spine 2 Pearl Court Allendale, NJ 07401 t. 201.760.8149 f. 201.760.8349 c. 201.694.1851 charles.graham@stryker.com
This topic was covered about 15 months ago, but I'd like to know if anythinghas changed with the advent of Creo 1.0: is it possible to open NX files inCreo 1.0? Is an expensive translation module still required?Thanks. (Please note that I'm specifically interested in Creo 1.0, notCreoElementsPro/Wildfire5/whatever it's called) -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>
hello proe pros...my question to you:is there a significant difference between proe wf 3 and creo 1.0 ?I'm still using wf3.regardsal.
hello proe pros...how can I change the current system language? The language that is used for all the menus, sub-menus, and so on.thanksal.using wf 3.0
Hi. I have a custom FN symbol that has a left and right "quantity" (i.e., allow users to enter 2X, 3X, etc...). Is it possible to make the default variable text empty or blank? It's going to get annoying for the users to constantly delete that text and I'm just trying to save them the headache.Thanks.
Here is what I received. We were able to use these as start points todevelop a table we will eventually use.
(If this is a duplicate, please ignore - I didn't see the original in the Forum.)I get the following Compile Error "Argument not optional." What argument is it missing?Sub async_test() Dim asyncConnection As IpfcAsyncConnection Dim cAC As CCpfcAsyncConnection Dim session As IpfcBaseSession Dim descModel As IpfcModelDescriptor Dim descModelCreate As CCpfcModelDescriptor Dim model As IpfcModel Dim sessionid As IpfcConnectionId Set sessionid = New CCpfcConnectionId Set cAC = IpfcAsyncConnection Set sessionid = CCpfcAsyncConnection.GetConnectionId() Set asyncConnection = cAC.ConnectById(sessionid) <<<<<--Highlights ".ConnectById" including the leading dot. Set session = asyncConnection.session End Sub
I have a Creo Elements Pro Student Ed W5 in my laptop. I can't press or use 'Boundary Blend' button no matter what i do. The button is only gray. However, the Creo Element Pro at school, the boudary blend button works. I know that at school they also use Student Edition. I don't know why it doesn't work in my computer. Anyone? thanks
Hello! everyone How to cancel proe backup fuction?
Please explain the logic behind "Add Point" & "Delete Point" options. It does not work as I expect. After I think that I have deleted points and then go to add a new point, I find out that the last point I selected did not delete. The more I continue to add & delete the more confounded the curve becomes and I almost always have to delete the whole curve and recreate it.Give me any suggestions that will save me from having to delete the whole curve in order to put new points in.example: PNT17 needs to be added to the curve.Thanks,Kevin
hi,I'm using the student version of pro engineer.it was working properly for nearly one month and,now it doesn't work..also when i open the parts created with this version with the educational version at school,it gives me error messages saying some objects created with the student version won't be displayed.is there anyway i can solve this problem...
I'm relatively new to Creo, although I have quite a bit of history with Pro/E in the release 2001 timeframe. I'm working with some simplified representations and attempting to save some screen shots (File > Save As > ...) of various states. However, the overlay that says "On-Demand Simp Rep: XXXXXX" is always hovering there and comes out in the screen shots as well. Is there any way to hide this overlay temporarily while I am making these images?Thanks,Adam
Hello,We are planning on upgrading to creo elements/pro 5 (build M090) shortly. We will be using it with PDMLink 9.1/m40We have evaluated this build and have not encountered any "show stopper" type issues. Before we "jump in", I was doing a last check to verify if you have encountered any issues either with Pro/E or with it's PDMLink interaction that we should be aware of.Thanks in advance for a prompt reply!Tom Hoganthomas_hogan@verizon.net
Hi,I downloaded the free version of CREO ( Creo Elements / Direct Modelling Express 4.0) today, and have been working through the quickstart projects to familularize myself.I cannot find the quickstart file needed for "position parts" (the file I cannot find is called wheels.pk2)I have searched in local disk (C:) > program files > PTC > Creo elements >direct modelling 4.0, but have been unable to find the file. Where is this file located? Is there something additional that I need to download?Thanks for your time.
Hello, Ive just installed Creo Elements 5.0 in my new laptop and I get an Http 500 error when I try to view the help file. Im using Windows 7. Ive seen the help file work fine in other installations so must be my configuration.anyideasHTTP ERROR: 500INTERNAL_SERVER_ERRORRequestURI=/index.jspxCaused by:java.lang.NullPointerException followed by a long list of exceptions............
All,Sorry...I forgot that I posted this on 1/4/2012 and I did get some responses. Sorry for the re-posting.Sincerely,Neal RosenblumGeometrix Engineering, Inc.201 N. 13th AvenueHollywood, FL 33019Ph: 954-920-2049Fax: 954-920-9574Cell: 954-649-9399neal@geometrixeng.c
We recently installed Windchill PDMLink 10.0 and I amnew to this software. How do I find a list of users that are set up in PDMLink? Is there a way to pull a User report?
Guru'sWe want to name the default datums starting with the model name (i.e."modelname"_top, "modelname"_cycs_def).Is there a way to use the system parameter, "&model_name" to do this?Thanks
I have a face in my model which needs moving a small amount in an offset fashion. The only thing is, that face has a logo on it which isn't simple to re-apply. I'd like to offset the face and preserve the logo. The would take all of 5 seconds in AutoCAD or SpaceClaim, but I'm not entirely sure of a simple solution to do this in Pro/E. Does anyone have any suggestions?Thanks
I'm running Creo 1.0-m020.After exiting, I tried deleting the trail file, it will not delete because:[cid:image001.jpg@01CCDB3F.7C626EB0]Looking in the task manager I see this process still runningCreoagent.exe *32Killing the process tree allows me to delete the trail file.Running Windows 7 64bitAnyone else see this behavior?David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550
HelloHas anyone used the Expert Model Analysis and Best Practices Academy services from PTC?Were they helpful?ThanksJoe
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.