Recently active
Basic polygons are available in Sketcher from the sketcher palette.Thanx all
Good morning all I may be wrong but I thought Proe once had a command for extruding a polygon (hex, octagon, etc). How do you now build a polygon? Thanx Paul
Hi creo community,does any one know how to create and where to store creo direct start templates in mm, kg, s, C.Thanks for helpGerald
The icon designation is enough for me to tell something is grouped. Is there a way to remove the word "group" from the group name?Thanks!
Does anyone know what the process nmsd.exe is for, and can I turn it off? I have tried to play with the setting in my .psf; ENV=NMSD_TIMEOUT=300 to reduce the value assuming this was seconds? I thought by changing the value the nmsd process would stop after I close Pro/E. However when I change this value, I start to see some strange behaviour in Pro/E. I have a workflow which is moving my folder to a server, however I have to wait for the nmsd.exe to stop to be able to move the folder. It seems to be related to the std.out, I'm not sure what this is doing.
Alan Belniak was able to attend and capture Brian Thompson's session on Creo's Roadmap.The agenda included:Creo StrategyCreo Technology RoadmapCreo 2.0Catch Alan's recap and view the presentation replay.
How long should it take to upgrade your out-of-date Pro/E maintenance from the time they have your money and the time you are issued codes?I signed and provided payment for bringing my maintenance up to date on May 15th, 2012. I received a payment receipt as of May 16th, 2012.I -finally- received my Software Order Fulfillment Confirmation on May 25th, 2012 after making a significant number of calls to PTC and starting many service requests on that day. And then I am told that it will again take several days to get my new codes for Creo Parametric 2.0.Is this reasonable? How long did it take from making your payment to receiving codes?If this doesn't get resolved by Tuesday, THE 29th! I'm considering calling the AG's office.Anyone else just get put on the back burner getting your maintenance re-instated?
What are the points for? Does anyone know?
I am a relatively new user, and we just purchased Creo. As I am looking to find my way around the menu, I found a command "Model Size/ Bounding Box. When I click on it, I see a green box with a diagonal line from the upper right hand corner to the lower left hand corner. Upon further investigation, the box does not show the limits in X Y or Z. It is longer, wider, and narrower than the model. It can also, not be measures.Just exactly is the use of this command?
Sehr geehrte Damen und Herren, wir haben unserem Windows Server R2 eine neue Netzwerkkarte hinzugefügt. Wenn wir nun über lmgrd.exe –c [Lizenzpfad] den Lizenzserver starten wollen, schlägt es fehl, da immer die neue Netzwerkkarte vom Tool cpu_id.exe genommen wird. Auch wenn man die Priorität ändert (siehe Link: http://support.microsoft.com/kb/894564/de) so wird immer die neue Netzwerkkarte beansprucht. Nur wenn die neue Netzwerkkarte deaktiviert wird, wird alles sauber ausgeführt. Wie kann ich das Problem lösen?
Can someone give me the dope/layman explanation of the "Options Modeler" package? I read the official blurb description on PTC's site and was more clueless and dumberafter having read it.Are Lawyers writing this stuff now?
Is there a way to change the K factor system wide?I know that I can change it with edit definition on each bend, but I'd like to change it system wide.We work with metal steel plate, usually thicker than 15.7mm, and the designated K factor (0.318) is not correct, according to my supervisor. Please let me know and thank you!
Conflict.Hello, I would like to know how to disable the screen that appears in Creo 1.0, which was not created mass "conflicts" (mass properties are not calculated) next image in question has a solution or not.grateful. ........
Is anyone besides me getting annoyed at the spammy advertising messages that have come through the list frequently? I would think that we had some sort of policy for this, or am I mistaken?Kris M Rowlands
I need help offsetting or thickening this quilt. I have tried to do it several different ways. I usually get an error of some surfaces are self-intersecting. I need to offset the quilt by .015" in both directions for a total of .030".
don't know who I'm going to have to talk to get that fixed. &nb
Hi,I am wondering how you change the measurement units in creo parametric 1.0 e.g. mm, inches, etc.I have tried and tried but can't find how.Many Thanks
Hi,Actually i need to make use of "getFolderPath(CabinetBased object)" .It is in wt.folder.FolderHelper apican any one brief me how to initialize CabinetBased object in windchill 9Thanks in adavnce.Regards - Raj
Had a client recently mandate all their data must be managed through ProjectLink. Does Windchill have to be installed at each supplier in order for data to flow without issue?thanks
Hello all,I create .stl files which are used by our software guys to program a robot. I was asked today about the options which I used to create my .stl files. I showed them the small option box which come up when I save a .stl file. What they were wanting to know was which triangulation algorthm is used and if we have any options about picking them.I told them I would look into it. But typical google searches have failed me. Perhaps I am looking for the wrong thing.They gave me a link and told me that they would like to use something like this.http://en.wikipedia.org/wiki/Delaunay_triangulationHopefully I am providing enough information. I still need to go do some reading to figure out the details. But does anyone know if you can pick the algorithm usded for triangulationThank you in advance,Josh
how to enable creation of jpeg file for the model or asm in proe wf3. Is there any preference or something specific to that ..?
I am looking for something that shows differnt symbols and icons used in Creo. Specifically symbols used in the Configuration Ediitor.
Is there a re-form/bend back after flatten form?
All,Am looking at refreshing our materials libraries prior to going to Creo, wondered if any of you had a xl spreadsheet or something they would be willing to share that has various materials and their material properties or a good online resource to get this information so I can create the new mtl files.Just trying to save some time trawling through the engineering handbooks checking everything again (Although will check anything I get back)Cheers all
Eagerly waiting for PLanetPTC 2012 Orlando. Last year had fun and interesting time at Las Vegas, hoping to get more at Orlando!!!will be displaying two products at Geometric booth # 611 both Creo Ready!! during Solutions Expohttp://www.dfmpro.comhttp://www.geomcaliper.comlove those networking sessionRegards,Prashant
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.