Recently active
In my effort to eradicate the quality agent and try to figure out where Creo 2.0 is getting my server registration information, I found this folder.C:\ProgramData\PTC\QualityAgentDavid HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550
Hello ,Does any one has any idea on how to enabel "Use default template" option in File-> New -> Sketch window ?RegardsAwadhesh
I like the local browser that is built into Pro/E and accessed from the side bar. The disadvantage is that it seems to forget the last folder you had open if you change windows. If not for this then I would replace the 'open' button the toolbar with a mapkey for the local browser. Does anyone know if the local browser can be configured to behave like the File > Open dialogue, or if there is another setting to specify that Pro/E should always use the local browser and always remember the last used folder?My main reasons are that the window size is better, giving a big useful preview, and the filters are at the top.Thanks
Daft decimal notation aside, can anyone tell me what to expect from Creo Parametric 2.0, other than decent icons?Thanks
Help needed Editing ASCII FontsCan anyone tell me how to edit an ASCII.SRC file so that the number one is not a straight vertical line and the zero has a slash through it? I need to distinguish between a number 1 and a letter "I", also zero and "O".I do know that I will need to compile it for each major release of Creo. 😞Doug P.
I'm looking for a five button mouse to use with Pro that will support double clicking with the thumb button. Does anyone have any recommendations?Thanks in advance!Kris
Hi All,I would like to know the possibility of mapping any Pro/E kinematics to JT / PLMXML lightweight format which will be useful for non-CAD users just for visualization. For non CAD users at client side the possibility to replay Pro/E Wildfire 4 kinematics based on JT and PLMXML data is strong requirement. How can it be done? Is there any loss of info during translation to JT format?Is it possible to capture kinematics in light weight format? If not possible in JT, then is there any other format which supports it?A complete different approach for solving the issue is also welcome.FYI: Pro/E WF 4.0 with TeamCenter 2007 is the current setup. JT files getting generated already. replaying kinematics by non-CAD users is the requirement.If you have any info, please share with me.Regards
Hi All,I am new to Pro/E and its terminology. I would like to know the possibility of mapping any Pro/E kinematics to JT / PLMXML lightweight format which will be useful for non-CAD users just for visualization. For non CAD users at client side the possibility to replay Pro/E Wildfire 4 kinematics based on JT and PLMXML data is strong requirement. How can it be done? Is there any loss of info during translation to JT format?Is it possible to capture kinematics in light weight format? If not possible in JT, then is there any other format which supports it?A complete different approach for solving the issue is also welcome.FYI: Pro/E WF 4.0 with TeamCenter 2007 is the current setup. JT files getting generated already.If you have any info, please share with me.Thanks and Regards,Raghavendra
anyone out there had the UNDO and REDO icons just suddenly go "greyed out"?they were working a few days back andnow they don't work anymore.even ->EDIT ->UNDO & ->REDO are greyed outWF4 / M210TIA
This week is my first serious work in WF5 (out clients are typicallyslow to upgrade), so I'm finding little annoyances that I'm sure most ofyou have already dealt with. In WF4 and older, there was an area at the bottom of the window thatwould show the name of the item that was highlighted on screen and wouldupdate with the pre-highlighting. . I'm not talking about the messagearea, but I'm not sure what it was called. It was very handy fordetermining what you were about to select. If I hold my mouse stilllong enough, I get a tool tip pop up with that info, but this wasinstantaneous. In WF5 it's gone, how do I get it back? Doug Schaefer
hello everyone,i hv made many reduction systems and never consider to show inovlute profile to worm gears/ spur gears cause i didnt wanted to give extra time to make those patterns and it may also decrease mobilty of model.. now i wish to know how to do it? if anyone knows how to make a perfect involute profile for worm wheel to match worm's thread plz post here i'm also looking for bevel....Thanx and RegardsDalbeer Singh Sohal
Good morning.We are running Creo Elements/Pro 5, build m90. We recently upgraded from Pro/ENGINEER WF3, build m240.In WF3 detailing, user could select the arrow to quickly escape/exit from a command sequence. This arrow is no longer available in Creo Elements/Pro 5. If in the middle of a detailing command in Creo, what is the best/easiest way to exit from the command?====================================Thomas HoganOffice Phone : 508-490-3462Email : -
I've know that a Mapkey command can include a value to be inserted into a text field, but is there a way increment the current value, so that each push of the key would increment by say 0.1 making the value increase from 1 to 1.1 to 1.2, 1.3, 1.4?Thanks
Turns out there are at least 4 SPRs on this (2058777, 2056036, 2053206and 2034046), reported in WF5 M060, M070 and M080. All reportedresolved in M110, so I'm off to download an update, likely M130, thenewest WF5 available. Doug Schaefer
Is there a way to accomplish this? There appear to be some "standard" ones that Pro thinks I need that I actually do not. The option to remove them is greyed out. Is there another way to remove?Thank you!
hi i am a novice user but i really wanna master the art of cad via creo, i need tutorials will somebody help me??????
what is blend
see picif i change connection from cylinder to pin it will show its name but not in cylinder connection why?? unable to find.....
A lightbulb just went off for me ion the use of the PTC_WF_ROOTvariable. Do I understand you right that setting PTC_WF_ROOT will makePro/E store the stuff they bury buy default deep in the windows userprofile folders to a folder of my choosing? That would be the favoritesin WF4 & WF5 and now the creo_parametric_customization.ui file in Creo1.0+. If so, can I set it to a network path? That would solve myissues with Creo and .ui files. Oh, and setting 'load_ui_customization_run_dir yes' will force Creo 1.0to load & store the creo_parametric_customization.ui file from theworking directory. Doug Schaefer
Hi gang, Does anyone know how to convert a real number to an integer in a relation? Something like: "SEGMENT_QTY=(INPUT_RADIUS*2*PI)INT" Or do I need to create a new parameter of integer type and set them equal.? Thanks -Nate
This solution is not consistent. I still get windows that popup behind Creo.When I first bring up Creo 1.0, and pick new file, I get a prompt to log into PDMLInk. That prompt will now come to the front more than it used to. It used to always go to the back. But depending on what I have picked in Creo before picking new file, sometimes it still pops up behind Creo.David Haigh
Can Cocreate files be read into Creo Parametric and be fully parametric/intelligent models? Or do you have to pass through Creo Direct first?
I am trying to output the block numbers at the beginning of each block.(e.g. N1...,N2....) what do I set in the Option File Generator for this?Thanks
This has been bugging me since I got onto Windows 7. How do you get the popup windows to come to the front. They always seem to popup behind ProE/Creo.I don't know how many times I've waited for the software to respond when really it was just the stupid window was behind, but it's a bunch!Is there a way to fix this?David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.