Recently active
Can anybody help me in Mechanica Modes How to use properly the independent mode of Mechanica
can you use wild fire four with mechanica to test plastic oil tanks made from meduim density polyethylene for lateral loads, or can mechanica handle plastics.
Hello, everybody!Is it possible to copy a subassembly from one folder to another so as the parts, which it consist of, don't get suffix "_" at the end of their names?When I do it now I usually get these:Nut_M8Nut_M8_ Screw_M6Screw_M6_Washer_12Washer_12_and so on.Thank you in advance.Best regards, Vladimir.
All,Any company recommendations for 3D Laser Scanning?Thoughts on service and price?WayneF
Uhh, having a brain meltdown. Using Wildfire 4 and don't see dual dimensioning so I can set to PRIMARY[SECONDARY] anymore in the options. Any ideas?
Time for another Colorado PTC User Group (COPUG) Meeting! Please join us in welcoming all users at this Friday April 27, 2012Lunch will be served (12:00 PM), along with Raffle Prizes & PTC Product Demonstrations.–The CSU FSAE team will be showcasing the 2010 & 2011 season cars, as well as a demonstration with the 2009 car. A tour of the Mechanical Engineering Research Center (MERC) is included. Don’t miss it!Topics include: "What's New in Creo Parametric 2.0""Pro/Engineer Techniques for Rapid Military Vehicle Development""Ram Racing Implements Creo Elements/Pro"Come one, come all!Sean SullivanVelcon Filters LLCCAD Administrator / Product Development Engineer
I have a .png file attached showing tolerances and balloons created while in sketcher of another software product. My questionis can do the same thing in Creo 1 while in sketcher and maybe using relations somehow?Thank You
I assume there is nothing. However, I was wondering if there is some way (that I have been missing) of doing more than just merely creating a tangency contraint between two spines etc in sketcher. For example, in Style, when you create a tangency contraint at an endpoint of a line/curve, you also specify the "amount" of tangency by entering a magnitude value or dragging a handle. It's like an illustration software like Adobe Illustrator etc.However, in sketcher there is no such way of controlling the "amount" of tangency? Do I have that correct? Just checking. It would be so much nicer if you could do this.
This movie shows some examples for potential Kinect integration into 3d CAD Creo Parametric.
I just noticed that Creo Direct 1.0 & 2.0 both leave the creoagent process running after exiting.I just opened up a call with PTC for the problem.This was fixed in Parametric 1.0-m030SPR is here:
Hello, everyone.Is there a way to show thread on model surfaces in case I use shaded with edges model display?I didn't have this kind of problem in other CAD systems like SolidWorks or Inventor.But now I have to switch from shaded with edges model display to wireframe or hidden line model display every time I need to see thread on model surfaces.Best regards, Vladimir.
Wondering what sites you are using to find info, tips, and tricks. Here are a few of mine...http://www.codexcreo.com/http://portal.ptcuser.orghttp://learningexchange.ptc.com/
wow this is crazy check it out
PlanetPTC Live in Stuttgart 15th-16th November 2011. B&W software - worlds leading developer of additional software for Pro/ENGINEER and Creo Parametric - participated to inform customers about current developments and efficiency gains through customized software solutions. Microsofts Kinect control opens a wide range of innovative applications in Creo Parametric from analysis to model manipulation. Furthermore Mircosofts Kinect offers a funny way to access the world of 3d CAD 🙂 (view in My Videos)
Anyone have or seen of a list of common std.out errors and meanings?ThanksTerry
Greetings,Anybody have a PCF file for a HP DesignJet T790 roll plotter they'd be willing to share?Thanks,Mark
Agree - each year, we've had a planning meeting w/multiple people attending, and one by one went thru each time slot and agreed what each person would attend.
I need to make two chamfers: one between pts 3&4 and one between pts 2 & 5.When I go to select the transitions, I can't select the middle piece; it will only allow me to select the ends. When I choose pt 3, it flips the chamfer to the left of pt 3, when I need it to go to the right. Same when picking point 2 - it flips to the right when I need it to flip to the left.Hopefully someone can help.....I've tried stop case as well, but can't seem to get it to allow me to pick two points after I pick the transition. Thank you!
Please tell me that there is another way to save the output from mass props other than an HTML file? Text file at least? Word doc? Excel?Thanks!
Brent, Thanks for the reply. You were one of two replies. We rarely use theplotter for CAD work these days also. Must be no one else is evencarrying a plotter any more. I think we would not except for themiscellaneous plant use. I'll let you know what we find with the T790. On a separate issue. We are considering an update from WF3. Myquestion is to what? Is there significant advantages to Creo parametricover WF5 (unsure of the correct notation here)? Can an argument be madeto stay with WF3? I don't mind using old tools so long as they do whatis required efficiently. Regards, Jim JakubosRexair LLCProject Engineer
How do I go about ceating a 90 degree bend in a cylinder?Thanks,David
While Creo has nice taskbar integration, Pro/E won't even pin properly. For all my efforts I haven't managed to get a Pro/E icon that looks like Pro/E to launch the app and be grouped with the open windows.I wondered if anyone had written their own launcher for Pro/E that shared the necessary tags to be grouped with the Pro/E windows? If so, please could you share it?Thanks
If your setup is like ours, you have several PDMLink systems. We have:* Production* QA* DevI would like to have these as separate environments each with its own cache. That can easily be accomplished using "set PTC_WF_ROOT=" in your startup script.So I created a cache folder for:* Production* QA* Dev* No PDMThe problem is, only two of the places PTC is now storing the server location is in the cache. They are also storing the location in:%USERPROFILE%\AppData\Roaming\PTC\Creo\Platform\2.6\ServerMgr\.srv_mgr_db.fldxThis location is common, so anytime you startup Creo it's going to look in this file and find the last server you registered.I've had to modify my startup script to delete this file. These are the first two lines of my startup scripts. They ensure that Creo 2.0 only reads the server location from the cache file.tskill creoagentdel "%USERPROFILE%\AppData\Roaming\PTC\Creo\Platform\2.6\ServerMgr\.srv_mgr_db.fldx"David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore N
So one more thing. This was the same problem Creo 1.0 had and was fixed in the m030 maintenance release.What I did prior to m030, was add this command to my startup script:tskill creoagentDavid Haigh
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.